Loading and unloading

[Approach_Medium]

I have some TTX Centerbeam Flats that I would like to start loading lumber onto.
If I load at the lumber mill, will I actually see the lumber loaded onto the cars, or will they still show up as empty but with content that is more or less imvisible.

When I load a hopper car, does grain or whatever actually get piled into the car if I stop at a grain facility, or is all that for show?

I am thinking of using the LARS system.

Thanks for your help

FW

 

[rweber95]

The lumber will show up as long as the TTX's config.txt file has the lumbers kuid listed in the queues section and the lumber's kuid contains a mesh file of the lumber. I've loaded Lumber 8ft,<kuid2:30671:94407100:1> and Lumber 16ft,<kuid2:30671:94407101:1> into BCR Centerbeam Flat1,<kuid:95761:15101> and TTX Centerbeam Flat1,<kuid:95761:15103> using LARS IndustRail,<kuid2:69871:10001:3>.

Bob

 

[Approach_Medium]

The lumber will show up as long as the TTX's config.txt file has the lumbers kuid listed in the queues section and the lumber's kuid contains a mesh file of the lumber. I've loaded Lumber 8ft,<kuid2:30671:94407100:1> and Lumber 16ft,<kuid2:30671:94407101:1> into BCR Centerbeam Flat1,<kuid:95761:15101> and TTX Centerbeam Flat1,<kuid:95761:15103> using LARS IndustRail,<kuid2:69871:10001:3>.

Bob

Thanks. I'll have to make some lists of what cars can carry what products, and make sure I have the correct setup.

FW

 

[Approach_Medium]

Sorry for the double post. I'm not sure why I have two threads on this subject.

FW