Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Very slow download, 1 hour, run out of 4G data, renews on the 18th, anyway had to download on a miserable 2.8Mbps ADSL, least that isn't capped!
Otherwise install went fine, shiny splines now fixed so now we're cooking!
Any ties with the British prime minister?
In my main test session based on a much-enlarged 'Far Horizons' route, all built-in SD45s (ATSF SD45 and SP SD45, etc. and several other diesel locomotives) now crawl at a fraction of their usual speeds and don't have sufficient tractive effort to haul their normal loads.
Just me? Or are others experiencing this too?
Steam locos don't seem to be affected. German electric locos have appropriate physics applied...
Nice to see coal loads looking less like glittering silver ore once again.
Edit Update: Further investigation shows that the Train Brake is still applied (i.e. doesn't release) to the SD45s. You can release them in Driver Cab Mode, but AI and DCC locos still have them applied.
Mac version...
Several sessions in Canadian Rocky Mtns and Niddertalbahn have:
unknown asset kuid2:401543:1166:9
Missing dependencies were initially reported on routes but after a restart of TRS19 there were no warnings on the routes but sessions had the unknown asset issue.
But...
Enviroment loading, please wait
More than 45 seconds to load, the the previous update only 5 to 10 seconds to load
.....
Known issues:
* Initial load of the main menu is slow (possibly several minutes)
Nope - Just adds to my list of affected diesel locos!Does replacing the locos and resaving solve the problems?
Yup - I have a Gigabit broadband Internet connection, but instead of blazing download speeds last night, I saw speeds peak out at a lowly 320 'Kib' (to use their download metric nomenclature).Very slow download, 1 hour,
Downloaded and installed build 97923 without problems but some of content is faulty as shown in this image:
{snipped}
Tony_Hilliam -
Nope - Just adds to my list of affected diesel locos!
About to send a test track loop & session containing just a few of the locos where this problem manifests itself. (The list could be much longer!)
All have train brakes applied at outset. In AI mode or DCC mode, the brakes simply don't release, so the engines work really hard to overcome this failure to release.
Of course, if you go to manual drive mode, you can release the brakes (currently about 50% applied) and proceed normally. Once in motion, however, and you switch driving mode to DCC or AI, the brakes are re-applied!
Renders most of my diesel-powered AI sessions useless, since I am otherwise unable to drive 20+ consists simultaneously in Cab mode.
This doesn't sound good. I have nothing but diesels running on my routes. There's going to be a lot of squealing brakes and brake dust in the air!
Have you updated to 97925?
davesnow - but check out the coal and woodchips textures. They are no longer shiny and glittering like high-grade gold and silver ore!