UK Screenshots (Hi Res Version)
- Thread starter escafeld
- Start date
ex-railwayman
New member
Looks very prototypical to me- maybe a bit long for a 40 to pull though!
Looks about 12 coaches to me at a glance young Tony, well within a Class 40's capability, as long as they're all empty.....:hehe:
@ nexusdj
Is that a shot of TS2009 S&C ??? How well does it cope, framerate wise with all the splineage please, young man? Just as much as TC3 ??
Cheerz. ex-railwayman.
It's actually 14 coaches in tow which would be be a struggle for a 40 on the S&C but not unknown .....
Here's 40145 passing Penrith with 13 coaches in tow but obviously that end of the WCML is completely flat !!
http://www.youtube.com/watch?v=K82DyphRk_A
Only installed the route last night so not really had a chance to try it out fully (spent today reskinning). I've got problem's in that my Nvidia 8800GT Video card is now basically out of date so some of the routes that were in okay in TC3 are appearing a bit jerky in 2009 . I'll be buying a new up to date video card next week so I'll report back once that's up and running
Here's 40145 passing Penrith with 13 coaches in tow but obviously that end of the WCML is completely flat !!
http://www.youtube.com/watch?v=K82DyphRk_A
Only installed the route last night so not really had a chance to try it out fully (spent today reskinning). I've got problem's in that my Nvidia 8800GT Video card is now basically out of date so some of the routes that were in okay in TC3 are appearing a bit jerky in 2009 . I'll be buying a new up to date video card next week so I'll report back once that's up and running
ex-railwayman
New member
Only installed the route last night so not really had a chance to try it out fully (spent today reskinning). I've got problem's in that my Nvidia 8800GT Video card is now basically out of date so some of the routes that were in okay in TC3 are appearing a bit jerky in 2009 . I'll be buying a new up to date video card next week so I'll report back once that's up and running
That would be most helpful, thank you Sir....
Cheerz. ex. :wave:
A C2C 357 passes Shoeburyness park
Shoeburyness park from above
BTW the train is comming towards us.
Great shots as always everyone
Andy[/quote]
hey very nice but isnt there suppost to be a bridge right next to that block of flats
Come to think about it thats not the entrance to the Emd is it.
Ill keep the shots thumbnails as this is in another sim lol
Thats the place i thought was being spoken about.
Last edited:
bassist118
Suffering for his art.
Didn't realise this was done in MSTS
Its a bit further up than that about half mile from Thorpe Bay, your picture looks right at the enterance to Shoeburyness C2C Depot. I'm only using what I can download so some buildings wont be the same also I'm working from Google Earth so I'm guessing somewhat about the buildings anyway.
I'm just past Thorpe Bay sceenery wise it's taking ages, whos for TRS2011 Railroad Tycoon Edition the same as TRS except the towns sceenery etc is already done and you place the track, stations, depots etc earn money for sucessfull journeys and the added bonus of being able to drive the trainz in a prototypical environment with proper signaling too.
Cheers
Andy
Naa its not Msts its Railworks
Anychance of some depot shots in the same places of mine
the 302 308s are also available for Trainz to
Just search for wen on these forums should come up with some links.
Also check here the C2c cab ride dvds
http://www.225studios.co.uk/
Theres 7 in totaly wich i own all of them.
Anychance of some depot shots in the same places of mine
the 302 308s are also available for Trainz to
Just search for wen on these forums should come up with some links.
Also check here the C2c cab ride dvds
http://www.225studios.co.uk/
Theres 7 in totaly wich i own all of them.
Last edited:
Great shots everyone!
The front of the St Erth station building
2 Class 153s head down the mainline from Hayle, on the east of the hayle Estuary. Taken from the A30 Hayle Bypass bridge.
The Hayle Estuary at low tide taken from Lelant Saltings, on the western side of the estuary, on the St Ives Bay Line.
2 Class 150s arrive at Lelant Saltings Park & Ride station with a St Ives - St Erth service.
Mark
The front of the St Erth station building
2 Class 153s head down the mainline from Hayle, on the east of the hayle Estuary. Taken from the A30 Hayle Bypass bridge.
The Hayle Estuary at low tide taken from Lelant Saltings, on the western side of the estuary, on the St Ives Bay Line.
2 Class 150s arrive at Lelant Saltings Park & Ride station with a St Ives - St Erth service.
Mark
bassist118
Suffering for his art.
Anychance of some depot shots in the same places of mine
Will do (the catenery isn't finished in the C2C depot yet, too daunting)
the 302 308s are also available for Trainz to
.
Any idea where?
Cheers for the info
:Y:
Andy
bassist118
Suffering for his art.
@ Escafeld - That is one gorgous nothing in particular, wish my nothing in particulars looked as good as those.
Andy
Andy
2995Valliant
Well-known member
I'll second that!
Will it ever be released?
Anthony
Will it ever be released?
Anthony
Firstly, thank you both for your comments. This is going to sound bizarre, but I've mentioned it before. All the original maps I have run OK, but Vista won't let me do a Save, saying that I have to rename the file and do a Save As.
When I do a Save As and rename the maps I can alter them, run on them, but this is the bizarre part - they don't exist. I can find the kuids, using TrainzObjectz, but when I use Explorer they can't be found anywhere in the Auran folder.
I have just upgraded my PC Tools security and now find that I can't get into Trainz at all, which is due to some debugger. I have no idea what to do next and given all the trouble with Trainz and Vista 64-bit, I'm giving up. Captain Scarlet told me to reinstall Trainz on my second drive, but if it doesn't install without problems, that's it.
This is a screenshot that I've just saved when trying to open Trainz
Regards, Dave
When I do a Save As and rename the maps I can alter them, run on them, but this is the bizarre part - they don't exist. I can find the kuids, using TrainzObjectz, but when I use Explorer they can't be found anywhere in the Auran folder.
I have just upgraded my PC Tools security and now find that I can't get into Trainz at all, which is due to some debugger. I have no idea what to do next and given all the trouble with Trainz and Vista 64-bit, I'm giving up. Captain Scarlet told me to reinstall Trainz on my second drive, but if it doesn't install without problems, that's it.
This is a screenshot that I've just saved when trying to open Trainz
Regards, Dave
Last edited:
bassist118
Suffering for his art.
@ Escafeld
Now thats more like a nothing in particular.
The only way I stopped all probs with vista (32 bit however) was to install trainz (I use 04) directly into the root directory. I read somewhere that vista needs to right stuff into the program files folder. Back up everything trainz and re-install into the root directory. I can't say if it will solve your problem but I haven't had any problems with trainz and vista since (I don't even have to load it up using admisistrator)
Hope this helps.
Andy
Now thats more like a nothing in particular.
The only way I stopped all probs with vista (32 bit however) was to install trainz (I use 04) directly into the root directory. I read somewhere that vista needs to right stuff into the program files folder. Back up everything trainz and re-install into the root directory. I can't say if it will solve your problem but I haven't had any problems with trainz and vista since (I don't even have to load it up using admisistrator)
Hope this helps.
Andy
It's actually Trainz that needs to write stuff into the program files folder (ie. where your content is saved) and by default Vista does not allow programs to do this.
One solution is to turn off UAC (Google it if you want to try it), and another is to install somewhere other than program files (ie. C:/Auran). I think there are a number of other ways also but I can't remember them off the top of my head!
One solution is to turn off UAC (Google it if you want to try it), and another is to install somewhere other than program files (ie. C:/Auran). I think there are a number of other ways also but I can't remember them off the top of my head!
I've just upgraded my main PC to Windows 7 Pro (64 bit), so I'll be able to give you an idea of how well it performs
Similar threads
