Problem with BI3 Industry Track - AI Trains not Loading

[TDN-Trainz]

Hi. I am having a problem with the BI3 Industry Track. Following MSGSapper's tutorial on modifying it, I created a track for loading wood pellets (<kuid2:473136:102309:1>). I place speed limits on the entry (6 kph) and duly set up the receiving hopper cars to receive wood pellets. I have set the track to initiate with 10,000,000 of product and a process to produce 1,000 tonnes of pellets. When manually driving a train through the track the wagons load without any problem (speed at 5 kph). However, when an ai train drives over the track (using Drive via Trackmark or Navigate via) nothing happens. The ai train drives at the appropriate speed (varies from 3 to 5 kph).

Can anyone suggest a solution?

Denis

 

[TDN-Trainz]

BTW I am using Build 132317 on a Mac, if that makes a difference.

 

[stagecoach]

AI needs the drive to industry and load commands. It won't load/unload just by driving slowly past.

 

[TDN-Trainz]

The BI3 Industry tracks are supposed to load/unload without those commands: See MSGSapper's tutorial on Understanding BI3 Industry Tracks -"This track will load and/or unload a variety of rail cars when either stopped or moving over the track at 5MPH/8KPH or less. Rail cars that are configured for the chosen product will load or unload at the single short red and white striped marker pole, which indicates where the load or unload point is located."

I have tested the same set up with the cars stopping on the track & AI trains load as predicted. It is only when they are moving that they don't.

 

[JimDep]

The BI3 Industry tracks are supposed to load/unload without those commands: See MSGSapper's tutorial on Understanding BI3 Industry Tracks -"This track will load and/or unload a variety of rail cars when either stopped or moving over the track at 5MPH/8KPH or less. Rail cars that are configured for the chosen product will load or unload at the single short red and white striped marker pole, which indicates where the load or unload point is located."

I have tested the same set up with the cars stopping on the track & AI trains load as predicted. It is only when they are moving that they don't.

I've never known the AI B13 type industry tracks to work without those rule commands.
Please post back when you've made progress with this. Good luck.