South Australian railway content
- Thread starter dangavel
- Start date
Uploaded to DLS over the weekend
SAR Pillbox
<KUID:216380:103485>
File Size: 2.92 MB
SAR Stone Station - Midnorth and Flinders First Class Texture Group
<KUID:216380:103458>
File Size: 12.16 MB
SAR Stone Station - Midnorth and Flinders Lines First Class Station
<KUID:216380:103449>
File Size: 11.08 MB
Pillbox supports 6 different doors skins and 3 renders. Controllable via Properties
Station requires BOTH assets and represents 11 stations (Orroroo, Laura, Peterborough, Yongala, Hawker, Crystal Brook, etc) with 2 variants for Peterborough (unclear if the one listed as Later years is accurate or not). This also has about 5-6 unnamed versions which can be used generically.
I may re-release this one at a later point and redo some parts that I would like to improve on
Next up from me is to revisit and finish Silos. Planned for release will be a modular silos (can select skin, shed style, shed placement, elevator placement, loading cell height, rail loading equipment) and will cover the following styles:
1x2
2x2
2x3
2x2+2x2
2x2+2x3
2x3+2x3
2x4
2x5
2x6
2x8
Following this I have a long line of other things including more stations and some other things
SAR Pillbox
<KUID:216380:103485>
File Size: 2.92 MB
SAR Stone Station - Midnorth and Flinders First Class Texture Group
<KUID:216380:103458>
File Size: 12.16 MB
SAR Stone Station - Midnorth and Flinders Lines First Class Station
<KUID:216380:103449>
File Size: 11.08 MB
Pillbox supports 6 different doors skins and 3 renders. Controllable via Properties
Station requires BOTH assets and represents 11 stations (Orroroo, Laura, Peterborough, Yongala, Hawker, Crystal Brook, etc) with 2 variants for Peterborough (unclear if the one listed as Later years is accurate or not). This also has about 5-6 unnamed versions which can be used generically.
I may re-release this one at a later point and redo some parts that I would like to improve on
Next up from me is to revisit and finish Silos. Planned for release will be a modular silos (can select skin, shed style, shed placement, elevator placement, loading cell height, rail loading equipment) and will cover the following styles:
1x2
2x2
2x3
2x2+2x2
2x2+2x3
2x3+2x3
2x4
2x5
2x6
2x8
Following this I have a long line of other things including more stations and some other things
Dinorius_Redundicus
kuid 68213
Nick,
Cripes, you are really churning through these assets. I wish I had your energy.
Regarding the pillboxes, it looks like they could use a higher degree of smoothing on the conical tops (unless the hard rectangles on the rims are intentional).
~ D
Cripes, you are really churning through these assets. I wish I had your energy.
Regarding the pillboxes, it looks like they could use a higher degree of smoothing on the conical tops (unless the hard rectangles on the rims are intentional).
~ D
Had a look and I have Sharp Edges enabled where they should not. Have fixed and will reupload in a day or two
Yeah been trying to churn out a few things for a number of projects. There is quite a bit of content for NSW, Vic, Queensland and not enough for my state
Which is a major reason Ive ceased doing anything on the Willunga route for a while, virtually nos signals exist that i can use for the major yards, if I did use existing signals and then someone makes a set, its a big job to change it all,hopefully more content will emerge within a year , if not, well we'll see. Meanwhile the section between Brighton and Willunga doesn't need much new content, so if the signals never get done, i'll just complete that section. Meanwhile,I'm busy with US routes that will take about 6 months to complete and then we will see where things go..
