Australian screenshots

[Red_Rattler]

About the Sydney Harbour Bridge

And here is one of the two former tram tunnels to the Wynyard Underground Tram platforms. This one looks to be the DOWN tunnel exit (ie, From Wynyard):

** NO QUOTING OF PICTURE PERMITTED **

(Edit: Opps, it leads to the wrong picture & I'm unable to fix it at the moment)

 

[steve123]

Steve123,
great harbour bridge. thank you but just missing kuid2:208722:50061:1.

cheers
greg

I believe that kuid is from an older version of the Harbour bridge that i have made in the past, i have ran a complete search for it on all my computers time after time looking for it and each time there is no success.
So at this point in time i am sure it is a part of the bridge that has received and new kuid number.

Thanks boozer

Great shots Dave
Regards steve123

 

[Red_Rattler]

Thanks for that Steve

There are two files in the Sendspace site using the word T.ANE & Tane.

Are they only for the TANE version? Having said that, I have had before TS12 work in TS10, but not work in TS12!

I believe that kuid is from an older version of the Harbour bridge that i have made in the past, i have ran a complete search for it on all my computers time after time looking for it and each time there is no success.

I believe I MAY (not have) found an older version of the harbour bridge on an older version of the game.

 

[steve123]

Here is that kuid2:208722:50061:1. it was much easier to make a new asset using the same kuid number so it is Sydney Harbour Bridge Australian Flag
The files on sendspace now are only for T.ANE, the harbour bridge works way better in T.ANE

https://www.sendspace.com/file/4g3xm4

I do have somewhere a Trainz 2009 Empire builder version of the Sydney Harbour Bridge if you or anybody else needs it.
Regards steve123

 

[NSWGR_46Class]

I have been sitting on this for quite a while and not done a lot with it but have decided to now make it public domain as its a bit pointless for me to sit on it and horde it when someone else in the trainz community may make use of it. PS I have used a bit of it in one of my trams route - Central to Watsons Bay line that may see the light of day some time since I made all the trams for the route LOL.

So here it is the Sydney and surround suburbs dem data
https://www.sendspace.com/file/wf5u40 download is time limited 7 days I think

I have some other dem routes I may also release soon as well

 

[NSWGR_46Class]

Blayney to Cowra DEM file and maps etc
https://www.sendspace.com/file/0ux5de

 

[NSWGR_46Class]

Dem files for the Rockdale Trolley Bus route also suitably for the steam Rockdale steam trams route - since that is what the trolley buses replaced or you could do a route with both as they ran together on the day of the change over form tram to trolley buses .
https://www.sendspace.com/file/l9zokv

If you going to email or PM and asked me how to use the files you should not be downloaded them in the first place OK

 

[lesley]

T324 with a small rake of GY's hauling grain departs Lambley Rail...

 

[NSWGR_46Class]

Great shot - where did you get that great staff exchange stand from ? may I ask Please

 

[S301]

Great shot Tom! Funny enough, I was embarking on a similar mod to Wadalbavale a month or so back lol.

NSWGR_46class, it'll be 'KUID2:1854:30610:2', there's also a plain (grey) timber one 'KUID2:1854:30611:2'

Regards
Zec

 

[matruck]

I was embarking on a similar mod to Wadalbavale a month or so back lol.

Pictures or it didn't happen Zec, Ya cant say you embarked on a project without showing progress piccy's.
Cheers Mick.

 

[Azervich]

I lost all the VR Mods I did to Wadabavale, TS2009/TS10, I never carried it over to TS12

Screenshot is from Oct 2010

Cheers.

 

[NSWGR_46Class]

Fresh out of the paint shop some new kids on the block get their photos snapped

 

[Red_Rattler]

ATTN: Steve123

Steve123, it seems that your Sydney Harbour Bridge is only for T.ANE.

 

[steve123]

Give me a few hours to reinstall Trainz 2010 and then install the Sydney Harbour Bridge Route, it won't be ready until later today as i have a few orders i have to deliver today.
To save me alot of stuffing around what version of Trainz are you using.
steve

 

[steve123]

This link is for Trainz 2010 and TS12 Version of the Sydney Harbour Bridge only as it is not as detailed the better T.ANE version you will need to make some adjustments to it, there are no Layers used with it and you will also need all of Davidos Catenary, Gantry, Posts, { Gantry + wire Splines.}
File 1 are the bridge assets
File 2 is the Sydney Harbour Bridge 2010 Route . This version has a build number of 2.9

https://www.sendspace.com/filegroup/G4M1yVH7r2C7cFJPxHW2GA

Regards steve123

 

[NSWGR_46Class]

Done a bit of super detailing today

 

[trainfan2017]

4BWT loaded Ballast train stops briefly at Bomolo to get a train order to continue on wards towards Muji to distribute ballast.


Cheers
David

 

[trainz89]

CR Central Australia Line (Old Ghan)

Hello All,

Some W.I.P Progress shots of reworking the Old Ghan myself and Rastis started; with extra additions and custom content.

Alberrie Creek

A final shot of a Commonwealth Railways NM class; wandering lonely across the flats of Central Australia with the Oodnadatta Mixed.

With Regards,

M.Gitsham

 

[lachy10]

Trainz89,

If you release the Silverton Tramway & WAGR W class would you be able to put it on Trainz 2009, 2010 or 2012.
At the moment I am just dreaming of driving them! :hehe:
By the way, those pictures look awesome. I hope the route goes well!

Thanks,

Lachy