NYC subway Route
- Thread starter ExpressLine3Train
- Start date
acelejalde
Urban Transit Developers
Damn! Jeff is getting some serious business done! As soon as I figure out this initiator/terminator tag problem for my stations, I will start in Midtown and work my way down and up
ThePandaTrain
Hayley Kiyoko Fan!
Alright, jeffmorris. When u planning 2 release it?
:wave:
:wave:
jeffmorris
Active member
Brighton Beach Route (B and Q) -completed.
Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
Sea Beach Route (N) - completed.
West End Route (D) - completed.
4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) from Times Square to 52nd Street.
Manhattan Bridge is done.
I don't know when the new NYCTA subway system will be done and be ready to be released. I had a lot of work creating the new NYCTA subway system for TS12. I am usually busy creating the new NYCTA subway system at nights on weekdays and all day on weekends.
Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
Sea Beach Route (N) - completed.
West End Route (D) - completed.
4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) from Times Square to 52nd Street.
Manhattan Bridge is done.
I don't know when the new NYCTA subway system will be done and be ready to be released. I had a lot of work creating the new NYCTA subway system for TS12. I am usually busy creating the new NYCTA subway system at nights on weekdays and all day on weekends.
acelejalde
Urban Transit Developers
You're making a lot of progress Jeff! That's awesome! I finally figured out how to use the initiator/terminator tags in Trainz, and am making my subway stations in the "bridge" kind, with both the start and end pieces incorporated into the spline. Once I test them, work should begin tomorrow. You're working from the south BMT upwards, I'm starting in Midtown and out =)
Again---a screenshot or two would be fantastic!
@Ish: nice to see you again! :hehe:
-A :wave:
jeffmorris
Active member
How in the whole world can I create complex elevated track structures like those at Broadway Junction?
acelejalde
Urban Transit Developers
Bway Jct
I use Bstyles' vintage and updated el track packs. If you need the cdp, send me a PM. My internet is down right now, hence I am on my phone. When things get fixed, I will gladly send it to you.
I use Bstyles' vintage and updated el track packs. If you need the cdp, send me a PM. My internet is down right now, hence I am on my phone. When things get fixed, I will gladly send it to you.
jeffmorris
Active member
Brighton Beach Route (B and Q) -completed.
Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
Sea Beach Route (N) - completed.
West End Route (D) - completed.
4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) - completed.
BMT Myrtle Route (M) - almost completed.
BMT Jamaica Route (J and Z) from Marcy Ave to Myrtle Ave.
Manhattan Bridge is done.
Williamsburg Bridge is done.
Problem: Myrtle Ave station on Jamaica and Myrtle Routes. The www.nycsubway.org website said that upper level has no tracks. There was a switch tower on the upper level but it is now abandoned. I think that the abandoned station platform is still there.
Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
Sea Beach Route (N) - completed.
West End Route (D) - completed.
4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) - completed.
BMT Myrtle Route (M) - almost completed.
BMT Jamaica Route (J and Z) from Marcy Ave to Myrtle Ave.
Manhattan Bridge is done.
Williamsburg Bridge is done.
Problem: Myrtle Ave station on Jamaica and Myrtle Routes. The www.nycsubway.org website said that upper level has no tracks. There was a switch tower on the upper level but it is now abandoned. I think that the abandoned station platform is still there.
Last edited:
acelejalde
Urban Transit Developers
Myrtle Avenue
When you gave Ish6 permission to re-skin your stations, instead of making them trackside objects, he made them free stand-alone objects. What I would do is search him on the DLS and put in "X-" into the name in CM and ALL of his stuff should show up. Download it all, and use his stations and trackless trestles to create the illusion of the abandoned upper level and the trackways with no rails. When I was working on the Jamaica El (before I decided to reconstruct it using my own assets), I was using his and yours, and that was my solution for the Myrtle Av problem. Unfortunately, the route has long since been deleted so I cannot provide pictures. If you need any help, please let me know.
P.S. Stations are working fine with a few needing minor tweaks--but when they are transferred over to the desktop, everything stops working. So I'm thinking either corrupted flash drive, or something. Will keep everyone posted.
