Japan

HiBaller · Sep 27, 2018

@Alexmaria: If you compare the real picture with your reskin you can see the windows themselves are a tiny bit larger on the reskin. This pushes them down into the light green stripe. If the windows on the reskin were smaller (and more numerous) then I think the paint would be fine.

Bill

Rizky_Adiputra · Sep 27, 2018

@hirochi : Thank you very much for your effort.
I've little request. Could you rebuild the existing E6 series shinkansen ? the current E6's in the DLS just like repaint from E5.

@AlexMaria : Hey, Do you still have some connyxy's old screenshot ? I just want to see some of her amazing screenshots, especially Tokyo Station screenshot.

Here my little project :
Using arduino leonardo and potetntiometer to control the train lever (Custom onehandle lever include 5 lvl brake + 1 neutral + 8 lvl brake + 1 emergence). Currently thinking about use 3D Print for the lever.

AlexMaria · Sep 27, 2018

Prince271088 said:
Alex,

I'm sorry if this has been addressed already but I've downloaded your megapacks and have 59 consists with missing dependencies all tied to your ID. Any idea where I can get them?

<kuid:668654:101224>
<kuid:668654:100841>
<kuid:668654:101273>
<kuid:668654:100851>
<kuid:668654:100855>
<kuid:668654:101223>
<kuid:668654:101271>
<kuid:668654:101222>
<kuid:668654:101270>

Ben =)

p.s. Fantastic work btw.

Out of all of those i've found these three:

<kuid:668654:100841> JRC TRTA 01 series - Ginza Line [M]
<kuid:668654:100851> JRC TRTA 02 series - Marunouchi Line [K]
<kuid:668654:100855> JRC Tokyo Metro 02 series (refurbished, logo) - Marunouchi Line [K]

Wich is intresting as they shouln't be included with the 201/205/E231 series reskin pack, (they are in fact part of the 01/02 series pack avaible here: https://drive.google.com/open?id=1eENjPq8nMT4N5eBnROR5plH7j3ED-HaQ , wich does not contain consists).

All the other are unknown, they must be obsolete content i've deleted.

Wich consists have missing dependencies?

Rizky_Adiputra said:
@AlexMaria : Hey, Do you still have some connyxy's old screenshot ? I just want to see some of her amazing screenshots, especially Tokyo Station screenshot.

Her site might be closed, but the WayBack Machine (Internet Archive) comes to help!

https://web.archive.org/web/20070901000000*/http://www.connylubing.de/

The site ceased any activity around 2009/2010.

Tokyo Station Page (archived on the 11 February 2010)

https://web.archive.org/web/20100211152832/http://www.connylubing.de:80/

Prince271088 · Sep 27, 2018

AlexMaria said:
Out of all of those i've found these three:

<kuid:668654:100841> JRC TRTA 01 series - Ginza Line [M]
<kuid:668654:100851> JRC TRTA 02 series - Marunouchi Line [K]
<kuid:668654:100855> JRC Tokyo Metro 02 series (refurbished, logo) - Marunouchi Line [K]

Wich is intresting as they shouln't be included with the 201/205/E231 series reskin pack, (they are in fact part of the 01/02 series pack avaible here: https://drive.google.com/open?id=1eENjPq8nMT4N5eBnROR5plH7j3ED-HaQ , wich does not contain consists).

All the other are unknown, they must be obsolete content i've deleted.

Wich consists have missing dependencies?

Her site might be closed, but the WayBack Machine (Internet Archive) comes to help!

https://web.archive.org/web/20070901000000*/http://www.connylubing.de/

The site ceased any activity around 2009/2010.

Tokyo Station Page (archived on the 11 February 2010)

https://web.archive.org/web/20100211152832/http://www.connylubing.de:80/

Hi Alex,

Thanks for getting back to me. Initially the number was at 59, that has now gone to 55. I think the other ones might be cleared up for the most part by finding <kuid:181574:1426> which belongs to Matura, but both TrainzKuidIndex and running the KUID through Google found nothing. Do you (or anyone else) in here have this KUID, it's from <kuid:461543:100081> JRH E233 2000 DT71Abogey by Hirochi.

Ben =)

Prince271088 · Sep 27, 2018

AlexMaria said:
Wich consists have missing dependencies?

