@Captain Scarlett- I thought you'd be interested in these two views of the inside of the completed Finsbury Park depot:
Although the building on the DLS does not have any internal fittings, all of these are available separately on the DLS and I fitted the entire building out internally. Tinsley depot had a separating wall running along the middle and was effectively two depots, so the FP buildings are ideal.
The platforms were developed especially for this building by Greeni and myself, you can find them on the DLS under my username, named depot platform range. I used a class 40 to check for clearance, in reality this was very tight in the depot but with a bit of careful placing the fit is perfect.
The fluorescent lights are called light spline, these are fitted under the edge of the platforms as well as at roof level also.
The depot clock is optional, this one works and is by Saxham_Market.
Concrete slab 10m and 25m are fitted side by side to form the depot floor, one of these needs lowered by 0.01m to avoid texture flashing.
The pits are ash pit spline on the DLS, although they do not have a depth below ground level, the clever texturing makes them look as if they have!
HTH
go figure, I'll have tests to run to see which ones matches best.