-A :wave:
When you gave Ish6 permission to re-skin your stations, instead of making them trackside objects, he made them free stand-alone objects. What I would do is search him on the DLS and put in "X-" into the name in CM and ALL of his stuff should show up. Download it all, and use his stations and trackless trestles to create the illusion of the abandoned upper level and the trackways with no rails. When I was working on the Jamaica El (before I decided to reconstruct it using my own assets), I was using his and yours, and that was my solution for the Myrtle Av problem. Unfortunately, the route has long since been deleted so I cannot provide pictures. If you need any help, please let me know.
P.S. Stations are working fine with a few needing minor tweaks--but when they are transferred over to the desktop, everything stops working. So I'm thinking either corrupted flash drive, or something. Will keep everyone posted.
-A :wave:
jeffmorris
Active member
Brighton Beach Route (B and Q) - completed.
Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
Sea Beach Route (N) - completed.
West End Route (D) - completed.
4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) - completed.
BMT Myrtle Route (M) - completed except for upper level of Myrtle Ave station.
BMT Jamaica Route (J and Z) from Marcy Ave to Woodhaven Blvd.
Manhattan Bridge is done.
Williamsburg Bridge is done.
Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
Sea Beach Route (N) - completed.
West End Route (D) - completed.
4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) - completed.
BMT Myrtle Route (M) - completed except for upper level of Myrtle Ave station.
BMT Jamaica Route (J and Z) from Marcy Ave to Woodhaven Blvd.
Manhattan Bridge is done.
Williamsburg Bridge is done.
Last edited:
acelejalde
Urban Transit Developers
MannyB & WillyB
How high are both bridges at the following locations:
Brooklyn-end, Manhattan-end, and highest point, in the middle of the East River? I am making bridge splines at the moment, and would like to know those heights.
I will release pictures once the models are done and in game.
-A :wave:
How high are both bridges at the following locations:
Brooklyn-end, Manhattan-end, and highest point, in the middle of the East River? I am making bridge splines at the moment, and would like to know those heights.
I will release pictures once the models are done and in game.
-A :wave:
jeffmorris
Active member
http://en.wikipedia.org/wiki/Brooklyn_Bridge
http://en.wikipedia.org/wiki/Manhattan_Bridge
http://en.wikipedia.org/wiki/Williamsburg_Bridge
http://en.wikipedia.org/wiki/Ed_Koch_Queensboro_Bridge
http://en.wikipedia.org/wiki/Verrazano-Narrows_Bridge
The Brooklyn and Queensboro Bridges once had trains and streetcars running on them. The original plan was to have trains running on V-N Bridge but Robert Moses blocked the plan.
http://en.wikipedia.org/wiki/Manhattan_Bridge
http://en.wikipedia.org/wiki/Williamsburg_Bridge
http://en.wikipedia.org/wiki/Ed_Koch_Queensboro_Bridge
http://en.wikipedia.org/wiki/Verrazano-Narrows_Bridge
The Brooklyn and Queensboro Bridges once had trains and streetcars running on them. The original plan was to have trains running on V-N Bridge but Robert Moses blocked the plan.
acelejalde
Urban Transit Developers
NYCTA Subway Stations COMPLETED!
Huge milestone everyone--the NYCTA Subway Station pack has officially been completed! After several long months and testing everything out, they are done!!!! I had to go back and change some things, as well as re-texture with some new beams that BStyles gave me before his hiatus. Pictures are below, but one HUGE change---all of the stations except the 6 track models will be splines--with the end pieces already included. This means, all you have to do is drag to the appropriate length and that's it! The station is fully made, using the "bridge" tag and having the end pieces be the "initiator" and "terminator". The reason this doesn't work in the 6T models is that you cannot do splines with more than 5 tracks in TS2010 (only in TS12 so far). So, for DeKalb, 135th, Hoyt, and/or whatever your 6T subway heart desires, it's still object end pieces and splines. So without further delay....
1 Track Models (Bypass, Normal, One Wall)
2 Track Models (Island, Side, Island One Wall, False Wall [63-Lex])
3 Track Models (Island, Side, Essex-Delancey)
More in next post!
