searchlight and safetran signal problem

[12343]

Hi!
recently ive downloaded the JR searchlight and safetran signals.
ive downloaded all necesary things for those signals, scripts, meshes, but i still have a problem with them
They are all keep show in red, everything i do.
In comparation the other similar but old searchlight signals are ok:

adult image

picture share
theres nothing faulty at them:'(
what can i do?

 

[ryanstrains]

Signals should be either red, yellow or off depending on the railroad, if you put a train on the tracks you should get an indication.

 

[jkinzel]

Put an engine on the track. The lights are red by default if there is no traffic.

 

[12343]

The only indication ive got on the lights is "No train aproching", even if i put a train on the track, the indication is the same "No train aproching"

 

[shaneturner12]

That would indicate that the signal is not picking up the train's presence. Try moving the train back a bit or re-placing the signal. Also, check the heading on the train (the green/red arrows).

Shane

 

[p-dehnert]

The heading of the train is important.

Peter

 

[JCitron]

The heading of the train is important.

Peter

Yup. I have learned that one the hard way...

John

 

[justinroth]

And signal overlap. Space the signals out more.

 

[Falcus]

And signal overlap. Space the signals out more.

Do JR signals have issue with overlap? I've dropped a few up together at the end of a route and not had a problem, but I've never done anything like what the OP has done. Just asking so I know for future reference if I ever find myself in that situation.

Thanks,
Falcus

 

[12343]

Problem solved
I've forget to put an important piece to for signals:

screen shot pc

upload pic
Now they work fine
Thanks for all help