Australian screenshots

Hey all,

Yes, it is a H class, and I didn't really think of it as pre-war
I started making if for my Geelong Route as I'm making it 1880s-1900s
The Old 'R' class is actually a 0-6-0 with a 6 wheel tender
The Y class is also a 0-6-0 with a 6 wheel tender
John_SB has the rebuilt "larger 175 psi boiler" Y class on DLS.
I have also started some work on the "original Y class 140 psi smaller boiler"

Here is another shot of the H after several hours of work on it today,
most of it spent mapping it out "as it needs to be on 1 texture for TS09+" :(

AmarrBattlecruiser.jpg


I'm trying to get it close to the "as built" version without all the added mods years later.
I'm also going to rebuild the wheels and rods as they don't seem right "I'm not good at wheels" lol'ed.

-Aaron
 
How is a Cityrail S-Set configured?? I just spent the last 20 minutes looking and this is a last resort

Jamie
 
How is a Cityrail S-Set configured?? I just spent the last 20 minutes looking and this is a last resort

Jamie

Jamie, if you mean the carriage/set numbers, open the properties menu, and they are controlled through the running number.

If you mean passengers, then you have to add the relevant lines to the config file first, to add that capability.

Matt.
 
Matt, I actually meant
Trailer-Motor-Trailer-Controller Setup

As in the way the physical train, the way City-rail runs it

Jamie
 
Matt, I actually meant
Trailer-Motor-Trailer-Controller Setup

As in the way the physical train, the way City-rail runs it

Jamie

Whoops, my mistake. I'll crawl back under my rock now:o

I believe, though, this has been answered before. Never mind, someone smarter than me will be along to assist shortly.

Matt.
 
Quote:
Originally Posted by 3830
Ronayne,thanks. The route is a WIP of mine, and that loco is an AN, found on the dls by Vinnybarb. It's a great model!

Thankyou. I'll download them when the dls is working again. :)

You will find the different AN Classes under TRS04, uploaded in Aug 2010, to beat the upload time limit for TRS04 creations. Although these were made for TS09/10 but with a version 2.4 number where these work as well without errors in native mode. I still have to upload dedicated TS09/10 models of these, I have not gotten around yet to make the configurations for these.

Btw, the DLS is working, despite others reporting it as not working. Try d/loading via FTP, works every time for me.

Cheers and have fun.

VinnyBarb
 
Sorry, I came in late but where does your Southport line start; South Brisbane or Ernest Junction?

Thanks
Peter C
These following routes are going to make DLS
QGR Southport Branch V1

and many more to list, and some others are going to be on DLS next week,
Regards Michael
 
Matt, I actually meant
Trailer-Motor-Trailer-Controller Setup

As in the way the physical train, the way City-rail runs it

Jamie

Jamie,

S sets are configured with a motor car and a trailer car paired togther in either 4, 6 or 8 car sets (and the occasional 2 car set). The motor cars always start with C then a number beginning with 3 then a second digit which is either 7 or 8 if they are ComEng cars or 0 or 1 if they're Goninan cars. Trailer cars always begin with T then a number beginning with 4 then 1 for Goninan trailers or 7 or 8 for ComEng trailers.

K and C sets are slightly different in numbering as are all other sets.

Railwayz
 
Just to make it a bit more clearer, in addition to the above...

2 Car (M+D)
4 Car (M+T+T+M)
6 Car 1 (M+T+M+M+T+M)
6 Car 2 (M+T+T+M+D+M)
8 Car (M+T+T+M+M+T+T+M)

I've noticed most of the 2 car sets run between Gosford and Newcastle (Coded K1, 2 etc.)

Tom :)
 
locos

the following rollingstock is not work in my trainz 2010 cmp is 3.2
DH
1600
1620
Dreadman 1720s,2000 class
EMUs
BAZY (NG)
BAOY
1460/1502 by Pikka

If anyone can help me thos would be very great i have tryed so many things to get these to work reguards matt
 
If you have the previous efforts, dump them and re download as they are totally re textured on the outside. I have also uploaded an N class Diesel in the new livery and a Vline VQAW articulated container flat set

All available at Victrainz look under content release announcements, these are made for 2004 and should be fine in later versions.

cheers
pete
 
Back
Top