Mitch, i can answer the second question for you. I believe the wagons are NHVF coal wagons by Davido. <kuid:60723:100071>
Hope this helps,
Matt.
Australian screenshots
- Thread starter cook
- Start date
Mitch, i can answer the second question for you. I believe the wagons are NHVF coal wagons by Davido. <kuid:60723:100071>
Hope this helps,
Matt.
Thanks Fella's
Mitch if you grab absolutely everything from here for Trs http://www.greenery.name/mstsgcz/mstsgd.htm?trainz,1
Then you will have the track and the ballast textures as well mate,The route is Lar's Route Ida Terminal which ya can grab here http://gaurc.us/forum/index.php its free to register and theres loads of great stuff there to grab for nicks.The Hoppers belong to Davido they are the NSW FreightCorp NHVF Coal Hopper on the DLS ( Grab all of his stuff too ).
Cheers Mick.
Mitch if you grab absolutely everything from here for Trs http://www.greenery.name/mstsgcz/mstsgd.htm?trainz,1
Then you will have the track and the ballast textures as well mate,The route is Lar's Route Ida Terminal which ya can grab here http://gaurc.us/forum/index.php its free to register and theres loads of great stuff there to grab for nicks.The Hoppers belong to Davido they are the NSW FreightCorp NHVF Coal Hopper on the DLS ( Grab all of his stuff too ).
Cheers Mick.
D9007_Pinza
Murringo's shed foreman
@ ad602000: Pete, Cootamundra, Harden and Junee are all Whitton era stations, opened between 1877 and 1878 and as such, are not part of the standardised "range" of station buildings, etc developed by the NSWGR post 1900.
@ jackford2009: try these three pages:
Harden: http://www.nswrail.net/locations/show.php?name=NSW:Harden&line=NSW:main_south:0
Cootamundra: http://www.nswrail.net/locations/show.php?name=NSW:Cootamundra&line=NSW:main_south:0
Junee: http://www.nswrail.net/locations/show.php?name=NSW:Junee&line=NSW:main_south:0
Cheers, Evan.
@ jackford2009: try these three pages:
Harden: http://www.nswrail.net/locations/show.php?name=NSW:Harden&line=NSW:main_south:0
Cootamundra: http://www.nswrail.net/locations/show.php?name=NSW:Cootamundra&line=NSW:main_south:0
Junee: http://www.nswrail.net/locations/show.php?name=NSW:Junee&line=NSW:main_south:0
Cheers, Evan.
railway_simulation
Railway simulation aussie
harden to Goulburn route joining on the the southlines four route
any one knowing that if theres the missing link getting built i know the city rail one if on its way but where abouts on the southline dose it end i wanna mach it with this one iam making harden to gouburn route needed i want to make all the australia railways all together linked up
any one knowing that if theres the missing link getting built i know the city rail one if on its way but where abouts on the southline dose it end i wanna mach it with this one iam making harden to gouburn route needed i want to make all the australia railways all together linked up
railway_simulation
Railway simulation aussie
thanks mate now i can fiully fix tumut branch with this thanks thats the later thing i need to get the main line south fixed up if u come across any more let me know will ya thanks mate cheers
SARRailways
Member
NSW and VR Loco Class Numbers
Hey everybody :wave:
I am having trouble with getting the correct Class Numbers with the VR and NSW Locos. Some sites say one, another site, different. Please help me in getting the loco class numbers correct. And congratulations on everyone for the screenshots. Nicely done.
Thanks, SARRailways
Hey everybody :wave:
I am having trouble with getting the correct Class Numbers with the VR and NSW Locos. Some sites say one, another site, different. Please help me in getting the loco class numbers correct. And congratulations on everyone for the screenshots. Nicely done.
Thanks, SARRailways
Hey everybody :wave:
I am having trouble with getting the correct Class Numbers with the VR and NSW Locos. Some sites say one, another site, different. Please help me in getting the loco class numbers correct. And congratulations on everyone for the screenshots. Nicely done.
