Train priority prob.

[unforsakin]

Ok guys the trains "cafe" and "duke" are both giving supplies for the airport, the first time they ran into each other on ai, i put signals, now they sit there waiting for clearance, idk what to do anymore with it, btw its train simulator 12, please, someone help me:'(

 

[pfx]

You really need to register your copy of Trainz first of all, otherwise the suspicious minds around here may start shouting at you and you may find people are wary of providing help.

Click on 'Register' above and enter your serial number.

As for your problem, it's not very clear. Are you trying to get 2 consists to go on to the same track or are you wanting one to enter the track after the other has left? It's hard to see if you have a double or single track but if it's single, the signalling doesn't appear to be correct and as the turnouts are set in your screenshot, nothing is going to move as both consists will 'see' a train in the next block.

 

[unforsakin]

first off, iv registered it as iv told people, its not activating, i have no freakin idea why, but its a single track for the airport, one with goods, one with gas, i want one to go in, leave, then the other one come in and leave.

 

[cascaderailroad]

AI (artificailly dumb drivers) sometimes need all down the line, specific progressive driver commands ie: (Drive/Navigate Via: a-b, b-c, c-d ... etc ..) I have my route set with signals so that "Just Drive,Forever" "AutoDrive", and "Autopilot" keep trains separate, so they do not rear end eachother.

Oftentimes a dedicated one dirrectional separate right of way is needed, as oncomming opposing trains can block the path.

 

[unforsakin]

yea :/ ill have to redo it all iguess, then i guess idk pout lmao, :/

 

[unforsakin]

also, is there a way to save the ai's schedual?

 

[pfx]

Apologies, my duff info there. The serial number goes in your profile, not the 'Register' tab which may explain why it hasn't shown up. Click on Profile, then Serial Number in the left column. That should fix it though if not, it will take a ticket with the helpdesk if you haven't done so already.

I think you need to have a signal prior to the turnout at each end of your industry track. Cafe should be sitting beside a signal which may be obscured by the black circle. It may help but you could find you have to use the train/track priority triggers or set up commands to ensure that one loco waits for another to vacate the track. Is all the track shown dual direction running?


Edit - I see you have a similar reply prior to my posting this.

 

[unforsakin]

you can make track go one way?! im new dude lol, but yea guess so then, and yes it is setting beside one,
-btw yes ik i did it aroudn three days ago, some dude told me to i tried

 

[pfx]

There are track direction markers in the track tab on Surveyor. It's the third button across (can't remember the icon) and you'll see it there. It's a yellow arrow. This would allow you to set up a double track, one in each direction, which could solve the problem.

 

[unforsakin]

ok but here is the prob, sometimes with double track, the rails mess up big time, like idk how but they intertwine if you get what i mean like the right one switches to the left one, idk how, most of the time it does it on curves

 

[fran1]

With the rails intertwining put extra splines in and move the new splines to pull the rails apart.
As said before use track direction markers, use triggers also 1 for in 1 for out.
Say duke gets there first he'll follow his schedule, cafe behind him gets an extra 2 commands, drive to track mark, wait for trigger out to be triggered by any train/or wait for trigger to be triggered by (insert duke's loco). You can insert these as needed on the fly.(go between 2 commands r/click and put new command in, you can also drag 1 out using the mouse cursor).
To save schedules you'll need 2 things added to the session.1- Schedule library, 2-copy commands from.
Main menu, edit session, add, scroll down and get schedule library, select. (If you can't find it download it).
In the same spot, select driver commands, edit, tick copy commands from. (you can only do this after you've enabled the schedule library).
Now open schedule library and name your first schedule (oil-airport) and put all commands you use in that. refinery-airport-unload-back to refinery-load. When airport needs oil you find driver and give command, copy command from/schedule library/oil-airport.
2nd schedule (petrol-airport) same again.

 

[Deano5]

I have told him a few times in many of the other threads he has started how to register correctly and it just gets brushed aside, and not just me either but a few other members, they were brushed aside also because there is still members who will solve his problems regardless!

 

[unforsakin]

what is so big about registering, and like iv told you plenty of times it was declined, i have no idea why, its a brand new out of the store, what am i suppose to do :/

 

[fran1]

get serial number off box or manual first

It's so we know you have a legit copy of trainz. Also Auran, without it you can't download assets.
Use the profile bit at the top left of here, open it, put in user name and password, log in.
You will see trainz on the left part way down, under that serial number, open that. Put the number in as you see it, the version under that, where you bought it doesn't matter much, shop. store.

 

[colourlight]

You are assuming Unforsakin has a legit copy of trainz. Need I say more?

 

[Retro00064]

If you are having problems registering your serial number, click the "Helpdesk" button at the top of this page, and submit a ticket describing your problems.

Regards,

Retro.