JR Route Release: Eagle River Railway

[brucem56]

Was wondering if a cure was ever found for this problem?

Tks

Scratchy,
Sorry, no joy. Locked at the signal in the Myrtle Yard, heading back with the load of logs in Session 4. Made it to the loading point and got the logs all loaded. Now I can't get past Signal 1090. Locked on Red. No other trains anywhere on the route. Very odd. I saved, exited, opened to see if things had changed. Nope. Still Red. I tried easing through the red, but the session ended with my illegally passing the red. Scroll to the right to see the HUD showing the red signal in 0.022 miles. The two switches are showing correctly for my path, but I can't get past the signal.

Gary

 

[btvfd]

 

[pitkin]

Is this route editable, as in replacing the trees or other assets?

 

[HPL]

Fully if you buy it from JR.

 

[harpman]

Awesome locomotive!

Great looking locomotive! What is it? I know it's a reskin but the work is wonderfully done.

 

[btvfd]

It's a reskinned MP2800/C from JR

 

[harpman]

Re: MP2800/C

It's a MP2800/C from JR

Thanks! I guess it's only available in the content pack for Midwest Grain 4.0.

 

[btvfd]

My crew needed some HEP ( Head End Power ) for the steam excursion train.

 

[BigBoyBen54]

Nice. Do you plan on adding some steam locomotives for the TPTC?

 

[JCitron]

Was wondering if a cure was ever found for this problem?

Tks

Regarding the signal issue...

I placed a ground signal just near the wireless radio cabinet and that helped.

 

[pitkin]

The unloading grate has a JR MultiIndustry under it.

 

[pitkin]

Regarding the signal issue...

I placed a ground signal just near the wireless radio cabinet and that helped.

The OP can try clearing the locks in the SetJunctions rule. Then just drive through the signal.

 

[tdstead]

Getting a lot of play time from this route worth the money thanks

Dont forget more steam for free mallets #19 and 20 from trainbo1 trainz-forge

http://trainz-forge.com/p/freeware

Just a maybe silly question that has already been answered ....
after the camp B run we leave some log wagons that we were spose to pickup for camp A next day but now on return run and we didn't something left out of session?

 

[tdstead]

Ok got a problem In TANE SP3
Running Excursion Train have got to Keane was told 2020 has faulty Heater need to turn train around
Done first leg of Y ok but on reversing the 2nd got this after stopping at a double red drawf and putting cursor over that signal, the points are locked no manual control, there is no trains in the old lumber yard or on Lumber A branch ... Signal 534634 Train in block has not cleared path

Thanks in advance

Tom

 

[pitkin]

Ok got a problem In TANE SP3
Running Excursion Train have got to Keane was told 2020 has faulty Heater need to turn train around
Done first leg of Y ok but on reversing the 2nd got this after stopping at a double red drawf and putting cursor over that signal, the points are locked no manual control, there is no trains in the old lumber yard or on Lumber A branch ... Signal 534634 Train in block has not cleared path

Thanks in advance

Tom

Edit the session and unlock any or all junctions in the Set Junctions rule.
You will probably have to start the session over.

 

[tdstead]

in the end passed the red signal with no problems

Tom

 

[FerrousRails]

Please Help, <kuid:506034:98742> ERSX 54ft flatcar

I have tried just about everything, but I cannot find the solution to this.

<kuid:506034:98742> ERSX 54ft flatcar, comes up as Faulty, the error message given is:

; <kuid:506034:98742> Validating <kuid:506034:98742>
; <NULL> MeshResource::LoadResource> <NULL> | arc:fld:$(local)/hash-3B||kuid 506034 98742.tzarc|
; <NULL> Loading mesh mesh_body/arn.trainzmesh
- <kuid:506034:98742> TrainzMeshFile_Load> unable to open output file for reading: mesh_body/arn.trainzmesh
- <kuid:506034:98742> VE77: Unable to load indexed mesh 'mesh_body/arn.lm'
- <kuid:506034:98742> VE76: Unable to load mesh file: 'mesh_body/default_mesh.trainzmesh'
; <NULL> MeshResource::LoadResource> <NULL> | arc:fld:$(local)/hash-3B||kuid 506034 98742.tzarc|
; <NULL> Loading mesh mesh_body/lod_5.trainzmesh
- <kuid:506034:98742> TrainzMeshFile_Load> unable to open output file for reading: mesh_body/lod_5.trainzmesh
- <kuid:506034:98742> VE77: Unable to load indexed mesh 'mesh_body/body.lm'
! <kuid:506034:98742> VE146: An asset must be specified for tag 'product-kuid'.

When opened for edit it seems like body.im is missing. I do not know where to find it. After a lot of frustration I have this route finally working except for <kuid:506034:98742> ERSX 54ft flatcar. It also seems that the following assets are dependent on each other which are dependent on ERSX 54ft flatcar, which are also Faulty:
<kuid:506034:634702> Logs spruce 45 ton for 54ft deck (100% wetness)
<kuid:506034:463149> Wrecked 54ft flat car

Any help would be appreciated to resolve this. I had to reinstall Tane from SP1 all the way to the current SP3, but this route has been a learning experience!

Thanks in advance,
Steve

 

[scratchy]

Sorry to hear you're having dramas Steve, I've asked the creator if he knows of any solutions otherwise I can PM you a link of the flatcar that I have installed.

 

[Wearsprada]

Try to re-install this asset <kuid:506034:98742>.
I don't have any issues with this conten in SP3 and beta SP4 for TANE.

 

[FerrousRails]

Rich,

You have a PM regarding this matter, thanks!

Steve