Plate girder road bridge...

[chairman]

Hi...

I`m looking for a road bridge similar to this...
http://www.gnsra.org.uk/gnsra_gallery_stations_157.htm

I have found a rail version which I can `kit bash` with a road on top of the rails, but as there are quite a few on the route I`m building so I`m trying to get as much variation in this type of bridge as I can get.
Even different `side plates` would be an advantage as I could probably build using various other items.

Thanks in advance for any help given.

chairman

 

[marky7890]

Here is one I use:

Plate_Bridge_Road
KUID:84609:32170

Mark

 

[chairman]

@marky7890,

Thankyou for that KUID, I had seen it an will probably use this item for one of the bridges in question, but if you notice the brickwork on the ends of the plate section of the bridge (spline) are rather large (compared to the bridge in the link).
These type of bridges seem (to me at least) to be peculiar to the Scottish region of BR. Of course the simple solution would be to download every type of bridge from the DLS.... but at the moment I seem to be downloading a lot, 75% of which I`ll probably never use.

Many thanks for your help.

chairman

 

[rjhowie]

Not far of from what you want - Beam Bridge by Tafweb 11942:38120. He has a single and double track versions.

 

[rjhowie]

Oops, sorry have given you a rail bridge. Apologies!

 

[ANDYDJ]

olderbrother@earthlink.net

This is not about bridges but I have a problem that I have not been able to solve. In Survayor I am supposed to be able to assign a driver to the engine. When Ido this all that comes up on the edit screen is a blank properties screen and no driver. Can anyone help me.

 

[ANDYDJ]

Oops, sorry have given you a rail bridge. Apologies!

Did anyone see the question I posted?? Am new to this

 

[H222]

Please be a little patient, you have left it for 3 minutes
And in what exactly do you mean, can you please be a little clearer?
Jamie

 

[chairman]

@rjhowie2...

Thankyou for answering, that is in fact the bridge I have used. With much head scratching and cursing (and many hours work) I have managed to kit-bash a reasonable effort.

I was thinking if nothing else is suggested then I could used this bridge a few times, the only difference being the brickwork around the bridge supports / embankments.

Many thanks.

chairman

 

[chairman]

Hi...

Found this :-

Steel Bridge Wall Spline
HUID:101839:22001

This could work well, all I have to do is change the brick work and I have endless possibilities

 

[NormP]

Did you check out the Road Bridge Kuid <1942:37065>.

Somewhat similar to the Bridge Photo you showed.

NormP.

 

[leeferr]

This is not about bridges but I have a problem that I have not been able to solve. In Survayor I am supposed to be able to assign a driver to the engine. When Ido this all that comes up on the edit screen is a blank properties screen and no driver. Can anyone help me.

You're right, it doesn't have anything to do with bridges. You really should keep your posts 'on topic'. You should post your question in an appropriate thread or start your own thread in the appropriate part of the forum. This is just a little friendly advice as it appears that you are new to the forums.

As to your question, I'm not sure that you're giving us enough information to answer your question. I suggest that you read the manual, search the threads for an answer if you can find it or start another thread to get your answer. By the way, don't expect an immediate reply to questions. Sometimes, answers can be hours or even days in coming.

By the way.
Welcome to Trainz.
Mike