They built the easy part
. When you consider the terrain they would have needed to go through to get to Dorrigo it would have been an engineering marvel. And then the idea was to extend the line from Guyra to inverell once that was done! Guyra would have been quite a busy place. The cut and fill is all quite visible on the ground but I don't believe they built bridges - at least I haven't seen the remnants when I've walked the route. They got to Shanahans Road and from there I can't find any remnants.
The signals that are bothersome are:
<kuid2:209857:71117:1> NSW SL | 2a 2r T | LH
<kuid2:209857:71106:1> NSW SL | 2a Auto | LH
<kuid2:209857:71107:1> NSW SL | 2a Auto | RH
<kuid2:209857:71109:1> NSW SL | 2a Dist | LH
<kuid2:209857:71103:1> NSW SL | 2a | LH
<kuid2:209857:71104:1> NSW SL | 2a | RH
<kuid2:209857:71136:1> NSW SL | 3a 2r | LH
When I do "List Asset Versions" I get
<kuid2:209857:71117:1> NSW SL | 2a 2r T | LH
<kuid:209857:71117> <Unknown Asset>
which I take it means there is only one asset. Same for all of the above, with different kuid's
The error messages are as follows (same type for each signal)
; <kuid2:209857:71117:1> : Validating <kuid2:209857:71117:1>
- <kuid2:209857:71117:1> : VE18: Attachment point 'a.name0' referenced by tag 'att' in 'mesh-table/target/effects/name' was not found.
- <kuid2:209857:71117:1> : VE132: The attachment point 'a.name0' must belong to the parent mesh of the effect (mesh=model/target.trainzmesh).
- <kuid2:209857:71117:1> : VE18: Attachment point 'a.light4' referenced by tag 'att' in 'mesh-table/target/effects/s1' was not found.
- <kuid2:209857:71117:1> : VE132: The attachment point 'a.light4' must belong to the parent mesh of the effect (mesh=model/target.trainzmesh).
- <kuid2:209857:71117:1> : VE18: Attachment point 'a.light5' referenced by tag 'att' in 'mesh-table/target/effects/s2' was not found.
- <kuid2:209857:71117:1> : VE132: The attachment point 'a.light5' must belong to the parent mesh of the effect (mesh=model/target.trainzmesh).
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket0-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket0-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket0-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket1-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket1-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket1-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket2-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket2-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket2-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket3-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket3-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'bracket3-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head0-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head0-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head0-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head1-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head1-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head1-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head2-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head2-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head2-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head3-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head3-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'head3-lod2' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'screen-overlay3-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'headback0-o' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'headback0-s' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'headback0-r' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'name0-lod0' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'name0-lod1' must be found in mesh 'model/target.trainzmesh'.
- <kuid2:209857:71117:1> : VE15: Attachment point 'att' in 'name0-lod2' must be found in mesh 'model/target.trainzmesh'.
Beats Me!!!!
Cheers
Steve