Tutorial: How to use my SAP Hump Yard Kit for TRS19 or later

Hi Paul,
Well, something IS fishy. (Iam not suggesting it is your fault....Grin)
I have the decoupler set to 1.48 and at 5mph, 3 cars went over it without uncoupling.

Dave
 
For you hump yard fans I just recently released on the DLS the following items:

<kuid2:439337:117981:1> SAP_Point_Motor_Left_1_PBR
<kuid:439337:117992> SAP_Point_Motor_Right_1_PBR


These should work well in Hump Yard situations, along with my other components. Here is a screenshot of what one of them looks like:

New-left-and-right-point-motors.jpg


Bob
 
For some odd reason the Decouplers and the Retarders don't seem to work at all. I did it all by the books. It just doesn't want to decouple nor stop at the end of the tracks.
 
For some odd reason the Decouplers and the Retarders don't seem to work at all. I did it all by the books. It just doesn't want to decouple nor stop at the end of the tracks.
I ran a test in my TRS22 (build 128486) of both the decoupler and the retarder and everything appears to be working fine. My boxcar was decoupled and propelled to the speed I set and the retarder slowed the boxcar down to the speed I set. My locomotive speed was 3MPH when it approached the decoupler.

Questions: Did you set the trigger distance for each component to what I recommended (ie; 1.5 meters) in the tutorial?

Bob
 
I ran a test in my TRS22 (build 128486) of both the decoupler and the retarder and everything appears to be working fine. My boxcar was decoupled and propelled to the speed I set and the retarder slowed the boxcar down to the speed I set. My locomotive speed was 3MPH when it approached the decoupler.

Questions: Did you set the trigger distance for each component to what I recommended (ie; 1.5 meters) in the tutorial?

Bob
My Trainz 22 PE build is 128487. I forgot to add mine. My fault.
 
Back
Top