helpful advise needed with a few problems

[misterchugg]

hi
i have some dramas

first is this script error

how do i fix this?
asset-x did nothing when i ran it



i have a few vehicles that throw this stupid shadow, which ruins the look
is there any way to get rid of this?



how do i fix it so the wheels show on top of the bridge road?





anybody know better platforms and station buildings for ipswich??
i cant find anything suitable

also looking for a 3 story signal box

 

[BuilderBob]

i have a few vehicles that throw this stupid shadow, which ruins the look
is there any way to get rid of this?

The shadow is a part of the asset mesh. You can adjust the transparency of the texture that is used for that part of the mesh to make it less prominent.

how do i fix it so the wheels show on top of the bridge road?

Lay an invisible road on top of the bridge at the correct height to make the wheels touch the bridge surface. You will need to carefully manipulate the spline points so that the approach road connects to the invisible road and not to the bridge road.

 

[stouthm]

I can help with one of your problems. You have to raise the vehicle on the bridge to the correct height using one of those buttons on the flyout for structures. It has a small arrow/arrows on it. Good luck.

 

[misterchugg]

hi mates
sofar i haven had any luck getting the wheels up
thanks
ron

 

[Roy3b3]

Hi Ron,

If the vehicles are stationary objects, you can raise the height level (the height adjustment arrow button) just above your road.
If they are moving vehicles, then use an invisible road and set the spline height marginly (about + 0.05 or 0.10) above the regular road.
Good luck,
Roy3b3

 

[misterchugg]

hi
even with the height-range -10,50 set, some cars are still running with buried wheels.
i will keep trying
thanks
ron

 

[BuilderBob]

even with the height-range -10,50 set, some cars are still running with buried wheels.

So is the problem now that some cars are running below the visible surface? That is a different question. What region are you using?

 

[misterchugg]

australia bob.
right hand drive

 

[BuilderBob]

australia bob.

Do you mean <kuid:-25:246>? The list of vehicles for this region is available within the asset's config.txt. They all come from the same source and AFAICT they are all set to the correct height.

You should lay a strip of the invisible road you are using on a blank piece of landscape. It the problem still occurs then your list of carz for this region is wrong.
If the problem goes away there is something wrong with the configuration of the bridge. For instance, when you laid the invisible road at the correct height and connected it to the approach roads, did you change the bridge road to one that has no cars?

 

[misterchugg]

hi bob
yes, it has to be the bridge road
i tried changing the road, but it kept coming up with errors and asset x couldn't fix them
i will try to find a better bridge which is suitable
the bridge i have


post images


the bridge i need. sort of has to look similar


jpg images