Australian screenshots
- Thread starter cook
- Start date
Not all of them had controls for running bi-di, it just depended which loco's you were running.
QR used wyes to turn their locos 99% of the time. Only the major depots (Rockhampton, Manly, Willowburn, etc) had turntables. In Rockhamptons' case, there were 2! (Although the fact that the depot itself was used to house ALL of the Beyer-Garratt fleet in the fifties - not sure of the total number of locos)
A Cityrail 620/720 set waits to depart at Coolomba (Great Route Anthony):
Cheers,
Tom
Could somebody please tell me if this beauty is available for TRS '04?
if not, is anyone converting it?
Cheers,
Torana.
Qurey, has anything happened yet?
Hi Guys, do you know if anything has happend with these C17's yet...
I know dreddman had some trouble and said he would give them to someone else to host.
Does anyone know anything about them?
Torana, your question about the railmotors has been answered.
Davido created these beauties, and they work in Trs 2004 as my friend uses them.
There kuid's are [FONT=Verdana, Arial]
60723:1118:1 / [/FONT]NSW CityRail 620 Class Railcar
[FONT=Verdana, Arial]60723:1119:1 / [/FONT]NSW CityRail 720 Class Railcar
They seem to have a lot of dependencies but its worth it!!!:udrool:
Hi Guys, do you know if anything has happend with these C17's yet...
I know dreddman had some trouble and said he would give them to someone else to host.
Does anyone know anything about them?
Torana, your question about the railmotors has been answered.
Davido created these beauties, and they work in Trs 2004 as my friend uses them.
There kuid's are [FONT=Verdana, Arial]
60723:1118:1 / [/FONT]NSW CityRail 620 Class Railcar
[FONT=Verdana, Arial]60723:1119:1 / [/FONT]NSW CityRail 720 Class Railcar
They seem to have a lot of dependencies but its worth it!!!:udrool:
Last edited:
nbrettoner
Bret_viS
Well, I've got the cliff splines converted to the VicTrainz kuid...
Also got a ground texture to go with them now
Zec
These look really interesting.
May I ask, has anyone taken them up & either are working on them or have them available for release??.
And Zec thank you for these initial early ones. What a great contribution.
Torana, your question about the railmotors has been answered.
Davido created these beauties, and they work in Trs 2004 as my friend uses them.
There kuid's are [FONT=Verdana, Arial]
60723:1118:1 / [/FONT]NSW CityRail 620 Class Railcar
[FONT=Verdana, Arial]60723:1119:1 / [/FONT]NSW CityRail 720 Class Railcar
They seem to have a lot of dependencies but its worth it!!!:udrool:[/quote]
Miappl,
Thanks for the info, good to know they work in '04
unfortunately without an '06 serial number i can't download them.
might have to bite the bullet and get a copy.
Cheers,
Torana.
P.S. It's show holiday here in Brisbane, good to spend some time on my layout finally. It's the simply things...
Enjoy life, while you have it.
Davido created these beauties, and they work in Trs 2004 as my friend uses them.
There kuid's are [FONT=Verdana, Arial]
60723:1118:1 / [/FONT]NSW CityRail 620 Class Railcar
[FONT=Verdana, Arial]60723:1119:1 / [/FONT]NSW CityRail 720 Class Railcar
They seem to have a lot of dependencies but its worth it!!!:udrool:[/quote]
Miappl,
Thanks for the info, good to know they work in '04
unfortunately without an '06 serial number i can't download them.
might have to bite the bullet and get a copy.
Cheers,
Torana.
P.S. It's show holiday here in Brisbane, good to spend some time on my layout finally. It's the simply things...
Enjoy life, while you have it.
try searching for SantaFe 120ft Turntable on the DLS, im pretty sure thats what it was called.
These look really interesting.
May I ask, has anyone taken them up & either are working on them or have them available for release??.
And Zec thank you for these initial early ones. What a great contribution.
Zec is the person fixing them up but other projects have gotton in the way and it's on hold.
Joining and checking the Victrainz site will give more info as to progress.
Anthony
Hi everyone, while sending and email to Noel (nbrettoner) about a layout we are working on that we need to build something or have some make it for us in Gmax, I realised that others may also like something like this.
What we are after is an irrigation canal, while this is easy to "build", the size (and mainly width) is not. Noel and I remember the days when we saw such canals and they where not so wide, the limitations of TRS are our problems. From my memory many of them where about 5-6ft wide and had an edge about 3-4 high on them so that the canal was higher then the surrounding land. This meant it was easy to water, make a hole in the embankment :hehe: or open a gate. The other thing that would be really handy for our layout is the irrigation wheel (image below) that was used to "force" the flow of the water around a farm or area.
The area we are talking about are the Irrigation areas of south west of NSW. If anyone can offer any suggestions or help us it would be much appreciated.
Craig
What we are after is an irrigation canal, while this is easy to "build", the size (and mainly width) is not. Noel and I remember the days when we saw such canals and they where not so wide, the limitations of TRS are our problems. From my memory many of them where about 5-6ft wide and had an edge about 3-4 high on them so that the canal was higher then the surrounding land. This meant it was easy to water, make a hole in the embankment :hehe: or open a gate. The other thing that would be really handy for our layout is the irrigation wheel (image below) that was used to "force" the flow of the water around a farm or area.
The area we are talking about are the Irrigation areas of south west of NSW. If anyone can offer any suggestions or help us it would be much appreciated.
Craig
freightcar2
New member
:hehe: 
I'm letting you kow right now. 
Willem2
Trainzer Kuid 97008
Noted.
seeseeme,
something like this?
(first draft), I'll play around with hiding it in the canal sides.
Let me know.
Cheers,
Bill.
freightcar2
New member
I'm letting you know again!! :hehe: :hehe: :hehe:
nbrettoner
Bret_viS
WOW Bill, I never expected something so fast. Yeah thats great :Y: , I'll have to let Noel know so he checks the thread.
Any idea about a spline for the canals ?
Many Thanks,
Craig
Hi Bill,
I have to go out for an hour, then home for a bit & will get some pics of that waterwheel & small sluice gates etc. I also have some reasonably good pics of canals & small channels.
Could you please email me or IM me with your email address so I can get it to you?.
Many thanks for your interest & kind offer to help Bill.