Trainz Railroad Simulator 2006
After you add an L SD70(s) to your layout in, "Surveyor," click on the question mark at the bottom right in the, "Trains," section & then click on 1 of your L SD70s. A box will appear after you do this & show that the L SD70 does not have any fuel nor any sand. To add fuel to the locomotive click on the diesel fuel icon & the menu will expand out. In the new part of the menu click on the "0" indicating there's no fuel in the engine & type in the amt. you want it to have. Then click on the locomotive sand icon & repeat the process. After doing this, if you want, go to the, "Objects," section & select the, "Diesel Refueling Depot," then click on the question mark, afterward the depot, & change the amt. of sand & diesel it produces from zero to want you want. When you go to, "Driver," in Cab mode none of your L SD70s will be running, to turn them on get inside each individual engine, turn to your left & look at the back of the cab. At the top of this wall you will see buttons & switches. Zoom in on them, locate the, "ISOLATION SWITCH," & move it to the, "START, STOP, ISOLATE," setting. After doing this click on the, "START SWITCH," & push it in. At this moment this particular L SD70 is running. Later in the round if you want to turn the engine off press the, "EFCO/STOP SWITCH," button (Emergency Fuel Cut Off). After you do this the, "START SWITCH," &, "ISOLATION SWITCH," should reset.
