Australian screenshots
- Thread starter cook
- Start date
From the cab of TS2009 on an up train through Tarrawarra
http://zecrail.fotopic.net/p56120200.html
http://zecrail.fotopic.net/p56120201.html
http://zecrail.fotopic.net/p56120203.html
Zec
http://zecrail.fotopic.net/p56120200.html
http://zecrail.fotopic.net/p56120201.html
http://zecrail.fotopic.net/p56120203.html
Zec
The secret has hatched & so I could not resist...
[img=http://img230.imageshack.us/img230/5017/4454yg1.th.jpg]
Early stage's of a Bradken Freight Bogey.
:wave:
[img=http://img230.imageshack.us/img230/5017/4454yg1.th.jpg]
Early stage's of a Bradken Freight Bogey.
:wave:
Nice mate 
One suggestion. Try making the entire wheel out of a 'line', then use the lathe tool .That way you get the correct profile for the wheel, and low polys (I would suggest about 3 segments for the dish, thats what I used on my disc wheel IIRC).
Still, very nice! Great to see more bogies being made
Zec
One suggestion. Try making the entire wheel out of a 'line', then use the lathe tool .That way you get the correct profile for the wheel, and low polys (I would suggest about 3 segments for the dish, thats what I used on my disc wheel IIRC).
Still, very nice! Great to see more bogies being made
Zec
Nice mate
One suggestion. Try making the entire wheel out of a 'line', then use the lathe tool .That way you get the correct profile for the wheel, and low polys (I would suggest about 3 segments for the dish, thats what I used on my disc wheel IIRC).
Still, very nice! Great to see more bogies being made
Zec
That's a reasonable suggestion there Zec, I will have a crack at the method you speak of and compare the difference.
Cheers
Hey Chuff, hope these will be 3foot 6 stuff, looking great.That's a reasonable suggestion there Zec, I will have a crack at the method you speak of and compare the difference.
Cheers
Been doing more work on it. The nearby stations would only need a colour change or roof extension! Good for anyone doing stations on the East Hills line!
Need to fix that roof section, doors, windows and the wheelchar ramp.
They'd also be good if someone was to embark on making the Bankstown line. Some interesting content there Deadly,looking forward to some of the stuff you have coming up
Howdy Bruce, have been thinking the same thing myself.
3Foot 6Inch would be standard QLD gauge now wouldn't it ??????????
Ghostryder
QDRN CEO
from another project in the making.
Adamstown via Fernleigh
5270 leads it loaded coal train up grade between Redhead and Whitebridge.
5270 leads it train through Dudley Junction between Whitebridge and kahibah bound for BHP exchange sidings at Port Waratah.
an unknown standard goods loco leads a south bound empty coal train through Dudley Junction.
Thanks to ImageShack for Free Image Hosting
cheers
Ghosty
Adamstown via Fernleigh
5270 leads it loaded coal train up grade between Redhead and Whitebridge.
5270 leads it train through Dudley Junction between Whitebridge and kahibah bound for BHP exchange sidings at Port Waratah.
an unknown standard goods loco leads a south bound empty coal train through Dudley Junction.
Thanks to ImageShack for Free Image Hosting
cheers
Ghosty
Jubo_Classics
New member
Where's Burwood Colliery?
Ghostryder
QDRN CEO
would be right of shot to the second shot and left of shot in the last shot. if thats what you mean, for those uncertain it was located between whitebridge and kahibah, and is now a housing estate.
cheers
ghosty
cheers
ghosty
Marvellous angles there mules, you've certainly got the patience to be classified as a route creating perfectionist, just don't go smoking your screenies!!!
Whilst not strictly a screen shot :hehe:
I just slaved away for 10 hours resetting the site after 12 months of rather tiresome breakdowns, possibly due to building the site in Publisher ugh!!
Most of the links were down too, and I had to reload images that I had stored on DvD's which took the longest.
Anyway it is up again but I still need your help, once more??
Can people send me plans and pictures (projects?) that you would like to share with other trainzers? I will upgrade quickly if you send them now, some of you have promised as long as it took me to fix the site :wave:
Anyway need West Australian and Tasmanian plans, if you have them. I have been promised a stack of QR stuff.
If you see a loco drawing in a mag, please scan and send it along
Cheers
Rod
ps VicTrainz is still down so click on the RHS little red x above post reply and you will navigate to Trainz Planz
Last edited: