Who is interested in the SR&RL and Maine 2 footers? Post here.

[KenRuof]

Not really missing, those three should not have been included as dependencies. The download below will fix it. The Trainzone content has been obsoleted by the new stuff and won't appear on the same computer.

http://darjeelingtrainz2.com/new_srrl/24 SR&RL Gondola LRN.cdp

Peter

Thanks Peter... that fixed the gondola, still have the same problem with a tack car and also the mega route is missing some of your stuff. I can post the kuids if you want. I had to fix a few of the assets (TS12 errors) but none of them were SR &RL related.

Thanks
Ken

 

[narrowgauge]

Ken

List here or email me about the missing items. Are you referring to the SR&RLFinal route? I loaded that and had no problems so the content you are missing should be on my machine. What was the car that was missing content?

Peter

 

[KenRuof]

Ken

List here or email me about the missing items. Are you referring to the SR&RLFinal route? I loaded that and had no problems so the content you are missing should be on my machine. What was the car that was missing content?

Peter

Here ya go

#24 SR &RL Water tank car L kuid...19207

Route is the big one kuid 64598 100351
kuids missing

15051
19237
19315
19391
19552
27902
27934
27991
27992

Thanks
Ken

 

[narrowgauge]

Ken

The first set 15051 - 19552 are obsoleted rolling stock and should have been replaced automatically by the later versions. I'll have to check if I fill in the details in the configs. The remaining four items I will have to find, they are not one any of my installs, which is strange. Be patient, I'll get back to you, probably tomorrow.

Peter

 

[narrowgauge]

Ken.

Here are the missing bits.

http://darjeelingtrainz2.com/new_srrl/log_stuff.cdp

Peter

 

[KenRuof]

Thanks narrowgauge

 

[teddytoot]

Peter
I am missing the following kuids which don't seem to be on the DLS :-

<kuid2:44700:19602:2> coach mesh file
<kuid2:44700:19603:1> flanger/toolcar mesh file
<kuid2:44700:50054:3> flanger bogey

Are they still waiting approval?

 

[narrowgauge]

John

You are actually missing nearly two thirds of my uploaded content. I uploaded 59 items and CM3.6 only shows 23. Nothing is waiting for approval. I wll have to sort out what is missing and try uploading them again.

Meanwhile perhaps you could download from this link, it contains every item.
http://darjeelingtrainz2.com/new_srrl/SR&RL_All_In_One.cdp

All the original content should be obsoleted by the new stuff. As a guide, if you have anything with build number less than 2.9 it is old content and is not required. It seems possible that I have not completely covered the old ones in the obsolete-table, if so, grab this link

http://darjeelingtrainz2.com/new_srrl/24 SR&RL Gondola LRN.cdp

As always I will appreciate comments and suggestions.

Peter

 

[KenRuof]

Yeah... I am down to only 4 missing kuids... the 3 from Tank car 19207:3 (the same ones the gon was missing) and one from the route by woodbridge kuid:44700:15051. Also is the a master session for this route?

 

[narrowgauge]

Ken

Thanks for your patience.

If you can wait, I will post a new link, but not for several hours, I have to buy food or starve..

If not, find the Tank Car in CM, open for Edit in Explorer and delete the three lines in 'Allowed products' containing those three numbers, then save and Commit.

The kuid:44700:15051 is an old number that even my records do not show. It is a log pile of some type, I will make a similar one with that number to fill the gap and you will get it in the link later.

You ask about a master session. When that route was made, sessions did not exist, they were called scenarios, not easy to make, and I am pretty certain that nothing of that type were made.

Peter

 

[JCitron]

Hi Peter,

I would like to thank you for updating these wonderful assets. I am in the planning stages now of a Maine 2-foot gauge line and it will be nice to run updated trains on it when the time comes.

Regards,

John

 

[narrowgauge]

Ken

Here are the links. If you made the changes ignore this one:-

http://darjeelingtrainz2.com/new_srrl/24 water tank.cdp

And the one for the route:-

http://darjeelingtrainz2.com/new_srrl/24 pine stack.cdp

John

I am pleased you like the SR&RL stuff, it is enjoyable to work with. Somewhere in my files I have a couple of cars I made for the Monson, if they are of any interest.

I have just heard that what appears to be all the remaining items have been approved.

Peter

 

[narrowgauge]

Something to add to the SR&RL stable. Probably should be in the new releases thread but it seems more in context here.

Here it is, take it for a run:

http://darjeelingtrainz2.com/new_srrl/24 SR&RL Excursion Car PRN.cdp

It gives you a chance to ride with the Westeners as I reserved seats for you at either end. Ride on the platform if you prefer.

Peter

 

[teddytoot]

Peter

Thanks for the links to get all the updated content. However I'm still missing rpearson's enginespec <kuid:65931:51215> for the Baldwin locos which doesn't appear to be on the DLS.

 

[narrowgauge]

John

Email me and I'll send it to you.

Peter

 

[KenRuof]

Thanks narrowgauge... looks like no more missing dependencies yeah!!! Also got the new coach looks nice.

 

[narrowgauge]

Pulp Rack Car errors

Teddytoot pointed out errors with the pulp cars loads, thanks, John. I also found that the 33ft car had the wrong shadow plane. The file from this link will fix all. The DLS copy has been updated so you should get the update from there in due course if you don't mind waiting.

http://darjeelingtrainz2.com/new_srrl/pulp rack cars.cdp

Peter

 

[narrowgauge]

An update on the excursion cars. Belatedly, I found that excursion car #30 and #31 differed in design. Hence you can now have both from here:-

http://darjeelingtrainz2.com/new_srrl/excursion cars modified.cdp

This brings up a point for discussion, the accuracy of the various cars. How accurate do you all want them to be. I can only go by the data I have, and the colours I use are just guesswork. If anyone finds any glaring errors. these I will fix quickly , minor ones can be fixed if they affect the appearance or the running but not so urgently.

Any that could be re-skinned for any other Maine 2 footers, give me the data and I will see if I can do something about it.

Peter

 

[KenRuof]

I also found an error in the tank car commodity. It is the same farm tractor as the box car so I am guessing it is a liquid tractor just pour it out and when the water evaporates instant tractor Also the steamers only work in DCC mode, no driver mode.

 

[narrowgauge]

I'll fix the tank car commodity tomorrow, but as far as 'driver mode' is concerned, I have no suggestions but I will have a looksee. I never use anything but DCC on the rare occasions when I actually drive a train. Bear in mind that these were originally made about eleven years ago when Trainz was still classed as a model railway simulator. Perhaps someone can comment and help, I would appreciate that.

Peter