Martinvk , you"ve caught me making a howler! What I meant was to build up a Yard of the ones you actually want to use.You don"t need to label them since the idea is to have them there so you can click "Get Object" so you can get them repeatedly without having to Search.Anyways heres another Tip:- When you want to use AI to couple a Locomotive to a Train/Consist in a Siding the Locomotive will drive at Line Speed as far as the points for the siding and then at 1 MPH until it reaches the Train.This can be tiresome if the siding is very long , SO what you do is 1) decide on a place (call it the Coupling Point) where the last vehicle in the Train/Consist will stand, this being the vehicle the Loco will couple to.About 5 yards from the Coupling Point pace a Signal Invisible on the track so that the AI Driver can see it as he approaches the Train.Then place an Invisible 5 0r 10 MPH Speed Limit on the entry to the siding , and (leaving the Siding )a Speed Limit for whatever your Line Speed is.Now when the Loco enters the Siding it will drive at 5 or 10 MPH till it reaches the Signal Invisible (a few yards from the Train) and slow down to 1 MPH before coupling.This works like a charm for me.
Last edited: