Issues with Bus behavior

[VeritechCEO]

Ok, I have a bus driving along between 20 and 40 mph. The bus approaches the bus stop, but stops at the edge of the bus stop, instead of completely onto the loading/unloading track, leaving the bus's back end sticking out and not next to the platform/sidewalk. Can anyone help me resolve this issue?

 

[NormP]

Is this a map you are making ? if so I would suggest that you adjust the Invisable track or if using the bus O'head wires as the track ,then lead the track in towards the Side walk or bus stop a little earlier, so that there is more track parallel to it before the expected stop position,then the rear of the bus will not stick out into the traffic lane.

Hope that helps.

NormP.

 

[VeritechCEO]

I found my problem. It had to do with how I was placing my invisable signals. Thanks for the help, anyway!

 

[Koondawg]

I was gonna say send the driver to a clinic for a P test....


KD

 

[tdstead]

Had this problem too

Extra invisible speed limits help as well at the correct diustance witch has to be worked out per bus maker depening on the engine specs he has used to slow the bus down to stop correctly, finding the right stops that work iwth the buses your using is the other problem. not sure why but certian buses like different stops. Been trying differtent ones my self, there was an old thread about this two that if still there would be a big help.

Tom