Australian screenshots

Well, I downloaded them and found that the Tangara power cars work fine (although the top of the cab windows at the front seem to have some glitched textures), but the trailers are broken, same with the S and C sets. The K sets sadly don't work at all though. However, I haven't checked them for errors in CMP yet, only having viewed, or attempted to view, them in Railyard.

Still, thanks for releasing these Bear (and to ad620000 for making the original meshes too) - the Tangaras especially (I first remember riding them back in 1991 on my first visit to Sydney when I was 12. They were unlike anything I'd ever ridden on or seen, and to a little kid, they were magical. It's just a shame that on my last visit to Sydney in late 2004 they'd seem to have become very dirty and rundown, with 'sticking' doors, grubby interiors and the ever-present problem of vandalism.)

Either way, thank you so much both again for these models Bear and Pete, they're still very much appreciated. :)
 
Steve, with the C/S/K sets, open the asset for edit, open the config, find <kuid2:1854:1748:1>, delete all references, save and then commit the changes. They should all show up in surveyor from that point. There is no need to substitute any other kuid for the redundant one.

Also, while on the subject of errors, has anyone else experienced this:



The above view is what resulted after swapping cabs, at the end of a run to heard back in the opposite direction. Rotating the view 180 degrees with the arrow keys does show the cab, however there is no way to control the train from that end. This happens irrespective of whether or not a driver is assigned to the power car.

Edit: sorry forgot to mention, this is the Tangara, and the issue exists on all versions.

Matt.
 
Last edited:
K-Sets in game:


Looks good, however it should said i get the following error on the trailer car:

once again no idea what is going on - superstud is the AJS scrpit which is giving you an error its used for the auto numbering that all the stuff the sparkes use - you on you own with this one
 
Hi everybody I will do the config fixes for the C K and S sets ASAP - due to the current problems with the DLS it may take up to 5 Days for the fixed units to pop up.

Will fix the T set errors as well See above notes.

PLEASE NOTE - I have only tested and run these units in TS12 I am only setting them up to run in TS12 - if you using them in any other version of trainz and getting problems your on your own
 
once again no idea what is going on - superstud is the AJS scrpit which is giving you an error its used for the auto numbering that all the stuff the sparkes use - you on you own with this one

No probs. Just bringing it to you attention. As you asy, it is just the ARN that's affected. Other than that one error they run fine.

Matt.
 
First batch of fixes


File 1:
File Name: NSW Cityrail C Set Power.cdp
http://www.sendspace.com/file/csyzdr
File 2:
File Name: NSW Cityrail C Set Trailer.cdp
File Size: 1.7 MB
http://www.sendspace.com/file/tn2pnu
File 3:
File Name: NSW Cityrail K Set Power.cdp
File Size: 1.3 MB
http://www.sendspace.com/file/izm1d5
File 4:
File Name: NSW Cityrail K Set Trailer.cdp
File Size: 1.2 MB
http://www.sendspace.com/file/dudonn
File 5:
File Name: NSW Cityrail S Set Power.cdp
File Size: 1.3 MB
http://www.sendspace.com/file/0i52vj
File 6:
File Name: NSW Cityrail S Set Trailer.cdp
File Size: 1.7 MB
http://www.sendspace.com/file/bx20m5
 
Last edited:
^^

Might want to omit the "delete" link from your post. :)

[Edit]: NVM, you've done it whilst I was replying. haha
 
Last edited:
Probably a good idea Bearcat to maybe get your self a couple of private Beta Tester's to give your Content a good going over in all version's before release this way you would know what it work's in and what it wont, Plus it would save your finger's from all the typing you've done all day trying to get it all sorted :hehe:.
Cheers Mick.:D
 
Hi all,

My 20 ft and 40 ft containers are now finally complete, I will upload to the DLS in the near future.

containers4.jpg


containers3.jpg


containers2.jpg


containers1.jpg


All will be available as individual scenery items as well as a loadable product.


Cheers, :)


Matt
 
Probably a good idea Bearcat to maybe get your self a couple of private Beta Tester's to give your Content a good going over in all version's before release this way you would know what it work's in and what it wont, Plus it would save your finger's from all the typing you've done all day trying to get it all sorted :hehe:.
Cheers Mick.:D
I do have a private beta test team - its just you guys do not know you are my test team -
you would be amazed how few a number of people down load the files that I post here - but the feed back is great is great .

I am amazed how many people download content from the DLS - and then never report and error.
 
My 20 ft and 40 ft containers are now finally complete, I will upload to the DLS in the near future
Awesome work Matt, I'm eagerly awaiting these and the masterpiece they are sitting on :udrool:.

I do have a private beta test team - its just you guys do not know you are my test team
Hey i use the them too :hehe:.
Cheers Mick.:)
 
#NSWGR_46Class




Loving the releases of late!
Some feedback;
The body is all good but it could be just me however, the textures seem to be very one-toned or plain. I was comparing the S Sets to the previous ones on the DLS and the textures are what they seem to be lacking.

Just my opinion but keep up the good work!



Cheers
Michael
 
These are low detail low poly units and are not meant to be a replacement for the other S sets that are hi poly and hi detail - there designed to run and not tax your machine.

if you do not like them - do not down load them.




#NSWGR_46Class




Loving the releases of late!
Some feedback;
The body is all good but it could be just me however, the textures seem to be very one-toned or plain. I was comparing the S Sets to the previous ones on the DLS and the textures are what they seem to be lacking.

Just my opinion but keep up the good work!



Cheers
Michael
 
MORE FIXED FILES

File 1:
File Name: NSW Cityrail Tangara Control Car - Closed Coupler.cdp
File Size: 1022.7 KB
http://www.sendspace.com/file/smwrhi

File 2:
File Name: NSW Cityrail Tangara Control Car - Open Coupler.cdp
File Size: 1 MB
http://www.sendspace.com/file/d93sjw

File 3:
File Name: NSW Cityrail Tangara Yellow Control Car - Closed Coupler.cdp
File Size: 1.1 MB
http://www.sendspace.com/file/conmix

File 4:
File Name: NSW Cityrail Tangara Yellow Control Car - Open Coupler.cdp
File Size: 1.1 MB
http://www.sendspace.com/file/xev7ts

File 5:
File Name: NSWGR CPH Railmotor.cdp
File Size: 2.3 MB
http://www.sendspace.com/file/e9aymi
 
Last edited:
Fixed the issue I had with the K set trailer- I just deleted and reinstalled it. No idea why, but that cured it.

Thanks for all your efforts into getting these into Trainz for us to play with. Much appreciated.:cool:

Matt.
 
Back
Top