Removed the image inside quotation to save diskspace!
Yes, me too. But the texture 'rebuild' lasts only 5 to 7 seconds here. FYI, I'm using: Intel i7 6800 4 GHz CPU, 32 GB DDR4 RAM and a NVIDIA GTX 1080 GPU. Seems this HW configuration doesn't suit for this update. Didn't fiddle around with SW settings, let them as they were.
[From the 'TRS19 SP1 Now LIVE' thread - see below]
I have been experiencing terrible lag with trains lurching along in spurts even though FPS was still not that low. This didn't happen before in TRS19 on my (own) route. I thought that maybe it was something new in my setup like adding progressive track.
I have an RTX 2080 GPU and 16GB RAM, which it used up in seconds flat. Before I changed the pagefile/virtual (RAM) memory to AUTO it ran through the 16 GB and crashed. Now it just limps along. I tried setting the visual performance settings lower and barely any change. It's like the whole route was loaded into RAM/pagefile and now is now having to roll of bits into pagefile and back all the time. Certainly something is now creating a bottleneck. I have not tried the TrainzUtil prebuild command and was not using the Developer settings.
For reference my system specs are below. I'm have the TRS19 data on SSD2 & TRS19 program on SSD1. TRS19 build 105100 (Trainz Plus). I am putting this on the 'Trainz Plus Update 3 is now LIVE' as well as the 'TRS19 SP1 Now LIVE' thread for information.
Peter.
--
SYSTEM
GPU: Gigabyte GeForce RTX 2080 GAMING OC WHITE 8G
SSD1: Samsung SSD 850 EVO 250GB
SSD2: 2nd SSD: Samsung 860 EVO 1TB SSD SATA
Mobo: AX370-Gaming K3 (rev 1) - Gigabyte AX370-GAMING K3 AMD X370 S AM4 DDR4 SATAe ATX Motherboard - Black
CPU: AMD Ryzen 5 1400 Quad-Core Processor - 3.2GHz/3.4GHz Summit Ridge
RAM: Corsair CMK16GX4M2B3600C18 Vengeance LPX 16 GB (2 x 8 GB) DDR4 3600 MHz XMP 2.0 High Performance Desktop Memory Kit - Black
Hard Disk: WD Black 4 TB SATA Hard Drives ( WD4003FZEX )