The Mesh appears to be missing some type of light.

xcrossi

New member
Up_dating to BUILD 58414
kuid <kuid2:97212:17244:2>

username "Alco C636"


The Mesh appears to be missing some type of light.

What do I do to add “corona”
Will adversely effect the looks of the engine if I delete tags.


Error: Attachment point 'att' in '0' must be found in mesh '636.im'.
Error: The attachment point 'a.flash0' must belong to the parent mesh of the effect (mesh=636.im).
Error: Attachment point 'att' in '1' must be found in mesh '636.im'.
Error: The attachment point 'a.flash0' must belong to the parent mesh of the effect (mesh=636.im).


mesh-table
{
default
{
mesh "636.IM"
auto-create 1

effects
{
0
{
kind "corona"
att "a.flash0"
frequency 1
directional 0
object-size 0.15
}

1
{
kind "corona"
att "a.flash0"
frequency 1
directional 0
object-size 0.15
}
 
AssetX is your friend here. Use it to check if the attachments exist. If they do not then no amount of searching for them will add them to the locomotive. Just delete the lines.
 
I have downloaded and had a look and I think instead of a.flash0, which appears twice, the attachment points should be a.light0 and a.light1 which do not get a mention in the config.txt file.
 
YES! of course I see it now. Thanks for taking the time to DL.
Ill just correct the cfg to read a.light0 and a.light1
 
You might have a bigger problem with the locomotive because the bogies seem to bury themselves in the track.

Will probably need to adjust the height using PEV's attachment maker as long as it does not then bury them in the locomotive.
 
Thanks to you it has been a good learning experience.

The top corona is several inches in front of the lens.

I'v struggled for hours with attachment maker.
I'v almost made every mistake you can make
with attachment maker and still failed.
But that is for another day/
 
Back
Top