Missing James The Red Engine Dependency

[alucardvamp]

I've downloaded all the Thomas The Tank Engine And Friends Locos and dependencies from their site at http://www.sodorisland3dmodels.zoomshare.com/0.html (very good, but with a few bugs).

The main problem is i can't find the asset kuid:93502:51022. I have no idea what it is but know that James can't be added to a track without it. It wasn't included in the downloaded asset files and it's not in the Trainz download section.

If anyone knows what it is and where to download it, please tell.

 

[rweber95]

His 51xxx series of kuids are enginespecs. If you can't find 93502:51022 you could use one of these:

Mini engspec config,<kuid:93502:51004>
Mini engspec config,<kuid:93502:51005>
A10 engine 0-4-2S config,<kuid:93502:51023>
3F6I A10 engine 0-4-2S config,<kuid:93502:51024>

which are on the DLS.

Bob

 

[Dean_Forest]

What version of trainz are you using?

If 06 or TC3, you could use the 4f spec

There are probably more on the DLS

I wouldn't recommend using the MSTNoodle specs listed above as they are for much smaller engines

 

[fergusandtoadfan]

James works well for me, ironicly right now he's the only engine that works :hehe:




Now heres the engine himself for those you don't know what it looks like
http://trainz.banal.net/catalog/pages/medium/Fic/Fic_Thomas_James_5_268447_1329.html

 

[mikeaust]

93502:51022 is the config.txt file for James.
Pm your email and I will send it to you

Cheers,
Mike

 

[randy]

how to you change the kuid file so that it searches for a different kuid than
the 93502 51022 ???

 

[rweber95]

Randy,
It depends on which version of Trainz you're using. Post it and we'll help you.

Bob

 

[randy]

ive got the 2006 version

 

[rweber95]

I personally prefer to use windows explorer and notepad instead of opening the CCP editor in CMP because is changes the whole asset to version 2.9 (TS2009) which is not always desireable.
Using CMP, find your loco's kuid, right click and select Edit - Edit in Explorer which opens a new window with a list of the files in that kuid. Double click the config.txt file to open it in Notepad. Find the tag:

enginespec "<kuid:xxxxx:yyyyy>"

and change the kuid number to the one you want to use. Then save the config.txt and in CMP select the loco kuid and commit it.

Bob

 

[richdownes89]

93502:51022 is the config.txt file for James.
Pm your email and I will send it to you

Cheers,
Mike

could you please send me it please?
It would be appreciated if you could.

kuid104722:53870
would also be beneficial if possible?

 

[pokemon123]

guys i got james

it will work and the faces will change and its ubkl and give me a while before i give anyone ubkl thomas trains

 

[tommylee3010]

Found the missing link to James...

Hey,
I don't now if you fixed James yet. But I also downloaded him from the same site and did not get him to work. here the thing, i could not get him to work after like 2 downloads so i look harder. so right after James's download section their was a missing dependencys tab for james. just go to http://si3d.jimdo.com/

 

[daisy05]

Hey,
I don't now if you fixed James yet. But I also downloaded him from the same site and did not get him to work. here the thing, i could not get him to work after like 2 downloads so i look harder. so right after James's download section their was a missing dependencys tab for james. just go to http://si3d.jimdo.com/

ok everybody step by step what do i need to do to get james from si3d working and alson how do i get locos like murdoch, mavis for trs2006 thanks please pm me

 

[Jaymom]

richdowness89....104722:53870 is on the DLS. Check the UTC box.

Harold

 

[rweber95]

ok everybody step by step what do i need to do to get james from si3d working and alson how do i get locos like murdoch, mavis for trs2006 thanks please pm me

Downloaded Jamesnew.cdp from http://www.mediafire.com/?lk120mg3unj
and James engine 2-6-0 config.cdp from http://www.mediafire.com/?zizrnggj5ni
Used CMP File - Import CDP to install them into TRS2006.
CMP only shows one error in James's Tender,<kuid:268447:6004>:
Error: Attachment point animated-mesh (load) in 'queues\load-coal' was not found.
Righ click on James's Tender and select Edit - Edit in Explorer. Double click on the config.txt file. Delete the section:
queues
{
load-coal
{
size 5000
initial-count 5000
animated-mesh "load"
product-kuid <kuid:44179:60013>
}
}
Save and commit. This is the result.

Bob

 

[rweber95]

93502:51022 is in James engine 2-6-0 config.cdp from http://www.mediafire.com/?zizrnggj5ni

Bob

 

[daisy05]

Downloaded Jamesnew.cdp from http://www.mediafire.com/?lk120mg3unj
and James engine 2-6-0 config.cdp from http://www.mediafire.com/?zizrnggj5ni
Used CMP File - Import CDP to install them into TRS2006.
CMP only shows one error in James's Tender,<kuid:268447:6004>:
Error: Attachment point animated-mesh (load) in 'queues\load-coal' was not found.
Righ click on James's Tender and select Edit - Edit in Explorer. Double click on the config.txt file. Delete the section:
queues
{
load-coal
{
size 5000
initial-count 5000
animated-mesh "load"
product-kuid <kuid:44179:60013>
}
}
Save and commit. This is the result.

Bob

ok thanks i'll try that

 

[arose1228]

Downloaded Jamesnew.cdp from http://www.mediafire.com/?lk120mg3unj
and James engine 2-6-0 config.cdp from http://www.mediafire.com/?zizrnggj5ni
Used CMP File - Import CDP to install them into TRS2006.
CMP only shows one error in James's Tender,<kuid:268447:6004>:
Error: Attachment point animated-mesh (load) in 'queues\load-coal' was not found.
Righ click on James's Tender and select Edit - Edit in Explorer. Double click on the config.txt file. Delete the section:
queues
{
load-coal
{
size 5000
initial-count 5000
animated-mesh "load"
product-kuid <kuid:44179:60013>
}
}
Save and commit. This is the result.

Bob

I get this warning after doing that. " Warning: This asset requires a shadow mesh, but the mesh table does not contain one. " Any suggestions.

 

[rweber95]

That message is a warning, not an error, as noted by the yellow triangle. Errors are red circles with an X in the middle. Just disregard it.
If you want to add a shadow, you could download PEV's Quick Shadows program from http://www.members.optusnet.com.au/~villaump/pevsoft.htm.

Bob

 

[thomasfreak5]

ok everybody step by step what do i need to do to get james from si3d working and alson how do i get locos like murdoch, mavis for trs2006 thanks please pm me

how did yall get these engines to work with the content manager? mine wont work