Amtrak pics
- Thread starter tyard
- Start date
freightcar2
New member
Gandalf0444
FVRR member
It's the interior of the one of the Acela cars.
freightcar2
New member
Where are they avaible? :udrool: :udrool: :udrool: I'm not much of an Amtrak person, but seriously that is a wantie! :udrool: :udrool: :udrool:
Gandalf0444
FVRR member
Very nice pic WCL!
FC2. It should be on the DLS along with all the other Acela stuff
FC2. It should be on the DLS along with all the other Acela stuff
Thanks...I thought so my self...Its my new desktop skin :wave:
Gandalf0444
FVRR member
freightcar2
New member
Is it in this?
http://www.auran.com/TRS2004/DLS_packcontents.php?AssetPackID=64
Also, the interior of that car reminds me of an airplane. :hehe:
http://www.auran.com/TRS2004/DLS_packcontents.php?AssetPackID=64
Also, the interior of that car reminds me of an airplane. :hehe:
Wow. Any more rust and the loco might as well crumble apart.
For some reason the Acela passenger car interiors are messed up in my Trainz. I did everything as instructed in the various Acela threads, and I got the Acela locomotive cab interiors to work fine.
The Acela passenger car cab interiors are messed up as in chairs looking truncated or chopped off. Some other chairs are just plain not there.
Here's a couple of screenshots of what I'm referring to...
I'm using TRS 2006.
Any ideas how to fix these messed up chairs and stuff? I have set the Train Poly Count to maximum, and it doesn't help.
freightcar2
New member
Ugh! 
That better not happen to me, or Acela cars go bye bye in the trash.:hehe:
That better not happen to me, or Acela cars go bye bye in the trash.:hehe:Ugh!
I posted a thread about this problem a month or so ago, and I have yet to recieve any advice, feedback, or help on resolving this so that these car interiors work correctly instead of having these messed up chairs.
freightcar2
New member
Sorry, me no can help. Still guessing if the same thing might happen to me, or not. If they do, me no fix, acela cars go bye bye.:hehe:
You will have to do some work on the to get them to work in TRS06/TC. search the forum here and you should find a thread or two explaining what needs to be done.
I did the searches over a month ago about the Config.txt fixes. I did the whole Config.txt replacement trick for the Acela locomotive cab, and the cab works fine for me in TRS 2006.
The problem is, I also did the Config.txt fix for the passenger car cab views, the replacing of 2 or 3 lines of Config.txt trick. The passenger car cab views were invisible (not showing up at all) before that fix, and then I get all these messed up chairs (but a visible cab view) AFTER I do the fix.
Am I missing something here?
freightcar2
New member
Can you link me to some?
Here's the "fixes" I was referring to earlier.
This one... you select the whole text in Config.txt in the Acela HSEL cab interior folder (when you open for edit in Explorer). Replace the whole text in the file with the following text block (copy + paste). Don't include the ==='s.
