TRS 19 Realistic Driver mode: All locos will not accelerate in Driver

[ricomon35]

This is a problem I've recently encountered in TRS2019:

All locos in all sessions will not accelerate forward or reverse.

All brakes are off, direction control set, throttle moved forward (to any setting) and zero movement is the result.

I can switch to DCC and the loco will drive normally, for that mode only.

I can accelerate in DCC, then switch to Realistic, and the Loco then comes to a screeching halt as if the brakes were on.


My theory is that the brakes are on, but show off.

No idea how to fix this.


Rico

 

[PC_Ace]

ricomon35 - Suggest you use the 'D' key to bail the brakes (i.e. dump brake cylinder pressure).
Hit that key a few times after releasing the train brake ('Q') and/or Loco brake ('E') and watch the BC value go down towards zero...
See how you go and report back here if successful (or otherwise).
Good luck with this quest!

 

[ricomon35]

Thanks PC_Ace.

All systems green... We are go for departure. :Y:

Yeah, I know, wrong sim, but it sounds cool...

Rico