GMax and 3DSMax (And any other modeling program) screenies/renders

[bekaember]

nice job!!! I realy like the meshes ...

I don't know for wich countrys you made those catenary wires, but would it be posible, that you paint one kind of catenarys in german colour (green)?

Will they be released for TS09???

Mutch luck
Sachsenbahner

Hello,

Thanks for your reply. This will be a prototypical Hungarian Catenary system, it is 99% similar than the german system you have.
Will be compatible with KlausM's system, any yes, it will be compatible with TS2009 (will require compatibility mode).

Krisz :wave:

 

[yojimbo]

Re 4/4 Iv - Swiss Top flop

This one is somewhat special. The Swiss federal railways wanted a new and powerful locomotive using state of the art tecnology (we are speaking late 70'ies) and the result was a small flight of four engines of the Re 4/4 IV type numbered 10001 - 10004.

The powerpack relied on thyristors and this proved to be a very powerfull but unstable solution, so only the four prototypes were built, and after a short time - mostly spent waiting on sidings because of malfunctions and lack of spares - they were sold off to the privately owned Südostbahn, where they still serve with distinction as Re 446 111 - 114 sporting a variety of colorfull full body commercial paintjobs.

As you might notice the bogies are missing but opposed to the NPZ they are decently covered in books and photos, i.e. tentative release before Christmas.

 

[UP5521]

Thats good,nice work!

 

[yojimbo]

Ready to roll - lacking textures

SBB Re 4/4 IV with preliminary textures http://forums.auran.com/trainz/showpost.php?p=520101&postcount=2343

 

[iceman2117]

greets ice

for the Rest of Globus ..
http://s10.directupload.net/images/091127/wxdkymmz.jpg

 

[MAGLEVSX]

Got my hands on a graphics tablet (Finally)
Manhattan 8 x 6 Graphics tablet for only $110 at my local computer shop.
This is the Image I drew with it.
Hmmm safe to say I will never be a good graffiti artist.

 

[Scitimar]

Got my hands on a graphics tablet (Finally)

It must be christmas .. Seriously though , congrats man , lots of learning and fun ahead for you now :Y: . I'll be looking to see somethig like "Netherworld Archipelago" from you in January :hehe:

Sci

 

[Ronayne]

Heres some creations from me...

^ A railway station. Can anyone tell what country its from??

^ A large railway yard control tower.

 

[S301]

First test bake of the normals maps for the main building... The windows are fine, but I need to tweak the material ID's for the main building for the projection maps



If anyone has any suggestions, please let me know Remember, it's not finished, so suggestions are best left now!

Zec

 

[Ronayne]

Heres a small tram i'm working on in Gmax. Its just a random one I made up. It still needs alot to be done on it.

Chris :wave:

 

[bigboy4010]

 

[yojimbo]

One SBB Vacuum cleaner to go.

Due to its shape the very noisy air intakes and the inherent extreme noise inside the cab at high speed this locomotive quickly earned the nickname "Staubsauger"

 

[ish6]

Cernavoda Bridge, the bridge across the main branch of the Danube River, near Cernavoda, Romania, is now available on DLS. It was projected by Anghel Saligny and built between 1890-1895.

It's an old post but I just scanned through these pages, and fell for this bridge .... well done!!

 

[simulatortrain]

Due to its shape the very noisy air intakes and the inherent extreme noise inside the cab at high speed this locomotive quickly earned the nickname "Staubsauger"

VERY nice engine you've got there. How hard will it be to reskin?

 

[yojimbo]

VERY nice engine you've got there. How hard will it be to reskin?

I am curious to know which skins you are thinking about.

This particular version however is not the best option when it comes to reskinning, but no 10104 will serve as basis for the more colourful liveries given its simple red and grey paint scheme.

I am still making baby steps in the UWV unwrap department so there will probably be a couple of updates before the optimum mapping is in place. Then we can proceed to the more complicated bill board liveries of the present operator. (http://alanmitchell.fotopic.net/p13340586.html)

Ultimately I should mention that this is a payware item, but you are free to reskin it as much as you want.
If you want to publish your skins, we can work out an arrangement for that as well.
My prime concern is the 3D mesh and my license from the Swiss Federal Railways, hence I would like some say in matters concerning third party textures. Please note that this has nothing to do with money at all rather some contractual obligations towards the copyright holders.

If this has not scared you off, then drop me a mail/pm and let us deal with the details off-forum.

 

[yojimbo]

Double posting.......

So rather than wasting it; why not post something.

 

[simulatortrain]

Oh then, if it's payware, I guess not. Still a great engine!

 

[Wessex_Electric_Nutter]

And all of them are still not finished.

 

[topae]

An old DB Avmz 111 :wave:.

Greets

Torsten

 

[yojimbo]

Cab in the making

The cab belongs to this one. There are still the odd details missing, but I think you get the general idea