Australian screenshots

[ZecMurphy]

Hi All
To clarify on the repairing of faulty content...

The content can ONLY be uploaded using the 'Download Station Cleanup' system, and ONLY if they are listed in the 'public repair' list. You can find info on the DLS Cleanup here: https://www.auran.com/planetauran/com_dls_cleanup.php

If an asset isn't in the public repair list, then a repaired version cannot be released, unless you have explicit permission from the author to release a repaired version elsewhere. However, this isn't preferred, as it will make finding the repaired version difficult, and could cause issues when it is eventually repaired via the DLS cleanup system.

Regards

 

[misterchugg]

hi mates

a shot from the same kulgun area with some of the kuids found

is there a way in win7 to search for all the missing kuids?
when i try in the folder they're in, it always comes back with no results found
thanks
ron



Uploaded with ImageShack.us

 

[trainz89]

Peter,

I was down there to drive the D17 which was assisting in shunting a work train which is currently used to repair track to hopefully get it up and running to the general public. As Ravenshoe is currently closed due to the recent track maintence of the section, and to perform essential maintence on the No.2 Bridge & No.4 Bridges which require new timber to replace the worn sections on the piers and sleepers need to replaced on both bridges. The entire line is currently being in the process over the following months to be replacing sleepers along the entire section from Ravenshoe to the terminus.

The carriages have been re-railed just after the derailment around July or early August as Queensland Transport needed to assess the damage and compile a report to be issued to the Rail Safety Department.

The cause of the derailment was that it was to my knowladge a hot day, and the rails were expanding but the fishplates and dogspikes were loose, and the rails widened. This was not known at the time to the crew and passengers The D17 and water wagon went across alright but the 4 carriages came off the tracks.

Cya Around,

Michael Gitsham
QHR Commissioner Of Railways & Secetery

I assume you really mean you are going to help them repair the track as operations ceased due to the de-railment of four carriages on the return trip on Sunday 3rd June. http://ravenshoesteamrail.com.au/HOME.2.0.html

 

[axe1970]

Nice work Mick

Even though I will release a TS2012 version of the Oxford to Queens Route, you are free to play around with it as much as you want, and even upload your own version.

Is the grass you used in the Nat's route built in to TS2012?

Regards

 

[matruck]

Nice work Mick

Even though I will release a TS2012 version of the Oxford to Queens Route, you are free to play around with it as much as you want, and even upload your own version.

Is the grass you used in the Nat's route built in to TS2012?

Regards

Great news Axe thanks, Kuid:400260:100205 and Kuid:400260:100209 both by Tram_ and both are on the DLS mate i just checked. They were made for TS2009.
Cheers Mick.:wave:

 

[trainz89]

Railway Workshops - Report On Rollingstock V1

Hello & Good Evening From Normanton, Queensland.

I hope everyone is having a enjoyable evening, and I am much enjoying the various shots that is being posted up. I look forward to download them and extending them to all my collegues here at QHR Limited.

@Ron, I am enjoying the screenshots of your route, and it comming along nicely. Watch out for the next few days for a few times that will make its way to your inbox.

Down to Business; QHR Trainz has been quite busy over the last few months creating content with myself at the wheel, being involved with the research, design, texturing and final testing of the models. Everything produced if of the highest quality standard, and nothing is left un-touched to produce models that trainzers want to enjoy for hours on end. The following models pictured below are to be formally released to the Auran Download Station during the course of the week. Models range from 3ft 6in to unique models that is only of Queensland Railways and we will be uploading some inter-state items; New South Wales ect. Shall we list whats on offer to download. Begin Volume 1;

QR PB15 732 - 3ft 6in

Custom drivers, steam effects, and textures.

QR PB15 444 to be both in 3ft 6in & Standard Gauge

Custom Cab, Steam Effects, Drivers, Footplate Crew & Textures.

QR CMI - Insulated Meat Wagon [SG & NG]

QR H Wagon - Avaliable In Original Red & 1970's Weathered Grey

Industry Loadable with various loads such as Pineapples to a Pit Props

QR F Wagon - Avaliable In Original Red & 1970's Weathered Grey

Industry Loadable with various loads such as Pineapples to Farm Equipment

Much more to come...

Much Regards
Michael Gitsham
Q.H.R Commissioner Of Railways & Secetery

 

[ad602000]

the wheels on the loco are to low michael, should be set at the same height as the tender, either that or the loco was accidently pushed down before export

 

[rastis]

G'day!

A quick announcement from me.