You can add Tasmania to that list (of not enough) as well
Also add WA and NT then too
Islington_Brick
Islington
Been working around Balhannah for the Mount Pleasant Line
Typical South Australian Concrete Vertical Silos in 1x2 arrangment, I've pulled as much as I can from different configurations into this. The asset is modular and can be configured via surveyor properties to select from
1. One of six different concrete skins. Three raw concrete depicting age and three painted concrete
2. Selection of two different receival sheds
3. Selection of central loading cell openings and associated railside loading chute
4. Selection of secondary loader equipment for either left, right or both sides of the central loader and allows selection of style
5. Visibility of low level access platform
6. Visible branding on silos allowing selection of no branding, SACBH, AUSBULK, ABB Grain or Viterra and selection allows position of branding on either left or right corners
Following this one will work through the 2x2, 2x3, 2x4, 2x5, 2x6 and 2x8 configurations. There are some specialist designed ones that I wasn't looking to cover just yet including the silos at Thevenard, Ardrossan, Port Giles, Port Adelaide, Port Lincoln. The second lot of these I will be looking to cover is the 2x2+2x2, 2x2+2x1+2x1 (need to reconfirm but this should be Stockwell), 2x2+2x3, 2x2+2x2+2x3, 2x3+2x1, 2x3+2x3, 2x5+2x2
Still need to fix a few items but will have a first release for beta testing by the end of the week
1. One of six different concrete skins. Three raw concrete depicting age and three painted concrete
2. Selection of two different receival sheds
3. Selection of central loading cell openings and associated railside loading chute
4. Selection of secondary loader equipment for either left, right or both sides of the central loader and allows selection of style
5. Visibility of low level access platform
6. Visible branding on silos allowing selection of no branding, SACBH, AUSBULK, ABB Grain or Viterra and selection allows position of branding on either left or right corners
Following this one will work through the 2x2, 2x3, 2x4, 2x5, 2x6 and 2x8 configurations. There are some specialist designed ones that I wasn't looking to cover just yet including the silos at Thevenard, Ardrossan, Port Giles, Port Adelaide, Port Lincoln. The second lot of these I will be looking to cover is the 2x2+2x2, 2x2+2x1+2x1 (need to reconfirm but this should be Stockwell), 2x2+2x3, 2x2+2x2+2x3, 2x3+2x1, 2x3+2x3, 2x5+2x2
Still need to fix a few items but will have a first release for beta testing by the end of the week
These look excellent! Keep up the great workTypical South Australian Concrete Vertical Silos in 1x2 arrangment, I've pulled as much as I can from different configurations into this. The asset is modular and can be configured via surveyor properties to select from
1. One of six different concrete skins. Three raw concrete depicting age and three painted concrete
2. Selection of two different receival sheds
3. Selection of central loading cell openings and associated railside loading chute
4. Selection of secondary loader equipment for either left, right or both sides of the central loader and allows selection of style
5. Visibility of low level access platform
6. Visible branding on silos allowing selection of no branding, SACBH, AUSBULK, ABB Grain or Viterra and selection allows position of branding on either left or right corners
Following this one will work through the 2x2, 2x3, 2x4, 2x5, 2x6 and 2x8 configurations. There are some specialist designed ones that I wasn't looking to cover just yet including the silos at Thevenard, Ardrossan, Port Giles, Port Adelaide, Port Lincoln. The second lot of these I will be looking to cover is the 2x2+2x2, 2x2+2x1+2x1 (need to reconfirm but this should be Stockwell), 2x2+2x3, 2x2+2x2+2x3, 2x3+2x1, 2x3+2x3, 2x5+2x2
Still need to fix a few items but will have a first release for beta testing by the end of the week
The family is growing
Supports 6 concrete skins, elevator/sehd side selection, 3 receival sheds, high, medium and low loading cell selection as well as secondary loading selection options plus branding
Still pending some work on myside so anyone who is assisting with testing that I promised for this weekend may see a few day delay
EIDT: After posting noticed a spelling error which will be fixed now
Supports 6 concrete skins, elevator/sehd side selection, 3 receival sheds, high, medium and low loading cell selection as well as secondary loading selection options plus branding
Still pending some work on myside so anyone who is assisting with testing that I promised for this weekend may see a few day delay
EIDT: After posting noticed a spelling error which will be fixed now