Hi Alex,

I did a temporary fix to the consists that had the problem with the bogey. The remaining two assets are the ones that bring up the 6 missing KUID

<kuid:668654:101225> Untitled
<kuid:668654:101275> Untitled

Ben =)

HiBaller · Sep 28, 2018

A few shots from my work in progress: The Towada Kanko Railway.

Still have a long way to go.

Bill

ricardolucasandoval · Sep 28, 2018

Shinkansen horn that was never realeased on the DLS

Nice route Bill btw.

Forester1 · Sep 28, 2018

Hiballer, that is looking great!

hirochi · Sep 28, 2018

@Rizky_Adiputra: I think Repaint E5 RED is beter. E6 is very complicated.

AlexMaria · Sep 28, 2018

Prince271088 said:
Hi Alex,

I did a temporary fix to the consists that had the problem with the bogey. The remaining two assets are the ones that bring up the 6 missing KUID

<kuid:668654:101225> Untitled
<kuid:668654:101275> Untitled

Ben =)

First one is unknown, second one is the Consist for the Chuo Rapid Line 201-900 series (3+7 car set), avaible here:
https://drive.google.com/open?id=1113uEwHk1Wjsv-A9FueiCXjwlgGZqnzy

Prince271088 · Sep 28, 2018

AlexMaria said:
First one is unknown, second one is the Consist for the Chuo Rapid Line 201-900 series (3+7 car set), avaible here:
https://drive.google.com/open?id=1113uEwHk1Wjsv-A9FueiCXjwlgGZqnzy

Thanks - And finally do you have <kuid:181574:1426>

It's the only file I can't find. It'a a bogey sound I believe.

pagroove · Sep 29, 2018

HiBaller said:
A few shots from my work in progress: The Towada Kanko Railway.
Still have a long way to go.

Bill

Very nice route HiBaller. I would like to see more of it. Please keep us posted

.

matura · Sep 29, 2018

Prince271088 said:
Thanks - And finally do you have <kuid:181574:1426>

It's the only file I can't find. It'a a bogey sound I believe.

Hi. It's my bogeysound and it's available in my pack "JR bogeysounds by Matura.cdp" download here

ricardolucasandoval · Sep 29, 2018

Guys i have a problem. (I have trainz 12 v3.6) And the Bridges on the game wont connect unless its height
is minus than 10.00, is there a way to fix that?

HiBaller · Sep 29, 2018

Can you raise or lower the vertex point after you attach the track?

Bill

ricardolucasandoval · Sep 29, 2018

HiBaller said:
Can you raise or lower the vertex point after you attach the track?

Bill

Yes i can.

HiBaller · Sep 29, 2018

Is it all bridges, or a particular bridge? Has this been happening for a while, or did it just start? What is your build number?

BIll

Prince271088 · Sep 29, 2018

ricardolucasandoval said:
Guys i have a problem. (I have trainz 12 v3.6) And the Bridges on the game wont connect unless its height
is minus than 10.00, is there a way to fix that?

If you can't raise the bridge (or any object) or above or beyond a certain height, then you need to do a quick amend of the config file. There's an entry in there called height-range. You can enter whatever figures you need in that and that will allow you to raise the bridge/object beyond 10m (unless you use a figure below 10m). The only other thing I can suggest is try connecting the adjoining road from both ends. By that I mean try taking the road to the bridge and if that doesn't work take the road from the bridge to the bit of road.

Hope that helps

ricardolucasandoval · Sep 29, 2018

HiBaller said:
Is it all bridges, or a particular bridge? Has this been happening for a while, or did it just start? What is your build number

BIll

All bridges
Build number: 48249

Prince271088 · Sep 29, 2018

matura said:
Hi. It's my bogeysound and it's available in my pack "JR bogeysounds by Matura.cdp" download here

I have been after that for the longest time.

Thank you

Japan

19 Years of Trainz

Enter your title here ..

Ente Ferrovie dello Stato

New member

New member

19 Years of Trainz

New member

Well-known member

Trainz hiyoko

Ente Ferrovie dello Stato

New member

Active member

Never satisfied builder

New member

19 Years of Trainz

New member

19 Years of Trainz

New member

New member

New member

Similar threads