Trainz89 and I have been discussing the creation of a replica of the Old Ghan line from Port Augusta right through to Alice Springs. This route will NOT be follow the exact route of the real line, instead it will be a factual representation based off the route. The route will include landmarks and points of interest based off things that were along the Ghan route like the Pichi Richi Railway and the Algebuckina Railway Bridge. It will also feature locations that are named after towns the line served like Port Augusta, Marree, Quorn and others.

This will be a MAMMOTH project. Myself and Michael hope to build the seven-hundred and fifty kilometers of the line as it's real life counterpart once was. We need as many members as possible to jump on in this project with us and help us along with it. So any of you Aussie Narrow Gaugers, please help myself and Michael to acheive our goal of building this route!

Cheers!

Jake.

 

[misterchugg]

hi michael
no rush with that mate.
i'm having huge difficulties finding all the dependencies i need for my route from the old local folder.
i have to search for 1 kuid at a time.
it's taking me forever to get anything done

cheers
ron

 

[falcon500]

Shot of whatever in TRS2006. Loco, grass, and houses courtesy Super Nintendo. LOL

 

[misterchugg]

looks very nice falcon500
how did you get it into a super nintendo?
lol
cheers
ron

 

[falcon500]

looks very nice falcon500
how did you get it into a super nintendo?
lol
cheers
ron

Hi Ron
Why I just smashed my way in with my trusty ole hammer.
Cheers

 

[c38nsw]

Hi all,

Currently working on a route, here's some progress shot around Mullet Creek between Hawkesbury River and Wondabyne.

[/URL][/IMG]

[/URL][/IMG]

Still a bit of work to do on these bits, plus starting on the rest of Mullet Creek.

Cheers Cameron.

 

[TheWaluigiKing]

I thought they were "Hammer Proof"?:hehe:
Oh wait i'm talking about the N64.

 

[Ghostryder]

Have had a rough few weeks those that have been where i am now know what i have endured. Well i can say that work has progressed on my work in progress, here are a few shots of the progress.


Approaching Taringa.
Uploaded with ImageShack.us


Crossing the Brisbane River at Chelmer.
Uploaded with ImageShack.us


Wacol.
Uploaded with ImageShack.us


Goodna.
Uploaded with ImageShack.us


Backing over the Bremer River into North Ipswich Yard.
Uploaded with ImageShack.us


Pinkenba pre 1970.
Uploaded with ImageShack.us


Whinstanes.
Uploaded with ImageShack.us


Albert, two 1460s lead a empty livestock train towards Dutton Park, a DD-17 leads a Lota bound Service away from Park Road. As a C-16 Class loco heads for the Gabba Depot.

Ryan
Yes i was aware of the speed limits on those crossovers, i have been known to leaving little boo-boo's in the shot to see whose paying attention.

Falcon500
Thanks for the PM it is and can be hard at times but knowing there are people out there thatr i can talk to helps thanks.

Ghosty
Uploaded with ImageShack.us

 

[c38nsw]

Anyone know of any good trees to use that dont affect the performance of Trainz when placing quite a few of them in one place? The builtin Speed Treez affect the performance alot on my Trainz, even when the settings are at a minimal level

Cheers Cameron

 

[rastis]

Anyone know of any good trees to use that dont affect the performance of Trainz when placing quite a few of them in one place? The builtin Speed Treez affect the performance alot on my Trainz, even when the settings are at a minimal level

Cheers Cameron

G'day!

Pofig's 3D trees are a lot less CPU hungry but still retain detail. They are brilliant alternatives for the built-in ones.

Cheers!

Jake.

 

[c38nsw]

G'day!

Pofig's 3D trees are a lot less CPU hungry but still retain detail. They are brilliant alternatives for the built-in ones.

Cheers!

Jake.

Do you have a link to the site where I can download the trees?

Cheers Cameron

 

[misterchugg]

hi ghosty
you nailed those scenes.
great work mate

i still cant load your beta.
still looking for missing kuids 1 at a time on a 1tb back up drive

the time wasted is driving me nuts. lol

nice screens from everyone else as well
cheers
ron

 

[Petan]

hi ghosty
you nailed those scenes.
great work mate

i still cant load your beta. still looking for missing kuids 1 at a time on a 1tb back up drive the time wasted is driving me nuts. lol nice screens from everyone else as well
cheers ron

Agree that Scott's work is really great. Park Rd /Albert shot was interesting but hope you reduce that soot as one of my relatives lived near there before they built the freeway. Soot on washing day not welcome.

Ron, you are lucky as this old back up computer we are using since the computer crash can not handle trainz. I know you just went through the same frustrations and we will be ok eventually.