Thanks, SARRailways
Which NSW locos are you trying to find class numbers for? The little details help, ya know?
railway_simulation
Railway simulation aussie
whens the cityrail 2010 be ready ?
dose any one know when the cityrail 2010 route be out and ready for down load or know any way of having a sticky beak at the route on how its going
dose any one know when the cityrail 2010 route be out and ready for down load or know any way of having a sticky beak at the route on how its going
D9007_Pinza
Murringo's shed foreman
NSWGR loco No. series
Luckily, I have a copy of Leon Oberg's book "Locomotives of Australia" at hand. Of the NSW and Victorian classes I can recall are in Trainz, their number series are listed below:
NSWGR:
Z19 0-6-0: 1901-1960
Z20 2-6-4T: 2001-2033
C30 4-6-4T: 3001-3145*
C32 4-6-0: 3201-3391
C35 4-6-0: 3501-3535
C36 4-6-0: 3601-3675
C38 4-6-2: 3801-3830
D50 2-8-0: 5001-5280
D53 2-8-0: 5301-5490
D55 2-8-0: 5501-5620
D57 4-8-2: 5701-5725
D58 4-8-2: 5801-5813
D59 2-8-2: 5901-5920
AD60 4-8-4+4-8-4: 6001-6042
40 A1A-A1A: 4001-4020
41 Bo-Bo: 4101-4110
42 Co-Co: 4201-4206
422 Co-Co: 42201-42220
43 Co-Co: 4301-4306
44 Co-Co: 4401-44100
442 Co-Co: 44201-44240
45 Co-Co: 4501-4540
46 Co-Co: 4601-4640
47 Co-Co: 4701-4720
48 Co-Co: 4801-48165
73 Bo-Bo: 7301-7350
VR:
A2 4-6-0: 816-939 (Stephenson valve gear), 940-999 (Walschaert's valve gear)
B Co-Co: 60-85
DDE/D4 4-6-2T: 250-287
G 2-6-0+0-6-2 (N.G.): 41-42
H 4-8-4: 220
H Bo-Bo: 1-5
J 2-8-0: 500-559
K 2-8-0: 140-192
N 2-8-0: 430-432, 450-499
Na 2-6-2T (N.G.): 1A-17A
R 4-6-4: 700-769
S 4-6-2: 300-303
S Co-Co: 300-317
T Bo-Bo 320-346, 413 (series 1), 347-359 (series 2), 361-366 (series 3), 360, 367-412 (Series 4)
X Co-Co: 31-54
Hope this helps,
Cheers, Evan
Luckily, I have a copy of Leon Oberg's book "Locomotives of Australia" at hand. Of the NSW and Victorian classes I can recall are in Trainz, their number series are listed below:
NSWGR:
Z19 0-6-0: 1901-1960
Z20 2-6-4T: 2001-2033
C30 4-6-4T: 3001-3145*
C32 4-6-0: 3201-3391
C35 4-6-0: 3501-3535
C36 4-6-0: 3601-3675
C38 4-6-2: 3801-3830
D50 2-8-0: 5001-5280
D53 2-8-0: 5301-5490
D55 2-8-0: 5501-5620
D57 4-8-2: 5701-5725
D58 4-8-2: 5801-5813
D59 2-8-2: 5901-5920
AD60 4-8-4+4-8-4: 6001-6042
40 A1A-A1A: 4001-4020
41 Bo-Bo: 4101-4110
42 Co-Co: 4201-4206
422 Co-Co: 42201-42220
43 Co-Co: 4301-4306
44 Co-Co: 4401-44100
442 Co-Co: 44201-44240
45 Co-Co: 4501-4540
46 Co-Co: 4601-4640
47 Co-Co: 4701-4720
48 Co-Co: 4801-48165
73 Bo-Bo: 7301-7350
VR:
A2 4-6-0: 816-939 (Stephenson valve gear), 940-999 (Walschaert's valve gear)
B Co-Co: 60-85
DDE/D4 4-6-2T: 250-287
G 2-6-0+0-6-2 (N.G.): 41-42
H 4-8-4: 220
H Bo-Bo: 1-5
J 2-8-0: 500-559
K 2-8-0: 140-192
N 2-8-0: 430-432, 450-499
Na 2-6-2T (N.G.): 1A-17A
R 4-6-4: 700-769
S 4-6-2: 300-303
S Co-Co: 300-317
T Bo-Bo 320-346, 413 (series 1), 347-359 (series 2), 361-366 (series 3), 360, 367-412 (Series 4)
X Co-Co: 31-54
Hope this helps,
Cheers, Evan
Here is the blog for the project, though there has not been a new post in over a year now so I am seriously doubting that the project is still in progress.
