Trainz Update Announcement (SP5 HF)

I had all the games installed on WD HDD, a year ago I bought a regular Kingston SSD SATA 3 for games. The DBR took five minutes on HDD, and it takes half a minute on SSD.

The SSD differs greatly in the speed of processing small files. This difference can be seen in the bottom two lines of this test:



And I recommend regularly checking the status of the disks via SMART. I saw in advance the approach of dying for several disks and successfully replaced it.
I took a screenshot of such a dying disk a long time ago, from which I immediately successfully copied all the data.
It's in Russian, and there's a large yellow label that says "Alarm!" , and a yellow dot marks the ID reason of that attribute.
I can also use SMART to determine which disk is already on its way to receiving a "Alarm!", it was C8 attribute with an ever-increasing RAW value:

 
Last edited:
Strangely, I did not realise that my desktop computer had an SSD as its main drive (it must have been in the specs somewhere but true geeks do not read the manuals). I did notice that its disk read/write times seemed significantly faster than what I expected. It was only when I decided that it was time to defrag the drive that my disk management software informed me that it was an SSD and did not need defragging.😯
 
It was only when I decided that it was time to defrag the drive that my disk management software informed me that it was an SSD and did not need defragging.
You should trim the SSD periodically. This will help reduce the wear down on the SSD. Windows defrag will do that automatically and you can do that from the command line if you want, or use the application.
 
next week hardware upgrade with rtx 4060 ti, 32 gig memory and ssd samsung 990 pro 4 tb .
You'll love your new 990 Pro SSD. Same as mine, which I installed as my C: Drive. Super fast and makes a huge difference for Trainz EDBRs and TrainzUtil.exe operations. (My current production/ gaming rig has five SSD drives for a total of over 10Tb physical storage space.) Each Trainz installation is on a separate SSD drive, so I can monitor their individual performance.
 
Bonjour a tous,

certains d'entre vous ont ils des difficultés a passer a SP5. Actuellement sur trs22 PE Sp4 build 126273, j'ai tenter plusieurs fois de faire la mise a jour du SP5, mais a chaque fois elle ce coupe pendant le téléchargement et j'obtiens toujours le même message d'erreur. Avez vous des idées de ce qui peut causer cela?

Amicalement Aurélien

Hello everyone,

Are any of you having trouble upgrading to SP5? Currently on trs22 PE Sp4 build 126273, I've tried the SP5 update several times, but each time it freezes during the download, and I keep getting the same error message. Do you have any ideas as to what could be causing this?

Sincerely, Aurélien


 
Currently on trs22 PE Sp4 build 126273, I've tried the SP5 update several times, but each time it freezes during the download
That is most likely (in my experience) caused by an external factor such as your Internet connection or another app running that may be blocking or interfering with the download.

Some suggestions - based on my experience in dealing with similar issues:-
  • Are you using a VPN? If so disable it and try again
  • Have you added trs22.exe to your antivirus realtime scan exclusion list?

Translation:

C'est probablement (selon mon expérience) causé par un facteur externe tel que votre connexion Internet ou une autre application en cours d'exécution qui peut bloquer ou interférer avec le téléchargement.

Quelques suggestions - sur la base de mon expérience dans les problèmes similaires: -
  • Utilisez-vous un VPN? Si le cas désactivez-le et réessayez
  • Avez-vous ajouté TRS22.exe à votre liste d'exclusion de numérisation en temps réel antivirus?
 
Bonjour,

merci de votre retour, malheureusement j'avais déjà tenter cela avant mon post, TRS.exe est bien exclu de mon antivirus, et je n'ais pas de VPN, j'ai même tenter en désactivant complément l'anti virus et j'obtiens le même résultat. Ce qui est très curieux, c'est que le 22 mars, j'ai fait le passage au SP4 car a mon installation de Windows 10 l'été dernier, j'avais oublier de le faire, et tout c'est très bien passé.

Amicalement Aurélien


Hello,

Thank you for your feedback. Unfortunately, I had already tried this before my post. TRS.exe is indeed excluded from my antivirus, and I don't have a VPN. I even tried completely disabling the antivirus, and I got the same result. What's very curious is that on March 22nd, I upgraded to SP4 because I forgot to do it when I installed Windows 10 last summer, and everything went very well.

Sincerely, Aurélien
 
Bonjour,

merci de votre retour, malheureusement j'avais déjà tenter cela avant mon post, TRS.exe est bien exclu de mon antivirus, et je n'ais pas de VPN, j'ai même tenter en désactivant complément l'anti virus et j'obtiens le même résultat. Ce qui est très curieux, c'est que le 22 mars, j'ai fait le passage au SP4 car a mon installation de Windows 10 l'été dernier, j'avais oublier de le faire, et tout c'est très bien passé.

Amicalement Aurélien


Hello,

Thank you for your feedback. Unfortunately, I had already tried this before my post. TRS.exe is indeed excluded from my antivirus, and I don't have a VPN. I even tried completely disabling the antivirus, and I got the same result. What's very curious is that on March 22nd, I upgraded to SP4 because I forgot to do it when I installed Windows 10 last summer, and everything went very well.

Sincerely, Aurélien
Do you try to make the update as an adminstrator, that ist with your administrator account? If not, that may be the reason for the error.

Regards
Swordfish
 
6 hours later and I am still waiting for the rebuild to complete.

Currently at "checking for faulty assets(582177 / 727260)"
26871 (and increasing) What does this figure mean? Surely I don't have 26K+ faulty assets?

Anybody know?
Have you checked the release assertions are not active? The latest build will show assertions during the rebuild and need to be cancelled before the rebuild can continue.
As for the failed download, is there room on the C drive?
 
Last edited:
Asset Groups Bug Fixed!
We’re happy to announce that the "Asset Groups" bug in SP5 has been fixed with our latest hotfix update! This issue affected the placement of trackside objects on certain splines, but thanks to your reports and our investigations, we’ve resolved it.

What Was the Issue?
The bug was caused by a database repair process that could corrupt asset compatibility data.
It affected DLS and locally installed splines. Built-in and packaged DLC content were unaffected.

What’s Changed?
The hotfix ensures that affected splines and trackside assets now work correctly.
Users no longer need to apply workarounds—the issue has been resolved.

Looking Ahead
We’ve improved our testing and release processes to catch similar issues earlier.
We’ll continue refining our communication to keep the community better informed.

Thank you for your patience and feedback—your support helps make Trainz even better!

Update your build
The following are the latest SP5 hotfix builds:
  • 129410 TRS22 (Mac App Store)
  • 129393 Trainz Plus (Mac)
  • 129392 Trainz Plus Steam (Mac)
  • 129388 TRS22 Steam (PC)
  • 129384 Trainz Plus Steam (PC)
  • 129383 TRS22 Steam (Mac)
  • 129343 Trainz Plus (PC)
  • 129339 TRS22 (Mac)
  • 129335 TRS22 (PC)

Change log (128486 to 129343)
  • [Fix] Database Repair marking newly cloned routes to unknown location
  • [Fix] Extended Database Repair asset corruption
Hello! I am still having issues with my textures being blurred on Locomotives. Is there a way to fix this? Thank you!
 
Back
Top