Trainz Plus 116912 ready for testing
- Thread starter Tony_Hilliam
- Start date
Tony_Hilliam
Trainz Plus - enjoy Trainz from just 20 cents a da
Which membership do you have?
Download and update took a bit longer than usual, done on a full install
Trainz content store
-and no betatest:1029
*-Installed Payware now shown in Green to differentiate between installed and not installed payware.
that is a good update
*-Trying out a new minimal compass
excellent no nonsense compass, great job !
*-Update a range of game sounds
less honking tytyty !
*-Mouse input is considerably more precise at low speeds (improves rotating objects)
In surveyor good, but in Driver still too coarse and jumpy, like I move 1cm and screen is turned 90 degrees
*-Fix redraw that caused missing assets from screenshots
Thanks for the screenshot fix
but a user does not make bugs....
testing continues, greetings GM
Trainz content store
-there is no search possible here in that content store
-and no betatest:1029
*-Installed Payware now shown in Green to differentiate between installed and not installed payware.
that is a good update
*-Trying out a new minimal compass
excellent no nonsense compass, great job !
*-Update a range of game sounds
less honking tytyty !
*-Mouse input is considerably more precise at low speeds (improves rotating objects)
In surveyor good, but in Driver still too coarse and jumpy, like I move 1cm and screen is turned 90 degrees
*-Fix redraw that caused missing assets from screenshots
Thanks for the screenshot fix
ofc, you guys do and its appreciated
but a user does not make bugs....
testing continues, greetings GM
Now Getting Severe Surveyor Stutters When Un-Paused.
Hello Team.
Now getting SEVERE Surveyor stutters when un-paused, less then 3fps
but when I pause the Game it is back to normal and smooth fps.
This is with the New Build Patch 116912.
When in driver still stutters but not as poor as when in un paused Surveyor.
Any ideas what happened to the install?
Thanks.
jjeff1955
Hello Team.
Now getting SEVERE Surveyor stutters when un-paused, less then 3fps
but when I pause the Game it is back to normal and smooth fps.
This is with the New Build Patch 116912.
When in driver still stutters but not as poor as when in un paused Surveyor.
Any ideas what happened to the install?
Thanks.
jjeff1955
Tony_Hilliam
Trainz Plus - enjoy Trainz from just 20 cents a da
Widen the window to show the search option.
we will need to check the configuration tomorrow but meanwhile make sure you are in the purchased tab not the store tab.
jjeff - check AV and other 3rd party apps. Settings. Any other differences. No one else has reported this issue as yet.
we will need to check the configuration tomorrow but meanwhile make sure you are in the purchased tab not the store tab.
jjeff - check AV and other 3rd party apps. Settings. Any other differences. No one else has reported this issue as yet.
Last edited:
Hello Tony Cheers to you!
Trainz 2022 build 116912
I did not change anything in my PC to cause this new issue, I only updated the 2022 when prompted.
I am running at full screen same as before at a locked 60 fps-1920x1080, check all setting in the performance tabs and they are matched as before.
Trains 2019 does not have this new fps issue.
When in Surveyor all is good until I un-pause and then the stutters starts, and they are hard type stop, and go stutters, also happening in Driver mode not as Severe but still stutters, and hard to watch
the animations stutter ever few seconds or so.
This is a new issue that has happened after this latest Update.
Nothing running in my PC Windows background.
Thanks for looking in to this.
As always you guys are Awesome at patching when a new issue happens.
Cheers!
Trainz 2022 build 116912
I did not change anything in my PC to cause this new issue, I only updated the 2022 when prompted.
I am running at full screen same as before at a locked 60 fps-1920x1080, check all setting in the performance tabs and they are matched as before.
Trains 2019 does not have this new fps issue.
When in Surveyor all is good until I un-pause and then the stutters starts, and they are hard type stop, and go stutters, also happening in Driver mode not as Severe but still stutters, and hard to watch
the animations stutter ever few seconds or so.
