New Aircraft

[hyderpotter]

I wish I can edit the number of the runway and not have Runway 10 all the time.

 

[hyderpotter]

G'day! :wave:

@vulcan. We need some more Luftwaffe Aircraft such as the ME-262, V-1 Buzz Bomb, JU-52, JU-87 etc so we can re-create WW2 style Trainz and Planez routes! *Imagines Air Raid sirens going off as the British hammer the German aircraft trying to bomb everything* I'm sorry... :hehe:

Cheers!

Jake.

I got my one Air Raid sirens on the download station.

 

[hyderpotter]

One thing I do not like about the pushback is there is no uncouple command within Surveyor.

 

[nzld]

One thing I do not like about the pushback is there is no uncouple command within Surveyor.

Go into the setup folder, next to the driver button on the top bar, and you can add the command form there.

Gordon

 

[hyderpotter]

Go into the setup folder, next to the driver button on the top bar, and you can add the command form there.

Gordon

Threre only uncouple in driver

Look at:


http://forums.auran.com/trainz/showthread.php?t=63039

 

[hert]

Use the uncouplez from command. If its just a vehicle and a plane then you want to set it to uncouplez from 2. You could use uncouple at trackmark too.

hert:wave:

 

[hyderpotter]

Use the uncouplez from command. If its just a vehicle and a plane then you want to set it to uncouplez from 2. You could use uncouple at trackmark too.

hert:wave:

Can you use uncouple at trackmark Surveyor, because i could not find one.

 

[vulcan]

Runway numbers could have been changed if I had used the a.name process to add the attachment points. I did not do that because the available fonts do not look anything like the real thing.

You can always amend the texture file for the asset to have a different number, but that will still apply to all the placed models. The other numbers in the texture file are for the runway number signs at the side of the pavement.

If you cloned the asset you could have other runway assets with different numbers, but only for your own use. I do not want clones of the runway model uploaded.

I uploaded the amended Fokkers last night with the corrected light position and four blade props, but they have not been processed.

Ian

 

[hyderpotter]

I just found out something about pushback.

The Pushback Tractor cannot pushback the planes if the plane has a drive to command, A wait command or tackmark command.

 

[hyderpotter]

where is the Airport Runway Light on the download station?

 

[stagecoach]

Search user name magicland for lights. You can push back with other commands but you need to do it in a way that only one driver is used. Add the pushback commands to the pilot and get him to move to the tractor to do the pushback and then return to the aircraft when finished.

 

[hyderpotter]

Search user name magicland for lights. You can push back with other commands but you need to do it in a way that only one driver is used. Add the pushback commands to the pilot and get him to move to the tractor to do the pushback and then return to the aircraft when finished.

That all everywell, But I got over 5 AI planes on the route so far

 

[hyderpotter]

Search user name magicland for lights. You can push back with other commands but you need to do it in a way that only one driver is used. Add the pushback commands to the pilot and get him to move to the tractor to do the pushback and then return to the aircraft when finished.

I did a search for magicland and could not see the runway lights approach

 

[nzld]

I did a search for magicland and could not see the runway lights approach

Look under user, minitrix

approach lights 152080:20040:1
apron floodlight 152080:20098

if you use the download station make sure you select 2004


Gordon

 

[magickmaker]

I wonder if we could get a squadron built? I'm needing one for eye candy for a route I'm working on, and it'd be easier if the "train" was a single squadron of planes.

 

[H222]

Ian, any chance you could please make a 238km speed board and a 278km speed board??
Jamie

 

[NormP]

Of all the requests (or are they demands) made to the great content makers we have (where would Trainz be without them?) rarely, if ever, do I see that litle word "Please"used.
I am suprised that some of them have not jacked up on the lack of courtsey
shown ?.

NormP.

 

[nzld]

Of all the requests (or are they demands) made to the great content makers we have (where would Trainz be without them?) rarely, if ever, do I see that litle word "Please"used.
I am suprised that some of them have not jacked up on the lack of courtsey
shown ?.

NormP.

Your right NormP,

Alot of excellent content has been produced by a very few creators, they all deserve our thanks.

Gordon

 

[seeseeme]

Hi Everyone,

My main Airport Terminal has already undergone further construction/reconstruction so I thought I would post a couple of screenshots.

I would also like to thank Stagecoach for a couple of great ideas from his Heathrow Airport WIP route.

The other thing I have been wondering about is some of the "name tags/markings" that we may see around an airport. I have modified one by Minitrix "Runway Name" (I think) to a different colour and different size. This was easy as I could do it in the Config File.

The other ones I have modified are by Paulzmay and are his "Road Markings" of which he made many various ones mainly for Trams some years ago. I left a PM for him to see if he could create a specific one (TAXI) but I am wondering if something else is possible.

Is it possible to create a generic RE-NAMEABLE items/creations which allows users to create there own specific road or runway markings similar to the ones below?

So for example with the ones by Minitrix we can already do this but in most/all cases I have seen by looking at a number of International Airports the writing is normally Orange on Black and not Orange on Invisible. I have no idea how to change the invisible part to black. These numbers are used to identify the terminal gates in most cases and not the Runways or Taxiways. Then we can change the "name" easy enough and the colour/size in the Config file as I have done.

In the case of the Road marking by Paul, is it possible to have something similar where we can change the word via a re-nameable method and if we wish to change the size and colour via the Config file.

Something like these (if I have explained it properly) would be very handy for many of us creating Airports.

If it is possible, then would someone please be willing to create them for us? Others in this thread may have similar ideas that could be created in a similar "generic" way.

Craig

 

[nzld]

Treminals looking great Craig.

Gordon