http://www.dateck.au.com/cityrailtrainzblog/cityrailblog.html
As much as I (and I'm sure many other NSW Trainz fans) would love to see this project available for Trainz it was simply too big of a project for one person. Not only was the creator building the routes, he was also modelling specific buildings/scenery models for it as well, so it was definitely too big for a solo project.
Perhaps one day a group of trainzers can join forces and create a project of this scope, but it would certainly take a lot of work to complete.
Cheers,
Matt
well those three buildings are a problem, although I think Junee is similar to Hay station, which I made many years ago. If you had diagrams brilliant , easy done. failing that, I would need photos of all aspects of the buildings and dimensions available before I could have a go at them.
cheers
pete
cheers
pete
railway_simulation
Railway simulation aussie
hey
what about tumut or gundagai stations or even cootamundra ?
what about tumut or gundagai stations or even cootamundra ?
Ghostryder
QDRN CEO
jackford
its nice to see your keen and eager but most content creators do need some details to work on to get the item accurate. Pete does good work but as do all the aussie creators that show off items, having dealt with creators they need some basic things like dimensions pictures so they can size up the project, if you want it right they need those things, one last thing i have found works here is patience good things come to those that wait if you upset or pressure a creator they may not make the item you need and they may stop creating and sharing their work. Maybe you can contact pete in private and work with him on what he needs to make the items you require work.
cheers
ghosty
its nice to see your keen and eager but most content creators do need some details to work on to get the item accurate. Pete does good work but as do all the aussie creators that show off items, having dealt with creators they need some basic things like dimensions pictures so they can size up the project, if you want it right they need those things, one last thing i have found works here is patience good things come to those that wait if you upset or pressure a creator they may not make the item you need and they may stop creating and sharing their work. Maybe you can contact pete in private and work with him on what he needs to make the items you require work.
cheers
ghosty
railway_simulation
Railway simulation aussie
thanks mate
yeah for sure if any one needs any help just ask me ill work hard with u guys to help u build this items ok explain to me what u need and ill track them things down fast
yeah for sure if any one needs any help just ask me ill work hard with u guys to help u build this items ok explain to me what u need and ill track them things down fast
SARRailways
Member
Thanks for the list. Appreciate it mate
Any news if Davido is realeasing new content???Thanks, SARRailways
You mean he hasn't done enough already?
No, no he definitely has not! His work shall not be considered anywhere near complete until he releases a.... Well, i think you can see where I'm heading.
Seriously though, can't people exercise some patience? Davido, along with all the other brilliant Aussie content creators, do have lives outside Trainz (I hope!) They will release content when when they are ready, not when you say Gimme!
Matt.
SARRailways
Member
No, no he definitely has not! His work shall not be considered anywhere near complete until he releases a.... Well, i think you can see where I'm heading.
Seriously though, can't people exercise some patience? Davido, along with all the other brilliant Aussie content creators, do have lives outside Trainz (I hope!) They will release content when when they are ready, not when you say Gimme!
Matt.
Yes I understand that, I have downloaded all his NSW content and am hoping for more in the next few months. The texturing I find is one of the best bits bout his creations. Any news on VinnyBarb and his TransAdelaide 3000/3100 and 2000/2100 class units????
Thanks, SARRailways