Interesting loads
- Thread starter cookiemae
- Start date
LV --
I had the same problem too.
So if you read above:
"All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed, except you may have to download the bogeys for the out-of-gauge flat car (look for kuid 114867:1049) and the textures for the R class loco crew (kuid 44090:57003). Download Helper in TRS2004 does not capture them for me."
Phil
I had the same problem too.
So if you read above:
"All the items of rolling stock needed by the session will be downloaded from the Download Station when the session is installed, except you may have to download the bogeys for the out-of-gauge flat car (look for kuid 114867:1049) and the textures for the R class loco crew (kuid 44090:57003). Download Helper in TRS2004 does not capture them for me."
Phil
The "Oversize" session is now on the Download Station. Remember that only the oversize plate cars are actually interactive (that is, load and unload).
Ish --
I suspect that you want to see all your wonderful buildings!? Well, anybody who drives "IndustRail" will see plenty.
Otherwise, the industrial site on IndustRail where where logs are processed:
And the log sorting yard:
The paper mill, loading paper products on to centerbeams:
Interactive cattle pens:
And interactive meat processing plant:
Scrap wharf:
And the cement plant:
nutter --
All the loads are on the Download Station.
The USS flat cars are by Tyler Bishop. Try here:
http://trainzlocomotiveworks.com/downloads/
Phil
Ish --
I suspect that you want to see all your wonderful buildings!? Well, anybody who drives "IndustRail" will see plenty.
Otherwise, the industrial site on IndustRail where where logs are processed:
And the log sorting yard:
The paper mill, loading paper products on to centerbeams:
Interactive cattle pens:
And interactive meat processing plant:
Scrap wharf:
And the cement plant:
nutter --
All the loads are on the Download Station.
The USS flat cars are by Tyler Bishop. Try here:
http://trainzlocomotiveworks.com/downloads/
Phil
.......here's a suggestion for those who show screenshots of items such as 'loads'. How about including with the screenshots the KUID number or site in which they can be located. It seems that every single time such items are shown someone - including myself, would like to know where to get them.
What do you all think??
roymac
What do you all think??
roymac
nice Phil,
When i tried to DL Industrail, it DL'ed, but when i loaded it?
my FPS went..... Buzzzlipt, straight down. I can't run that route, too heavy in polys, lol
Well, to have an american fix on the cement plants, i am going to make a special american Cement Car, similar to what the LV ran.
But, that is still far to come.
Cheers,
Sean A.
TER Route Builder
When i tried to DL Industrail, it DL'ed, but when i loaded it?
my FPS went..... Buzzzlipt, straight down. I can't run that route, too heavy in polys, lol
Well, to have an american fix on the cement plants, i am going to make a special american Cement Car, similar to what the LV ran.
But, that is still far to come.
Cheers,
Sean A.
TER Route Builder
caddy --
Hmm --maybe the bogeys could be used like those old style logging disconnects? Use a bogey at each end with the steel pate chained down onto them.
The freight car is kuid 114867:1050. It's just that when you download the car the bogeys gets left behind on the Download Station.
Interestingly, there is no steel plate load. What you see is not what you get. I load it with 2 x 2m coil, but on the car itself it shows as plate.
Hi Roy --
An excellent suggestion. You will find that almost all of the loads I've shown are on the Download Station and, in fact, come with the LARS and ProtoLARS tracks that I made for the very purpose of loading freight cars.
Look for kuids [FONT=Verdana, Arial]69871:10001 and [/FONT][FONT=Verdana, Arial]69871:10002, then click on "Download Page". It will show an extensive list of loads used with these tracks.[/FONT]
Sean --
I'm quite surprised at that. Because I use a limited number of assets, particularly those by Ish, but in many different combination the route is actually is very kind on frame rates.
In fact I remember one comment way back in which a person observed that he gets better frame rates on my routes than he does on a blank baseboard.
I run a P3.2 with 2G RAM and Nvidia GeForce 6600 GT, which was good at the time but is only mid-range now. The route runs smoothly for me, except for the approaches to Galore where it stutters slightly when it has to load a number of poly-intensive structures.
Phil
Hmm --maybe the bogeys could be used like those old style logging disconnects? Use a bogey at each end with the steel pate chained down onto them.
The freight car is kuid 114867:1050. It's just that when you download the car the bogeys gets left behind on the Download Station.
Interestingly, there is no steel plate load. What you see is not what you get. I load it with 2 x 2m coil, but on the car itself it shows as plate.
Hi Roy --
An excellent suggestion. You will find that almost all of the loads I've shown are on the Download Station and, in fact, come with the LARS and ProtoLARS tracks that I made for the very purpose of loading freight cars.
Look for kuids [FONT=Verdana, Arial]69871:10001 and [/FONT][FONT=Verdana, Arial]69871:10002, then click on "Download Page". It will show an extensive list of loads used with these tracks.[/FONT]
Sean --
I'm quite surprised at that. Because I use a limited number of assets, particularly those by Ish, but in many different combination the route is actually is very kind on frame rates.
In fact I remember one comment way back in which a person observed that he gets better frame rates on my routes than he does on a blank baseboard.
I run a P3.2 with 2G RAM and Nvidia GeForce 6600 GT, which was good at the time but is only mid-range now. The route runs smoothly for me, except for the approaches to Galore where it stutters slightly when it has to load a number of poly-intensive structures.
Phil
Last edited:
Dnutterm those USSteel Bulkheads are from TLW.
How you have find? These from in DLS or World of Trainz or other???
Search there, under rollingstock, it should be there.
larsmars223
Trainz Engineer
Phil
this is an interesting wagon
Where do we get this wagon?
Do you have a kuid for this?
Its russian (FYI)