Deleted All Switch Levers - Can't Add New Levers??

[boleyd]

I accidently deleted all of my levers in a route while cleaning up my local Content. So, I kust started to install new levers. However, everyone, of different types, gave a double red arrow. If I deleted all the track sections leading into a switch and re-did them then the switch lever was ok - red/green arrows. I suspect that some indicator/flag was still set somewhere so that an asset deleted via the Content Manager is not a total delete. As it now stands not only do new levers have to be installed but new track making up the switch must also be installed. I am going to try to find the original lever and restore it but doubtful that will work.

One other thing, I replaced al of the track via the Asset Replace function but no help.

 

[oknotsen]

Can it be that some levers are still on a layer that you made invisible? Check the list of layer (6th? tab) and see if any are hidden.

 

[boleyd]

Good thought but no luck. Located the original lever and added it to Local assets. Nothing appeared and manually adding them continued to show double red arrows. Another DLS anomaly. Cleaning out the local content can create problems. Was just trying to shorten the amount of things on the menus. Disable but do not delete:wave:

 

[Scottbe8]

One other thing, I replaced al of the track via the Asset Replace function but no help.

Well of course that didn't help. "Asset Replace" keeps all trackside objects intact. What you need to do is delete and replace every track surrounding a junction. If you use animated points, this operation should not interfere with other trackside objects such as signals and speedboards.