This is a new issue that has happened after this latest Update.
Nothing running in my PC Windows background.
Thanks for looking in to this.
As always you guys are Awesome at patching when a new issue happens.
Cheers!
No, it still installs as "TANE".
Everything installed without error. I see a couple of issues that are hold overs from the last version. I have a session for Kickstarter County 2 which I tried on the TRS22 new version. This version has much more contrast in lighting than the last release of KS2. And there appears to be something funny with the wye. Here is what happens, I have a loaded coal train leaving the Daydream Mine sidings bound for the Power Plant coal drop off. The icon created by the Navigate to.. widget shows in the list of driver commands for the train. The trains proceeds as expected until if get to the wye where the icon changes to a red circle with a big X across it. The train continues to the power plant as expected so the change is just to the icon. The second issue is when the train reaches a crossover set of switches, the train will change the first switch to take the crossover but not the other switch to allow the crossover to happen. You must manually flip the second switch to take the crossover to the other mainline track.
Everything is either builtin or packaged. Loco is NS SD-40-2 2a1 from the trainz store and the hoppers are NW100 Ton Hopper 1 which are packaged with the Lone Pine Branch DLC.
Everything is either builtin or packaged. Loco is NS SD-40-2 2a1 from the trainz store and the hoppers are NW100 Ton Hopper 1 which are packaged with the Lone Pine Branch DLC.
Last edited:
Hello again. I am back to try an explain what I found.
Strange thing is that my Huge Custom Map does not have these Stutter issues that I just reported.
It seems to be still smooth as it was before the update, but when I am in my small test Map it has the severe stop, and go stutters when un paused. I also deleted all other assets on my Test map to do further Testing, the hard Stutter is still there when un paused. I Created a new Test Map with only a few Tiles still the same issue.
I would report this to the Support Team but very difficult to explain and show them.
I will just wait for a few days to see what others report, and see if others have this issue?
My PC is Clean and nothing causing Latency issues. GTX 1080ti FTW3. no Heat issues.
I just checked with the Portable Latency Software tools, and all is smooth, and green no hard Hardware hits are showing in the Graph.
I am not angry at all, and I will never get upset or Salty about these issues as I am a Beta Tester for your Community and Dev Team.
I can just be patient and see what happens.
Cheers.
Strange thing is that my Huge Custom Map does not have these Stutter issues that I just reported.
It seems to be still smooth as it was before the update, but when I am in my small test Map it has the severe stop, and go stutters when un paused. I also deleted all other assets on my Test map to do further Testing, the hard Stutter is still there when un paused. I Created a new Test Map with only a few Tiles still the same issue.
I would report this to the Support Team but very difficult to explain and show them.
I will just wait for a few days to see what others report, and see if others have this issue?
My PC is Clean and nothing causing Latency issues. GTX 1080ti FTW3. no Heat issues.
I just checked with the Portable Latency Software tools, and all is smooth, and green no hard Hardware hits are showing in the Graph.
I am not angry at all, and I will never get upset or Salty about these issues as I am a Beta Tester for your Community and Dev Team.
I can just be patient and see what happens.
Cheers.
Searching "betatest:1029" or anything like "1029", "beta", etc., returns no result.
I'm also observing stutters on my custom map in one particular location (the biggest station on the route), but only when I try to rotate the camera. If I stop moving it, the animations seem to go back to normal. The same scenery works smoothly in TRS2019. GTX 1060.
update 116492 > 116912 : checking + downloading + installing + dbr = 12 minutes ..
launcher / start trainz : a minute blanc mainmenu .. then appearing fully (without screen construction ..)
main menu / driver/surveyor (2.0) / route / edit route : one board < 1 min .. also a directly appearance .. 1st impression tools : ok .. exit surveyor = no shortcut ..
driver/surveyor (2.0) / route / edit route : 1 board merge 1 board = 3 secs = ok .. compass = compact + disappear quick .. (merging is not reversable) .. merge 1 board + multi boards = ok (in secs) ..
