UK Screenshots for Pre BR Blue. High resolution warning.
- Thread starter lner
- Start date
They certainly are a nice addition, Ken. Barney and I have had an E4 on the commission backburner for a while, but it looks like we'll have to step up our game when we finally decide to roll one out of Brighton Works! Either way that's one more loco ticked off the list for my Bluebell Railway Project!Amazing what can be found on TtTE sites :::: https://vicarstowntranspor.wixsite.com/vicarstown-transport
Cheers, evilcrow
Testing out the new LBSCR E4 with Barney's new BR Milk Tankers. These are some of the best wagons he's put out yet and well worth the purchase!!
The SR ran regular milk trains from the Western Division at Seaton Junction all the way across to the Eastern Division with Lewes or Polegate as an interchange point between them. The E4s, E6s and K Class locomotives took it in turns to run the milk trains to these stations where another locomotive would take over and run the remainder to Hastings and Dover via the Marshlink Line.
LandYRailwayMan
New member
After pulling these into TS19 I have three missing KUIDs.Amazing what can be found on TtTE sites :::: https://vicarstowntranspor.wixsite.com/vicarstown-transport
Cheers, evilcrow
<kuid2:217537:100255:7>
<kuid:489313:802007>
<kuid:248319:100255>
Any ideas where these can be found (and why they aren't in the original download)?
KotangaGirl
Pre-Grouping Railways Nut
<kuid2:217537:100255:7> Invisi Cab Legacy.
<kuid:489313:802007> (#1TFM) Steam Texture
<kuid:248319:100255> NWR No.1 Whistle
It's fairly common to have to play 'hunt the dependency' all over the internet with TtTE websites.
<kuid:489313:802007> (#1TFM) Steam Texture
<kuid:248319:100255> NWR No.1 Whistle
It's fairly common to have to play 'hunt the dependency' all over the internet with TtTE websites.
IDK where to find the invisible cab, maybe a Sodor Workshops loco seeing as its made by GDennish but the other two KUID's are here
NWR No 1 – Google Drive
drive.google.com
for <kuid2:217537:100255:7> Invisi Cab Legacy
brendambay3d.wixsite.com
or
ironcladinsteam.wixsite.com
Home | BrendamBay3d
Brendam Bay 3D is a site that provides trainz content for users who are in search of it
Home | British Loco Works
The official British Locomotive Works, producing authentic content for Trainz since 2021. Explore to find out more about what we do.
KotangaGirl
Pre-Grouping Railways Nut
'Cecil the Aberdare' who may be found here .....https://vicarstowntranspor.wixsite.com/vicarstown-transport/copy-of-tvs-subpage-1
Cecil has a selectable smokebox door as well as a very superior looking face.
'Cecil' is just the engine I need for 'Tristyn in Winter's pre-grouping session so thank you very much.
Cecil has a selectable smokebox door as well as a very superior looking face.
'Cecil' is just the engine I need for 'Tristyn in Winter's pre-grouping session so thank you very much.
spitfire98462
Well-known member
A new what if tank engine has dropped for the 15th day of Vicarstown christmas calendar a LSWR 700 tank engine.
Looks very nice, reminds my of my first loco! also an aberdare! would love to make a new one someday! lovely model!'Cecil the Aberdare' who may be found here .....https://vicarstowntranspor.wixsite.com/vicarstown-transport/copy-of-tvs-subpage-1
Cecil has a selectable smokebox door as well as a very superior looking face.
'Cecil' is just the engine I need for 'Tristyn in Winter's pre-grouping session so thank you very much.
KotangaGirl
Pre-Grouping Railways Nut
I remember your Aberdare. I'm sure I still have it archived away on one of my backup hard drives.
An amazing loco to be sure. That must seem like a lifetime ago eh Barn?
Testing out LEP's LSWR - "730 Class" - as I have named it - on the famous Tarantelle Branch:
Last edited:
LandYRailwayMan
New member
for <kuid2:217537:100255:7> Invisi Cab Legacy
orHome | BrendamBay3d
Brendam Bay 3D is a site that provides trainz content for users who are in search of it
Home | British Loco Works
The official British Locomotive Works, producing authentic content for Trainz since 2021. Explore to find out more about what we do.
Many thanks to all who replied.
The 'Bear Hunt' continues...
Success with all but the cab. There is an older version <kuid2:217537:100255:4> on the DLS, but everything I download so far failed to supply v7
until I did a google search:TRAINZland - Invisi Cab Legacy
A invisible interior for use on any model. This has outside-visibe-from-cabin enabled so you can see the outside of the model without a extra mesh. You may use in your own release as long as you credit me.
trainzland.ru
I had similar problems with the 15th model (LSWR class 700) too, but now solved.
I'm learning slowly.KotangaGirl
Pre-Grouping Railways Nut
Excellent screenshots Tanker. The Tarantelle Branch is pretty darn impressive.
Almost a 'snap' situation as I've only just now got my rebuilt version of Driver_Col's 'Milbourne James' shifted over onto my Linux computer.
Whatever the provenance of Lep's LSWR class '700' locomotive it's certainly a nice piece of work.
Excellent screenshots Tanker. The Tarantelle Branch is pretty darn impressive.
Almost a 'snap' situation as I've only just now got my rebuilt version of Driver_Col's 'Milbourne James' shifted over onto my Linux computer.
Whatever the provenance of Lep's LSWR class '700' locomotive it's certainly a nice piece of work.
I’m afraid I need to ask, because looking on the DLS and Google brought up nothing: where can I get the Tarantelle branch?
georgem2010
Trainz 2012 route builder
Good Morning All!
A special delivery arrived in my mail box this morning.
I asked Gary (gplocomotives) if he would repaint one of his 3F Jinty's into this livery for a 1913 Fowler rebuilt MR 2441 Class.
Clearly, the 2441, even in rebuilt condition, has many differences to the Jinty, but it's a great substitute. And I'm sure will see a lot of use on my lines.
Another loco for my MR shed
A special delivery arrived in my mail box this morning.
I asked Gary (gplocomotives) if he would repaint one of his 3F Jinty's into this livery for a 1913 Fowler rebuilt MR 2441 Class.
Clearly, the 2441, even in rebuilt condition, has many differences to the Jinty, but it's a great substitute. And I'm sure will see a lot of use on my lines.
Another loco for my MR shed
KotangaGirl
Pre-Grouping Railways Nut
I remember you saying that you were going to ask Gary if he could do a Midland 'Jinty' for you. Perhaps not 100% accurate, but it does look good.
georgem2010
Trainz 2012 route builder
Yes I'm very pleased with it as a place holder and to work alongside your 1F. You might be interested to know that the photo is taken at Bromsgrove, probably on banking duties or shunting the wagon works.