Cars moving out of lane?

Hi guys, so I have built a 2-lane dual carriageway starting with speeds from 30mph up to 60mph using uk invisible roads. Can anyone tell me why sometimes the cars move to the right which means that the cars in the fast lane cross the barrier?

Or do you have a better alternative?

Regards

Harry
 
Thank you, what's the solution then? as all uk road are rubbish?

Regards

Harry

The solution would be to use these invisible roads with no traffic roads to keep them from duplicating carz from spawning
There is a readme on how to use them. There are on the DLS many different ones with different speed limits that work.
Look for Jons Oneway Invisible, and you will see all of them that I had done several of them for custom Traffic realism there are also the two way ones that I made for 2 lane roads. READ the readme on how to use them.
here are a view of the kuids below.:)

<kuid2:95230:101649:2> Jons Oneway Invisible 1L np Road 65mph NT
<kuid2:95230:101561:1> Jons Oneway invisible 3L PS Generator TR,45mph
<kuid2:95230:101553:1> Jons Oneway invisible 2L PS Generator TR,35mph PS means allowed passing.
np= no passing to stop the from passing into the barriers
<kuid2:95230:101649:2> Jons Oneway Invisible 1L np Road 65mph NT nt=no traffic butt the carz will use them.
Cheers.
 
The solution would be to use these invisible roads with no traffic roads to keep them from duplicating carz from spawning
There is a readme on how to use them. There are on the DLS many different ones with different speed limits that work.
Look for Jons Oneway Invisible, and you will see all of them that I had done several of them for custom Traffic realism there are also the two way ones that I made for 2 lane roads. READ the readme on how to use them.
here are a view of the kuids below.:)

<kuid2:95230:101649:2> Jons Oneway Invisible 1L np Road 65mph NT
<kuid2:95230:101561:1> Jons Oneway invisible 3L PS Generator TR,45mph
<kuid2:95230:101553:1> Jons Oneway invisible 2L PS Generator TR,35mph PS means allowed passing.
np= no passing to stop the from passing into the barriers
<kuid2:95230:101649:2> Jons Oneway Invisible 1L np Road 65mph NT nt=no traffic butt the carz will use them.
Cheers.

Hi and thank you guys for your ongoing support. So, I have downloaded the Jons roads and have I quick question, I laid down <kuid2:95230:101665:1> Jons Oneway Invisible 2L Pass Road 45mph NT Which I presume is 2 lane one-way traffic and I have linked <kuid:95230:103546> Jons Oneway invisible 2L Generator PS TR,15mph to the invisible road but only get one lane of traffic?

So, what I'm I doing wrong?

Regards

Harry
 
I think that is correct that only one lane spawns the Traffic.
May need to put another one at the other end.
Or maybe you need the Traffic 2L Generator for a 2 lane two way road, to get both lanes going. I will test it myself and see what it does and get back to you.
You can also pm me and I can help you from there.

Make sure that you draw the invisible road in the opposite direction of the traffic flow, draw it toward you.
read the readme ne and that should explain more
 
Hi Jeff, thank you for your post. What is the kuid code for Traffic 2L Generator? as I can't find it. Let us know how your test goes?

Regards

Harry
 
Hi guys, yes, you are right. Also, the Jon invisible roads are just the same. They all do it at speed so it's down to a creative design to hide the problem.

In the end I found the UK invisible roads to be the best, ie lest cars jumping lane.

Have a good weekend.

Regards

Harry
 
I will find those kuids for the Spawners by Monday, been busy for the last 2 days and not on my Trainz.
Will check for them soone and post them here.
 
Back
Top