====================================
kind "interior"
kuid <kuid:9:50013>
camera -0.6,0.5,0.4
mesh "cab_main.pm"
attachment {
main {
mesh "cab_main.pm"
att
}
reverser_lever {
kind "lever"
mesh "reverser.pm"
att "a.reverser"
limits 0,2
angles -0.5,0.3
notches 0,0.5,1
notchheight 1,2,1
radius 0.15
}
throttle_lever {
kind "lever"
mesh "throttle.pm"
att "a.throttle"
limits 0,8
angles -0.75,0.75
mousemode "exact"
notches 0,0.05,0.1,0.15,0.2,0.25,0.3,0.35,0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.75,0.8,0.85,0.9,0.95,1
notchheight 1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
radius 0.15
}
independentbrake_lever {
kind "pullrope"
mesh "emergencybrake.pm"
att "a.emergencybrake"
limits 0,32
angles -0.02,-0.03
notches 0,1
notchheight 0,0
}
trainbrake_lever {
kind "lever"
mesh "trainbrake.pm"
att "a.trainbrake"
limits 0,3
angles -0.55,0.55
mousemode "exact"
notches 0,0.25,0.3,0.35,0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.75,1
notchheight 1,1,2,2,2,2,2,2,2,2,2,1,1
radius 0.2
}
horn {
kind "lever"
mesh "horn.pm"
att "a.horn"
limits 0,1
angles 0,0.3
notches 0,1
notchheight 2,1
radius 0.1
}
light_switch {
kind "lever"
mesh "light-switch.pm"
att "a.light-switch"
limits 0,1
angles 0,3
notches 0,1
notchheight 0,0
radius 0.07
}
bell {
kind "pullrope"
mesh "bell.pm"
att "a.bell"
limits 0,1
angles 0,-0.005
}
sander {
kind "pullrope"
mesh "sander.pm"
att "a.sander"
limits 0,1
angles 0,-0.005
}
pantograph_lever {
kind "lever"
mesh "pantograph.pm"
att "a.pantograph"
limits 0,1
angles 0,3
notches 0,1
notchheight 3,3
radius 0.05
}
trackmonitor {
mesh "trackmonitor.pm"
att
}
displays {
mesh "displays.pm"
att
}
ampmeter_needle {
kind "needle"
mesh "needle_lbs.pm"
att "a.lbs0"
limits 0,1500
angles 0,3.15
}
ampmeter2_needle {
kind "needle"
mesh "needle_lbs.pm"
att "a.lbs1"
limits 0,1500
angles 0,3.15
}
bplocomain_needle {
kind "needle"
mesh "needle_red.pm"
att "a.mainreservoir"
limits 0,1103
angles -2.55,2.55
}
bploco_equaliser {
kind "needle"
mesh "needle_white.pm"
att "a.eqreservoir"
limits 0,1103
angles -2.55,2.55
}
bptrainbrakecylinder_needle {
kind "needle"
mesh "needle_red.pm"
att "a.brakecylinder"
limits 0,1103
angles -2.55,2.55
}
bptrainbrakepipe_needle {
kind "needle"
mesh "needle_white.pm"
att "a.brakepipe"
limits 0,1103
angles -2.55,2.55
}
speedo_needle {
kind "needle"
mesh "needle_speed.pm"
att "a.speed"
limits 0,71.5
angles -2.5,2.5
}
wheelslip_light {
kind "light"
mesh "wheelslip.pm"
att "none"
}
windows {
mesh "windows.pm"
att
opacity 0.2
}
}
description "cab of the Acela Express Power Car"
trainz-build 1.3
category-class "ZI"
category-region-0 "US"
category-era-0 "2000s"
category-era-1 "2010s"
username "Acela HSEL cab"
author "Adam Wojcieszyk"
organisation "freestate graphics"
contact-email "tolaris@ko.onet.pl"
contact-website "http://www.freestate-graphics.com"
license "This content may be redistributed for non-commercial purposes only. The assets (including all library, musical, cinematographic and artistic works found in the sound, music, video and data files) contained in this archive remain the property of the original authors."
kuid-table {
}
asset-filename "acela hsel cab"
==========================================
Now here's the "fix" for the passenger cab interiors. However, after doing this, I *STILL* get the messed up chairs as seen in my screenshots.
http://forums.auran.com/trainz/showpost.php?p=38307&postcount=82
I'm still frustrated. I really want the interiors of the Acela passenger cars to look as it should be, with full chairs and everything, not truncated or invisible or chopped off ones.
This one... you select the whole text in Config.txt in the Acela HSEL cab interior folder (when you open for edit in Explorer). Replace the whole text in the file with the following text block (copy + paste). Don't include the ==='s.
