Subways, Underground, Tram or anything else Urban shots!

Yes they are! But only the blu one, the red one are an fictional repaint made by me.

Be carful installing this now, there are MANY changing since the relese, and download everything in the order I'm telling you.

First this:
http://www.e-buzz.se/forum/showpost.php?p=283550&postcount=2 (you DON'T need the "Saxpantograf",that one is WRONG and will be replaced by another one only later)

http://www.e-buzz.se/forum/showpost.php?p=283764&postcount=9 This is the wagons, pretty much needed... (:

http://www.e-buzz.se/forum/showpost.php?p=283693&postcount=7 Pantographs

If you still miss something, please tell me! And you must be signed in to download.

And hope you understood my english :o

//Jocke :)
 
Thank you Jocke,

i downloaded everything as you recommended. I hope it will work give a try right now.

My second question was about the hangers of the tram catenary system. Unfortunatelly I do not speak so good Swedish as you speak English...

Cheers:
Sura
 
Thank you Jocke,

i downloaded everything as you recommended. I hope it will work give a try right now.

My second question was about the hangers of the tram catenary system. Unfortunatelly I do not speak so good Swedish as you speak English...

Cheers:
Sura
Ohh, you mean the catenary! :o It's named "Rustram", not sure were I've find it, and the pylons is avalible at DLS, named "Strab" and something after that. I hope that was what you meant xD
 
Just noticed a whole load of screenshots from a route i'm working on have vanished from this thread and in some cases been replaced with random photos ? Anybody know why this would be the case ?....It now seems to have been rectified overnight.
 
Last edited:
Out of the industrial estate and through a stretch of green belt.
whbc6o.jpg
2yvrn7s.jpg
9gj1xk.jpg
257h9n6.jpg
n68683.jpg
1eat1d.jpg
6xzrxf.jpg
2is79zl.jpg
15qb1bq.jpg
15nxeom.jpg
 
Last edited:
TUME’s Street & PCC Car Project

Hallo,

besides my Milwaukee Road Project (http://forums.auran.com/trainz/showthread.php?t=39904) I am also working at a Street Car Project, just as I like trams. Also sometimes I need a little break working on just one project.

There is a set of PCC cars under creation as well as a set of street cars from back of the 30’s. Some of the PCCs will be a virtual model of San Francisco's Muni PCCs , the others will be set up as fictional versions.

Last year, I undertake a study for creating San Francisco’s F line by extending the cable car route which is already at DLS provided by NormP. But this would need the creation of a huge number of special buildings and a new track, street, junction and board walk asset to be able to build the many streets at the slopy terrain. Most of the buildings at DLS have been designed for a flat ground and would not fit. Anyway, it would be possible even right now, but with an enormous and inefficient effort of time.
Therefore I decided to go for a fictional large city first, where I can use the DLS objects available right now. About 15 Kilometres of street car lines and the area around it have already been created so far.

See a video of my San Francisco route study at:

http://www.youtube.com/watch?v=ILQrCg02f9A



San Francisco’s MUNI PCC number 1050 under creation using gmax.


San Francisco’s MUNI PCC number 1050 under creation using gmax.


San Francisco’s MUNI PCC number 1050 under creation using gmax.


San Francisco’s MUNI PCC number 1052 under creation using gmax.


San Francisco’s MUNI PCC number 1052 under creation using gmax.


San Francisco’s MUNI PCC number 1050 under creation using gmax.


Street Car like used around the 30’s, with the typical pedestrian live saver in front.


Street Car like used around the 30’s, with the typical pedestrian live saver in front.


Street Car like used around the 30’s, with the typical pedestrian live saver in front.


Some interior pieces selected in gmax.


Have a nice weekend.


Hey tume great streetcars! Can I download the streetcar with the pedestrian live saver?
 
Wow Hotgrove, that is stunning! I really hate being a gimme pig but, which overhead supports are you using there? They look fantastic; everything looks fantastic! :udrool:
 
Thanks for the nice words Jack.The overhead is built in (trainz 2009).They can be found under trackside mode 'y'.I find them easy to work with as the one i use fits the height perfectly for the choice of tram i use.The contact wire has to be added manually though but it is easy enough.I have simply added the small lamps at the top of each pole to give them a better look....a bit painstaking but however.....my screenshots look poor quality from my side...tried using a number of different settings with photoscape but no matter what i try they still look poor..........regards hotgrove.
 
Last edited:
Hallo chickenjoe,

thank you for your interest on the streetcar with the pedestrian live saver. Right now this car has not been finished. Also the original mesh came from another creator and I dont have the permission yet to distribute it to anybody else. I just created a lot in addition to the original mesh - e.g. the whole interior and the live saver. But such additions and improvements does not change the situation that I need permission first.

At the moment I am working at my Milwaukee Road project and I dont have time left at the moment to put forward with the streetcars.

Your's TUME
 
Never fear tram/streetcar fans, a heap of new content is on it's way, courtesy of your's truly....:p
191f43481877da48a6327fcf52fd8763.png

82825029f1e2c1c05856fa7f5f2c4225.png

4b7db34ca2fbfd94404633b24f678d15.png

22f4986148ff02e3dfedcb2c60201543.png

5caa05db4319c2203b9571038870c0fa.png

c59525598aff05f41186678de7795796.png

These are all trams that run (or have ran) on the Blackpool Tramway in Lancarshire, England, but I might do a London/Leeds/Sunderland Feltham, and perhaps a few US streetcars...
Anyway, would anyone like to help me get them in to Trainz? I've tried, and failed horribly, so I'm looking for someone experienced to get them in to Trainz. I will credit you on eventual release too.
 
Thanks susanaes....those wires are built in content...trz 2009....Tram Cat- 64 contact wire........Nathanmallard,those seaside trams look superb.....would love to see them on the DLS.
 
@ These are all trams that run (or have ran) on the Blackpool Tramway in Lancarshire, England, but I might do a London/Leeds/Sunderland Feltham, and perhaps a few US streetcars...
Anyway, would anyone like to help me get them in to Trainz? I've tried, and failed horribly, so I'm looking for someone experienced to get them in to Trainz. I will credit you on eventual release too.

I can help you. I don't care about any credit myself. All I would need are your model folders, your choice of bogies and other attachments. from these I can make a Trainz folder with attachments filled and config to match. All you would need ti do is put in your number to match your other assets or supply me with them to put in myself for you. PM me if this sounds agreeable with you.
 
Back
Top