Australian screenshots

[SARRailways]

Mornin' gents

I have downloaded some of ad602000s SAR OB Wagons for 2012 and it is telling me that the mesh is out of date and that it needs to be changed. How exactly do I do this? Any help is appreciated. Also I'm loving the screenies! Good work everyone

 

[ad602000]

are they pm or IM if IM I dont know what the problem is if PM you could use pevsofts pmtoim program either that or try changing the version in the config

 

[TheWaluigiKing]

G'day everyone here's another shot from me NSWGR #3265 #3235 and #3801 take a rest

also my birthday is a week away from now i won't be the forums for my Bday because i will be in Melbourne

 

[hbl]

A few shots of a small 1 (maybe 2) board module I'm working on. Designed to be added onto an existing route, or a new route made to go with it.

After bringing in the morning passenger service to Condamine station, C16 38 takes water in the headshunt.

Turning the loco using the triangle also provides the ability to pick up a rake of sheep wagons from the stockyards. Here No. 38 is shunting the wagons onto a rake of cattle wagons to make up the return service.

No. 38 collects the passenger coaches and adds them to the head of the train.

With a blast of the whistle No. 38 pulls away with the morning return train.

 

[targanon]

very nice.
I like the story line.

but you should have put all the live stock in front of the passengers... give them a nice country experience with the small of McDonalds before its turned into plastic food..

 

[SARRailways]

are they pm or IM if IM I dont know what the problem is if PM you could use pevsofts pmtoim program either that or try changing the version in the config

Warning: This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Warning: Progressive meshes are no longer supported by Trainz. Though these meshes may work in Trainz, it is recommended that you switch to a LOD mesh.
Warning: Progressive meshes are no longer supported by Trainz. Though these meshes may work in Trainz, it is recommended that you switch to a LOD mesh.
Error: Texture 'load_mesh/black.texture' is missing or could not be loaded for mesh 'load_mesh\load_attachment_1.im'.


It comes up with this, and for some of the other SAR/VR items, mainly the wagons and your wagons, say there are a number of items no longer on the download station.

 

[narrowgauge]

You can ignore the warnings.

Regarding the error, look for a black.texture file in one of the other VR/SAR stock, it is probably used there.

When yo have this sort of problem always quote the KUID, it helps with sorting out your problems

Peter

 

[ad602000]

@sarrail I have had a look at these and they have IM meshes so I think the PM message is not applicable. The black texture message ??/ I never used a black texture on the model. However, it might have something to do with the load, which none of were made by me. When you searched the dls for these products, did you tick the 2004 box as this model is quiet old, pre my victrainz days in fact. All I can suggest is that you jot down the kuids ofr the products and contact the authors. I think I have them on my machine but would not be willing to send them over without the authors approval, as they still own them. PM me if you have any success with finding the authors. The other thing you could try is to look for a similar or same sized load and try replacing kuids in the config. I cant remember what the loads were. If these were 4 wheelers try looking for some small loads I created for the NSW wagons under my 63971 kuid

cheers
Pete

 

[SARRailways]

You can ignore the warnings.

Regarding the error, look for a black.texture file in one of the other VR/SAR stock, it is probably used there.

When yo have this sort of problem always quote the KUID, it helps with sorting out your problems

Peter

I'll have a look, thanks for your help

 

[targanon]

A couple of Snaps from my PoB had a suggestion to break the waters edge a little, finally got around to doing it.. Just doing house work now I feel theend is near.. I have sent it off to a couple of buds to test.. getting nice feedback.. from the guys..

once I get the thumbs up for them I'll push it out the list of testers that put their hands up a little while ago..

 

[kentith45]

A couple of Snaps from my PoB had a suggestion to break the waters edge a little, finally got around to doing it.. Just doing house work now I feel theend is near.. I have sent it off to a couple of buds to test.. getting nice feedback.. from the guys..
once I get the thumbs up for them I'll push it out the list of testers that put their hands up a little while ago..

Looking fantastic mate! :clap:

- Kent

 

[davo2222]

lookin good there Targanon

 

[targanon]

http://youtu.be/Q-82NVAikGQ

just the first part of a 2 part vid big file so don't say I didn't warn you ..

the second vid will be at the this link when its finished uploading

http://youtu.be/Oe1AWWyPXrs


I hope you enjoy them....

 

[scratchy]

Cool shots all, havnt posted in this thread recently, but if i get a bit more done on this route I might be back soon Does anyone have grade charts for the great southern line between mittagong and bundanoon?