====================================
kind "interior"
kuid <kuid:9:50013>
camera -0.6,0.5,0.4
mesh "cab_main.pm"
attachment {
main {
mesh "cab_main.pm"
att
}
reverser_lever {
kind "lever"
mesh "reverser.pm"
att "a.reverser"
limits 0,2
angles -0.5,0.3
notches 0,0.5,1
notchheight 1,2,1
radius 0.15
}
throttle_lever {
kind "lever"
mesh "throttle.pm"
att "a.throttle"
limits 0,8
angles -0.75,0.75
mousemode "exact"
notches 0,0.05,0.1,0.15,0.2,0.25,0.3,0.35,0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.75,0.8,0.85,0.9,0.95,1
notchheight 1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1
radius 0.15
}
independentbrake_lever {
kind "pullrope"
mesh "emergencybrake.pm"
att "a.emergencybrake"
limits 0,32
angles -0.02,-0.03
notches 0,1
notchheight 0,0
}
trainbrake_lever {
kind "lever"
mesh "trainbrake.pm"
att "a.trainbrake"
limits 0,3
angles -0.55,0.55
mousemode "exact"
notches 0,0.25,0.3,0.35,0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.75,1
notchheight 1,1,2,2,2,2,2,2,2,2,2,1,1
radius 0.2
}
horn {
kind "lever"
mesh "horn.pm"
att "a.horn"
limits 0,1
angles 0,0.3
notches 0,1
notchheight 2,1
radius 0.1
}
light_switch {
kind "lever"
mesh "light-switch.pm"
att "a.light-switch"
limits 0,1
angles 0,3
notches 0,1
notchheight 0,0
radius 0.07
}
bell {
kind "pullrope"
mesh "bell.pm"
att "a.bell"
limits 0,1
angles 0,-0.005
}
sander {
kind "pullrope"
mesh "sander.pm"
att "a.sander"
limits 0,1
angles 0,-0.005
}
pantograph_lever {
kind "lever"
mesh "pantograph.pm"
att "a.pantograph"
limits 0,1
angles 0,3
notches 0,1
notchheight 3,3
radius 0.05
}
trackmonitor {
mesh "trackmonitor.pm"
att
}
displays {
mesh "displays.pm"
att
}
ampmeter_needle {
kind "needle"
mesh "needle_lbs.pm"
att "a.lbs0"
limits 0,1500
angles 0,3.15
}
ampmeter2_needle {
kind "needle"
mesh "needle_lbs.pm"
att "a.lbs1"
limits 0,1500
angles 0,3.15
}
bplocomain_needle {
kind "needle"
mesh "needle_red.pm"
att "a.mainreservoir"
limits 0,1103
angles -2.55,2.55
}
bploco_equaliser {
kind "needle"
mesh "needle_white.pm"
att "a.eqreservoir"
limits 0,1103
angles -2.55,2.55
}
bptrainbrakecylinder_needle {
kind "needle"
mesh "needle_red.pm"
att "a.brakecylinder"
limits 0,1103
angles -2.55,2.55
}
bptrainbrakepipe_needle {
kind "needle"
mesh "needle_white.pm"
att "a.brakepipe"
limits 0,1103
angles -2.55,2.55
}
speedo_needle {
kind "needle"
mesh "needle_speed.pm"
att "a.speed"
limits 0,71.5
angles -2.5,2.5
}
wheelslip_light {
kind "light"
mesh "wheelslip.pm"
att "none"
}
windows {
mesh "windows.pm"
att
opacity 0.2
}
}
description "cab of the Acela Express Power Car"
trainz-build 1.3
category-class "ZI"
category-region-0 "US"
category-era-0 "2000s"
category-era-1 "2010s"
username "Acela HSEL cab"
author "Adam Wojcieszyk"
organisation "freestate graphics"
contact-email "tolaris@ko.onet.pl"
contact-website "http://www.freestate-graphics.com"
license "This content may be redistributed for non-commercial purposes only. The assets (including all library, musical, cinematographic and artistic works found in the sound, music, video and data files) contained in this archive remain the property of the original authors."
kuid-table {
}
asset-filename "acela hsel cab"
==========================================
Now here's the "fix" for the passenger cab interiors. However, after doing this, I *STILL* get the messed up chairs as seen in my screenshots.
http://forums.auran.com/trainz/showpost.php?p=38307&postcount=82
I'm still frustrated. I really want the interiors of the Acela passenger cars to look as it should be, with full chairs and everything, not truncated or invisible or chopped off ones.