Trainz Forge Forney's are faulty (missing/faulty sounds)

[BraselC5048]

I just downloaded and installed trainboi1's 2ft gauge Forneys from Trainz Forge, and it turns out that those in the linked file are faulty as downloaded. More specifically:
- <kuid:648132:107530> : VE101: The file 'dynamo.wav' does not exist.
- <kuid:648132:107530> : VE101: The file 'dynamo_load.wav' does not exist.
- <kuid:648132:107530> : VE102: Failed to load sound file 'air-brake-application-hiss-loop.wav', please ensure this is a valid wav file.

I'm assuming there's a fixed download somewhere? Or do I need to find said sound files in other locomotives of his and copy them over?

 

[Forester1]

I can't find those on their site, but they do have a "Contact Us" link under "Team"

 

[BraselC5048]

I can't find those on their site, but they do have a "Contact Us" link under "Team"

They aren't separate files, they're supposed to be in the locomotive's own main folder, but got left out somehow.

 

[Forester1]

Right, but I could not find the 2ft gauge forneys.

 

[JAGG]

Look for Baldwin 10-18 1/4 Cs

 

[p-dehnert]

The sound files seem to exist, but use a format unsupported by Trainz. I have converted (using Audacity) 'air-brake-application-hiss-loop.wav' to Microsoft WAV PCM 8bit unsigned (rate unchanged), and the sound has been accepted by Trainz. The same procedure should fix the other sounds.

Peter

 

[BraselC5048]

The sound files seem to exist, but use a format unsupported by Trainz. I have converted (using Audacity) 'air-brake-application-hiss-loop.wav' to Microsoft WAV PCM 8bit unsigned (rate unchanged), and the sound has been accepted by Trainz. The same procedure should fix the other sounds.

Peter

Actually... looking at the 1930's version, <kuid:648132:107538>, 'dynamo.wav' and 'dynamo_load.wav' flat out aren't there. Not wrong format, simply not in the asset.

 

[JAGG]

Generally: if present, 'air-brake-application-hiss-loop.wav' has to be converted & if missing, dynamo.wav' and 'dynamo_load.wav have to be added from some other locos (I have checked that these are present there).

 

[p-dehnert]

The sound files dynamo.wav and dynamo_load.wav are required by these 3 locomotives

<kuid:648132:107527> B&SR 8 As Built
<kuid:648132:107538> B&HR 7 - 1930s
<kuid:648132:107530> B&HR 8 - 1930s

All locomotives need the fixed air-brake-application-hiss-loop.wav (fix one and copy).
The 2 dynamo files could be copied from the C&HR NG 4-6-0, available at Trainz-Forge (NG Steam).

Peter

 

[BraselC5048]

The sound files dynamo.wav and dynamo_load.wav are required by these 3 locomotives

All locomotives need the fixed air-brake-application-hiss-loop.wav (fix one and copy).
The 2 dynamo files could be copied from the C&HR NG 4-6-0, available at Trainz-Forge (NG Steam).

Peter

Thanks! I simply replaced the faulty sound file with the one with the same name in the locomotive you suggested though, which is almost certainly identical. Not showing any errors now.