ATLS BR signals

[JackClare1995]

Hello, all!

I've been palming through my library of UK signals and none of them work with ATLS. Are there any ATLS compatible UK signals in 2, 3 and 4 aspect variants, and any ATLScompatible semaphore signals?

Regards, Jack

Edit: Found SEN City signals in 3 and 4 aspect, but still missing 2 aspect and semaphore signals that are ATLS compatible any help would be greatly appreciated

 

[stagecoach]

Sen city are the only UK style ones. Depending on what you need them for it is possible to do a workaround to get semaphore ones to work correctly. My ATLS Advanced Demo (On the DLS) uses semaphore at level crossings and stations. It involves the inverse slave and needs to be used very carefully as it can derail a train.

 

[JackClare1995]

I've heard the inverse slave causes people a lot of trouble, so I'll have a look at the demo and see if I can manage it if I can't, I'll just use a 3 aspect SEN City signal

Jack

 

[stagecoach]

You need to place the slave about 2 grid squares beyond the signal or else the block before the signal may think it is still occupied and cause the signal before that block to stay red. Make sure triggers are set far enough away to allow trains time to clear the slave. In the demo Ive used the slave is on a level crossing at the end of a platform. This allows the gates to remain open to traffic and the signal to be red when a train terminates at the station. The gates and signal will operate when the driver command is issued by that train.