Station Stop points

[DESDICHATO]

Guys,

I am experiencing an annoyance of a steam train pulling into a station but only the loco and tender are actually on the platform the rest of the train hasn't got past the station entry.

A previous contact with the forum told it was bad scripting and I'm wondering if it's possible to modify the script to have the train pulling in to the station fully, the stations I am using are start with STN MN......... there is a series of about a dozen some of which make good small town stations - My problem is I know nothing about creating content and really only want to build a layout for my self and play....what should I be looking for in explorer????

Thanks

 

[phimat]

Seems a problem with older stations. Use Track Markers. Not pretty, but will do the job.

 

[p-dehnert]

You have to use 'drive to station' or 'navigate to station' followed by 'load' (or 'unload', if you only want to unload). The 'drive/navigate to' only take the train to the beginning of the station. The '(un)load' moves the train to the correct position for passenger exchange, and does the (un)loading.

Peter

 

[phimat]

You have to use 'drive to station' or 'navigate to station' followed by 'load' (or 'unload', if you only want to unload). The 'drive/navigate to' only take the train to the beginning of the station. The '(un)load' moves the train to the correct position for passenger exchange, and does the (un)loading.

Peter

Good to know this for the future. I've Trackmarked all the old station and it would be quite a job changing them all again.