Australian screenshots
- Thread starter cook
- Start date
NSWGR_46Class
Just call my Captain Rude
Well done if the DLE see's that tender tank lid open that fireman is going to get a bung
The tractor is a wee bit mew for the steam era laddie
It looks like a RRMods SD50, great models they are, I'm waiting on their GP7/9's and the Athearn GP7/9's is a must have when they come outwhats with the SP Black Widow?:hehe:
-Aaron
Actually it is Jointed Rails' SD50 in a fictinal Black Widow livery, I must say it's a pretty detailed locoIt looks like a RRMods SD50, great models they are, I'm waiting on their GP7/9's and the Athearn GP7/9's is a must have when they come out
-Aaron
Excellent Boobless Ed. I have been waiting for a route like this for ages, and ages. So far there have been no proper CityRail maps whatsoever.
In the meantime, I had started building my own Blue Mountains line Route and I had built from around Kingswood (Not sure why I chose to start from there instead of Penrith) and had only progressed to about up to Warimoo. However I have done signalling, textures, junctions and speed limits all according to real life counterparts.
However after college started again, I knew I would be very busy and indeed I am now... So for the moment I have abandoned my project and was thinking of finishing it 5 months later after some exams.
But now that you are about to release this excellent piece of work, I will probably not bother with finishing my own and instead dedicate to finishing yours off and making it as realistic as I can possibly make it.
So I am looking foward to you uploading it soon mate, I am sure you have done a great job of it. If I ever get around to finishing building and adding touches to your route, I can release it on request.
Regards
Bosch
Ah, JointedRails site doesn't work for me properly and most of the preview pics when getting there payware shows red x, I do know RRMods have some SD50 and GP50's in Black Widow.
And because I can, here is a random pic of an up Healsville
Also I think there's something wrong with the mass in trainz, that small goods was 140 tons.
I think it should be calculated as tare mass and not total mass, she climbed up the hill at 4kph.
-Aaron
Last edited:
Excellent Raichase, I am looking foward to it. Like I said, when I do get it I will give it some proper treatment. I used to live on the Blue Mountains Line (Leura), I have been up and down that route millions of times.
I think the Trainz community does deserve at least one proper CityRail route at last. But like I said in my earlier post, I will only be able to work to my full potential in about 4-5 months after exams.
By the way Raichase, had you guessed that I was VSetFan on RP?
Regards
Bosch
I think the Trainz community does deserve at least one proper CityRail route at last. But like I said in my earlier post, I will only be able to work to my full potential in about 4-5 months after exams.
By the way Raichase, had you guessed that I was VSetFan on RP?
Regards
Bosch
By the way Raichase, had you guessed that I was VSetFan on RP?
If I had known that you were this other identity on Railpage I would not have wasted your time on Railpage telling you about this offer of Blue Mountains material.
http://www.railpage.com.au/f-t11360802-0-asc-s0.htm
Last edited:
Lovers of Queensland Rail National locomotives....
Hi good people, just to let anyone interested in some new additions to the Queensland Rail National fleet know, from this evening onwards the QRN CLP 11 and QRN CLP 13 will be available from the DLS:
Enjoy and cheers :wave:
VinnyBarb
Hi good people, just to let anyone interested in some new additions to the Queensland Rail National fleet know, from this evening onwards the QRN CLP 11 and QRN CLP 13 will be available from the DLS:
Enjoy and cheers :wave:
VinnyBarb
Ghostryder
QDRN CEO
Vinybarb
I found something the QRN CLF/CLPs have not sure about the rest, But when the loco horn is activated for a level crossing the ditch lights flash the LDPs do the same thing. Sorry its bit late but only found out the CLF/CLPs did it.
ghosty
I found something the QRN CLF/CLPs have not sure about the rest, But when the loco horn is activated for a level crossing the ditch lights flash the LDPs do the same thing. Sorry its bit late but only found out the CLF/CLPs did it.
ghosty
Good that I did not know beforehand, it would have been a bugger of script writing to implement this :hehe:.
Another thing I forgot is, the QRN CLP 11 and QRN CLP 13 are in their unique "Eagle" coat of paint scheme which also needed a new approach in applying its side on texture, with all the nooks and cranies to do (part body, part doors, part windows etc.), which the CLP Class has.
These 2 locomotives are for TS09 and for TS10 and are very highly detailed with normal mapping and with 4 aggressive Levels of Detail (LODs), as are their animated bogies too and these current locomotives are somewhat uniquely textured (its 2 sides). Once examining these at very closeup, I am sure you can pick the way I applied this "unique" texture, which one will not find on its texture maps.
First correct answer here will get a free ride on the QRL 11 shown above
.At least it saved me a lot of extra time to apply the textures on their sides.
Cheers
VinnyBarb
Extra Info
I don't know/remember if anyone is doing the 160/260 Suburban units but this would also be something to consider for these units as they do the same thing whenever the country or city klaxons are sounded.
Regards
Glen
I don't know/remember if anyone is doing the 160/260 Suburban units but this would also be something to consider for these units as they do the same thing whenever the country or city klaxons are sounded.
Regards
Glen
Hello
heres some pics that i shot today
also how did like my images last time since no one said anything....
how do get rid of the words under the images too?
[
IMG]http://forums.auran.com/trainz/[/IMG]
4444 and 44205 approch on a train of klv vans meet 4454 and 48103 on a mixed train
[
IMG]http://forums.auran.com/trainz/[/IMG]
4444's nose
[
IMG]http://forums.auran.com/trainz/[/IMG]
4444 seen between two vans
[
IMG]http://forums.auran.com/trainz/[/IMG]
4854 and 48103 leave
[
IMG]http://forums.auran.com/trainz/[/IMG]
4854 and 48103 at a nearby crossing
[
IMG]http://forums.auran.com/trainz/[/IMG]
five hours later 44205 leads the the second train out of the station
heres some pics that i shot today
also how did like my images last time since no one said anything....
how do get rid of the words under the images too?
[
IMG]http://forums.auran.com/trainz/[/IMG]4444 and 44205 approch on a train of klv vans meet 4454 and 48103 on a mixed train
[
IMG]http://forums.auran.com/trainz/[/IMG]4444's nose
[
IMG]http://forums.auran.com/trainz/[/IMG]4444 seen between two vans
[
IMG]http://forums.auran.com/trainz/[/IMG]4854 and 48103 leave
[
IMG]http://forums.auran.com/trainz/[/IMG]4854 and 48103 at a nearby crossing
[
IMG]http://forums.auran.com/trainz/[/IMG]five hours later 44205 leads the the second train out of the station
Last edited:
there is someone oing the 160/260 series, its dasith75 if you want to try to get him to incorporate this maybe you should drop him a pm about it but thats awesome news vinny, just wait till they get repainted in the new scheme
Most locomotives running around today have been modified in this way as it's an added safety feature for level crossings. All of the the ARG fleet had this fitted. Quite often though it plays up and either one or both ditch lights remain on instead of flashing, so while it's an interesting feature on a model I suppose it's not really that noticeable if it's too hard to script. It would be nice though
Railwayz