driver/surveyor (2.0) / route : orange route (west from denver) / download : .. trainz content / updates .. 12 mins = ok .. (<kuid2:57230:100258:7> --> ...:11) ..
launcher / content store (= "trainz content") / updates previewpass:822 = ok ..
launcher / content store (= "trainz content") / purchased / search : preview(pass):1029 = no ..
launcher / content store (= "trainz content") / updates : auto (= initial exclamation marks disappear ..)
auran.com / my trainz / membership / manage content vault / choose items : no "schwäninger land" (yet) ..
windows / settings / apps : no trainz install of today ..
launcher / main menu / driver/surveyor / route / edit route / crtl+F2 / drive : animations no stutter ..
.. thankz for the update .. will do more fun ..
grtz with respect ..
launcher / start trainz : a minute blanc mainmenu .. then appearing fully (without screen construction ..)
main menu / driver/surveyor (2.0) / route / edit route : one board < 1 min .. also a directly appearance .. 1st impression tools : ok .. exit surveyor = no shortcut ..
driver/surveyor (2.0) / route / edit route : 1 board merge 1 board = 3 secs = ok .. compass = compact + disappear quick .. (merging is not reversable) .. merge 1 board + multi boards = ok (in secs) ..
driver/surveyor (2.0) / route : orange route (west from denver) / download : .. trainz content / updates .. 12 mins = ok .. (<kuid2:57230:100258:7> --> ...:11) ..
launcher / content store (= "trainz content") / updates previewpass:822 = ok ..
launcher / content store (= "trainz content") / purchased / search : preview(pass):1029 = no ..
launcher / content store (= "trainz content") / updates : auto (= initial exclamation marks disappear ..)
auran.com / my trainz / membership / manage content vault / choose items : no "schwäninger land" (yet) ..
windows / settings / apps : no trainz install of today ..
launcher / main menu / driver/surveyor / route / edit route / crtl+F2 / drive : animations no stutter ..
.. thankz for the update .. will do more fun ..
grtz with respect ..
I am working on it, and avoiding pulling out my Nose Hairs!
I have also found that the Surveyor Menu Bar when sliding thru the available Maps stutters hard also.
Acts like 2 versions of Trainz running at the same time, but nothing listed running in my task manager.
2019 is very smooth when scrolling across back, and forth thru the Maps.
I am downloading the 2022 Plus full offline installer and it is the Build: 116492 and try to update it again to the latest build
I will uninstall all of the Listed TANEs that are in my uninstall options, there are 5 of them, that may be the issue.
2019 is listed also listed, but it is named 2019 in my uninstall.
I have backed up my local data folders to protect them.
I will get back here later to let this thread know if it is solved or not.
Cheers.
I have also found that the Surveyor Menu Bar when sliding thru the available Maps stutters hard also.
Acts like 2 versions of Trainz running at the same time, but nothing listed running in my task manager.
2019 is very smooth when scrolling across back, and forth thru the Maps.
I am downloading the 2022 Plus full offline installer and it is the Build: 116492 and try to update it again to the latest build
I will uninstall all of the Listed TANEs that are in my uninstall options, there are 5 of them, that may be the issue.
2019 is listed also listed, but it is named 2019 in my uninstall.
I have backed up my local data folders to protect them.
I will get back here later to let this thread know if it is solved or not.
Cheers.
Last edited:
Not sure I like it when its 5.1, cause now routes saved in trs22 do not work in TRS19sp5 ?
the buildnumber should only change when the route format really changes.
Saw nothing in the OP that points to that.
The Selection color seems more transparent (less green), this helps when trains have texture replacement
a good improvement TY !
the buildnumber should only change when the route format really changes.
Saw nothing in the OP that points to that.
The Selection color seems more transparent (less green), this helps when trains have texture replacement
a good improvement TY !
Similar threads