Huge milestone everyone--the NYCTA Subway Station pack has officially been completed! After several long months and testing everything out, they are done!!!! I had to go back and change some things, as well as re-texture with some new beams that BStyles gave me before his hiatus. Pictures are below, but one HUGE change---all of the stations except the 6 track models will be splines--with the end pieces already included. This means, all you have to do is drag to the appropriate length and that's it! The station is fully made, using the "bridge" tag and having the end pieces be the "initiator" and "terminator". The reason this doesn't work in the 6T models is that you cannot do splines with more than 5 tracks in TS2010 (only in TS12 so far). So, for DeKalb, 135th, Hoyt, and/or whatever your 6T subway heart desires, it's still object end pieces and splines. So without further delay....
1 Track Models (Bypass, Normal, One Wall)
2 Track Models (Island, Side, Island One Wall, False Wall [63-Lex])
3 Track Models (Island, Side, Essex-Delancey)
More in next post!
acelejalde
Urban Transit Developers
Second Batch
4 Track Models (Island, Side, 3 Platforms, Island/Side, Island with two side platforms, and the BMT Chambers St layout)
More in next post!
4 Track Models (Island, Side, 3 Platforms, Island/Side, Island with two side platforms, and the BMT Chambers St layout)
More in next post!
acelejalde
Urban Transit Developers
Final Batch
6 Track Models (Island, Side, and Island Bypass)
Enjoy! No definite release date yet--I have to see how trainz handles the frames, they all should be relatively low poly.
-A :wave:
Next up are the Williamsburg & Manhattan Bridges!
P.S. Just realized the 3T local station picture is not uploaded. I'll get on that later!
6 Track Models (Island, Side, and Island Bypass)
Enjoy! No definite release date yet--I have to see how trainz handles the frames, they all should be relatively low poly.
-A :wave:
Next up are the Williamsburg & Manhattan Bridges!
P.S. Just realized the 3T local station picture is not uploaded. I'll get on that later!
jeffmorris
Active member
acelejalde, Your subway stations look much better than mine!
acelejalde
Urban Transit Developers
Creators like you and Magicland paved the way first Jeff, so I will always be grateful for your content!
-A :wave:
jeffmorris
Active member
BMT Brighton Beach Route (B and Q) - completed.
IND Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
BMT Sea Beach Route (N) - completed.
BMT West End Route (D) - completed.
BMT 4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) - completed.
BMT Myrtle Route (M) - completed except for upper level of Myrtle Ave station.
BMT Jamaica Route (J and Z) from Marcy Ave to 121st Street.
BMT Canarsie Route (L) from 8th Avenue to Bushwick Avenue.
Manhattan Bridge is done.
Williamsburg Bridge is done.
Broadway Junction is the hardest part for me to create. From Altantic Avenue, the "L" trains goes up and over Jamaica Route, stopping at Broadway Junction before going into the subway and stops at Bushwick Avenue. Also, there are tracks from Canarsie and Jamaica routes to East New York Yard.
IND Culver Route (F and G) from Stillwell Avenue to Ditmas Avenue.
BMT Sea Beach Route (N) - completed.
BMT West End Route (D) - completed.
BMT 4th Avenue Route (D, N, and R) - completed.
BMT Broadway Route (N, Q, and R) - completed.
BMT Nassau Street Route (J, M, and Z) - completed.
BMT Astoria Route (N) - completed.
IRT Flushing Route (7) - completed.
BMT Myrtle Route (M) - completed except for upper level of Myrtle Ave station.
BMT Jamaica Route (J and Z) from Marcy Ave to 121st Street.
BMT Canarsie Route (L) from 8th Avenue to Bushwick Avenue.
Manhattan Bridge is done.
Williamsburg Bridge is done.
Broadway Junction is the hardest part for me to create. From Altantic Avenue, the "L" trains goes up and over Jamaica Route, stopping at Broadway Junction before going into the subway and stops at Bushwick Avenue. Also, there are tracks from Canarsie and Jamaica routes to East New York Yard.