Where's my drivers?

[Alco_P-A]

Create a new session. It'll be easier.
Remove all your existing consists you placed on the route.
Place your consists.
Assign drivers in Driver setup.

There are options at the bottom of the Driver setup screen. Check the ones you want to use.
You should be all set now.

Where would I look for driver set up and driver set up screen?

 

[pware]

Driver Setup is a Session Rule. It only works in Sessions.

From the Surveyor Screen menu icons (top left of the screen) open the Edit Menu (the 2nd from the left) then select the option Edit Session.

The Driver Setup Rule is usually the top rule in the list. Click on it then click on the Edit button at the bottom of the window.

All the locos will be listed with drivers and (if added) their AI driving commands.

A more detailed description of how to use the Driver Setup Rule can be found on the Wiki at https://online.ts2009.com/mediaWiki/index.php/How_to_Use_Driver_Setup_Rule

Make sure that you save the Session and give it a distinctive name (don't leave it as "Default").

 

[Alco_P-A]

Driver Setup is a Session Rule. It only works in Sessions.

From the Surveyor Screen menu icons (top left of the screen) open the Edit Menu (the 2nd from the left) then select the option Edit Session.

The Driver Setup Rule is usually the top rule in the list. Click on it then click on the Edit button at the bottom of the window.

All the locos will be listed with drivers and (if added) their AI driving commands.

A more detailed description of how to use the Driver Setup Rule can be found on the Wiki at https://online.ts2009.com/mediaWiki/index.php/How_to_Use_Driver_Setup_Rule

Make sure that you save the Session and give it a distinctive name (don't leave it as "Default").

What is strange to me is I went back to my previous layout builds to see if this problem is in them and it's not. All drivers in their loco's and everything works fine.

 

[Alco_P-A]

When I place an engine in session and it shows a driver already what do I do with the current driver? Also, when I run my previous built routes in which loco's and consists were placed in surveyor originally and open the session to run them all the consists, they have their drivers in the designated locomotives and run fine. Why would this be then but not now? What caused the change do you think?

 

[JCitron]

When I place an engine in session and it shows a driver already what do I do with the current driver? Also, when I run my previous built routes in which loco's and consists were placed in surveyor originally and open the session to run them all the consists, they have their drivers in the designated locomotives and run fine. Why would this be then but not now? What caused the change do you think?

Things got out of sync with UDS.

 

[Alco_P-A]

Things got out of sync with UDS. So, what's the fix for it?

 

[Alco_P-A]

Create a new session. It'll be easier.
Remove all your existing consists you placed on the route.
Place your consists.
Assign drivers in Driver setup.

There are options at the bottom of the Driver setup screen. Check the ones you want to use.
You should be all set now.

So far, I still have to assign drivers. What am I doing wrong?

 

[stagecoach]

How many sessions show for the route?