 

[SARRailways]

@sarrail I have had a look at these and they have IM meshes so I think the PM message is not applicable. The black texture message ??/ I never used a black texture on the model. However, it might have something to do with the load, which none of were made by me. When you searched the dls for these products, did you tick the 2004 box as this model is quiet old, pre my victrainz days in fact. All I can suggest is that you jot down the kuids ofr the products and contact the authors. I think I have them on my machine but would not be willing to send them over without the authors approval, as they still own them. PM me if you have any success with finding the authors. The other thing you could try is to look for a similar or same sized load and try replacing kuids in the config. I cant remember what the loads were. If these were 4 wheelers try looking for some small loads I created for the NSW wagons under my 63971 kuid

cheers
Pete

I don't know why, but the VR ELX Gondola loaded and SAR OB Gondola loaded work fine. The VR ELX Gondola empty and SAR OB Gondola empty won't work. It has the same issue as the smaller wagons.

 

[Muliebuck]

very nice.
I like the story line.

but you should have put all the live stock in front of the passengers... give them a nice country experience with the small of McDonalds before its turned into plastic food..

Thanks very much for the well wanted laugh, that really made my day that one, pure gold

 

[seeseeme]

I don't know why, but the VR ELX Gondola loaded and SAR OB Gondola loaded work fine. The VR ELX Gondola empty and SAR OB Gondola empty won't work. It has the same issue as the smaller wagons.

SARRailways,

I am not exactly sure what you mean by the empty version "won't work". Do you mean they are still showing the errors you reported before ??
I am also not sure which version of trainz you are using these wagons in but I think in TS12 as one of the Warnings refers to the build-number. Also, one of them is built-in in 2010.

Anyway, I just looked at them for you in TS12 and fixed the errors that showed up (the same ones you mentioned). I tested them in TS12 and they looked OK and so did the loads for General Goods.

Let me know what Trainz version you are trying to get them to work in and what problems you are now having.

The missing Black Texture is kind-of there, well there is one I used :hehe:

If Pete has no problems, I can forward you the correct content.

Craig

 

[SARRailways]

SARRailways,

I am not exactly sure what you mean by the empty version "won't work". Do you mean they are still showing the errors you reported before ??
I am also not sure which version of trainz you are using these wagons in but I think in TS12 as one of the Warnings refers to the build-number. Also, one of them is built-in in 2010.

Anyway, I just looked at them for you in TS12 and fixed the errors that showed up (the same ones you mentioned). I tested them in TS12 and they looked OK and so did the loads for General Goods.

Let me know what Trainz version you are trying to get them to work in and what problems you are now having.

The missing Black Texture is kind-of there, well there is one I used :hehe:

If Pete has no problems, I can forward you the correct content.

Craig

The empty version of the ELX and OB comes up in the DLS asfaulty or obsolete. I’m using TRS 2012 and only a few items won’t downloadproperly. I have some content from Alyx who made the made the SAR OB Wagons andthey work fine. It’s just the empty versions that have something wrong.

 

[seeseeme]

Warning: This asset uses an obsolete trainz-build number. Trainz-build numbers below 2.7 are no longer supported.
Warning: Progressive meshes are no longer supported by Trainz. Though these meshes may work in Trainz, it is recommended that you switch to a LOD mesh.
Warning: Progressive meshes are no longer supported by Trainz. Though these meshes may work in Trainz, it is recommended that you switch to a LOD mesh.
Error: Texture 'load_mesh/black.texture' is missing or could not be loaded for mesh 'load_mesh\load_attachment_1.im'.


It comes up with this, and for some of the other SAR/VR items, mainly the wagons and your wagons, say there are a number of items no longer on the download station.

I will quote your previous post to show the faults.

1. In TS12 the Trainz-build must be 2.9 or higher (I do not think it can be lower). In many cases, including these ones, you can open the Config File and change the Tag "Trainz-build" to 2.9

2. The PM mesh files need to be changed to IM mesh files using PEV pm2im program. There are 2 PM files in different folders that need to be converted.

3. For the missing "black.texture" files I found in the "shadow" folder a black texture TGA file and and black.texture file so I copied those to the folder "load_mesh" and that worked.

4. This is something that only shows as a fault AFTER you have fixed the other problems and that is you are told that the TAG "icon0" is not known. Just delete the whole line and everything is OK.

That's about it. If your still having problems and the creator/s let me I will forward you the corrected versions.

Let me know if you have any other items showing as faulty/warning and I will have a look at them as well.

Craig

 

[SARRailways]

I will quote your previous post to show the faults.

1. In TS12 the Trainz-build must be 2.9 or higher (I do not think it can be lower). In many cases, including these ones, you can open the Config File and change the Tag "Trainz-build" to 2.9

2. The PM mesh files need to be changed to IM mesh files using PEV pm2im program. There are 2 PM files in different folders that need to be converted.

3. For the missing "black.texture" files I found in the "shadow" folder a black texture TGA file and and black.texture file so I copied those to the folder "load_mesh" and that worked.

4. This is something that only shows as a fault AFTER you have fixed the other problems and that is you are told that the TAG "icon0" is not known. Just delete the whole line and everything is OK.

That's about it. If your still having problems and the creator/s let me I will forward you the corrected versions.

Let me know if you have any other items showing as faulty/warning and I will have a look at them as well.

Craig

I'll have a crack at changing it