On the hunt for a bridge like this (Ben?)

gearhead2578

New member
Looking for a bridge for my WIP route - something similar to this but mostly for the railings to use for old highways and hopefully compatible with yarnish roads..... wow that's a long shot:o


eaton st bridge by welder3078, on Flickr

Hoping someone might know of one already available off the top of their head, I looked and couldn't find one. Any help is surely appreciated!

Mike
 
I did a low-poly version of a similar bridge where I simplified the railings. I'm not sure if this would be of use....
bridge.jpg

124060:32016 on the DLS; TRS2004.

Curtis
 
slotted = poly killer

Probably best to go with the solid sides. Likewise, I've needed bridges similar to this for my project. Likewise, I'm using YARNish roads. I thought the road could just be laid across the bridge, but I see from your screenshot, that won't work. I like the bridge!!!
 
Looking for a bridge for my WIP route - something similar to this but mostly for the railings to use for old highways and hopefully compatible with yarnish roads..... wow that's a long shot:o


eaton st bridge by welder3078, on Flickr

Hoping someone might know of one already available off the top of their head, I looked and couldn't find one. Any help is surely appreciated!

Mike

Hey, Why is the bridge closed?
 
@ Pencil42 No doubt, that'd be a big whoops with a wide truck!

@ Eaglerail - that bridge was demolished, not sure why. Probably gov't make-work to spend up $$ so as not to lose next year's highway budget. Sad, really, but it happens all the time.
~EDIT~ found this on the web along with that same pic:
Albion has slowly been demolishing all of their old bridges. Like the rest of the country, their activities have not focused on maintenance to extend the life of bridges, but instead consists of doing nothing and then engaging in demolition and replacement. Such a strategy, in the long run costs more money and deprives Albion of a nice collection of attractive bridges. Albion once had a magnificent 1896 stone arch bridge, one of the longest in Michigan, but that has been gone for many years now. Sometime in 2006 this bridge was closed to traffic, obviously due to advanced structural deterioration. Albion is now working to get this bridge demolished and replaced with an ugly slab of concrete. Road salt damage and a lack of routine maintenance (cement patching, repair, etc) most likely contributed to the bridge turning into the badly damaged structure. The last posted weight limit prior to closure was 26-32-27. For the bridge to go from that fair weight limit to closure really makes one wonder if anyone was even looking at the bridge for the last few years, or if the closure was simply to make the situation look worse than it was. The bridge was demolished early Spring 2007.
 
Last edited:
Don't think I've made one like that but if you can't find a suitable substitute I can make one for you. Need length, width, height above the water, number of lanes, etc.

Ben
 
Don't think I've made one like that but if you can't find a suitable substitute I can make one for you. Need length, width, height above the water, number of lanes, etc.

Ben

Ben-

There are just SOOOOO many of those style bridges, especially in the northeast..... They would be a great candidate for a spline...... I know if they existed, I'd use the hell out of them, especially with a YARNish road on it. (Man, I wish I knew how to build stuff instead of just repainting)
 
Ben-

There are just SOOOOO many of those style bridges, especially in the northeast..... They would be a great candidate for a spline...... I know if they existed, I'd use the hell out of them, especially with a YARNish road on it. (Man, I wish I knew how to build stuff instead of just repainting)

So true. I could use a 3 track version to go over a road (hint, hint!, please if you're doing one, Ben!) And so many if not most other bridges that are not that exact style still have that tan, aged-concrete look, as opposed to the gray concrete of modern bridges.
 
Is that Ben a nice guy or what!

Ben is awesome. He did two bridges for me and was back and forth constantly with me making sure that everything was "just right" and he wanted to make sure that I got exactly what I wanted.

In order to get a perfect bridge:
1) Look everywhere so you don't need to bother Ben to make something that is already out there.
2) If you can't find it, have everything dimensionally (and pictures!) for him, and he will make exactly what you want.

Trust me- the bridges he made for me are better than I could have imagined.
 
I can make 2, 3, and 4 lane road versions as splines. For those that want both road and rail you can run the track of your choice across it afterwards I'd think. Just takes info and the kuid of whatever road spline you want them to use so I can make them the proper width to fit the road spline.

Just need the basic info I mentioned above. The one pic is enough (and yes - I've already printed it out, ha ha). At a guess its about 80 ft long total so I can wing it if no on minds. Its built on the same basic principals as those in the books I have on bridges.

Ben
 
Last edited:
I thought you might run into this thread!! You know yo've always been our resident bridge guru..... If I could fit a yarnish 2L with shoulders over it, the deck wouldn't matter as far as texture or road compatability. The surveyor ruler measures that width at 36' even. Abutments and supports aren't important either these days as there's soooo many out there (I'm trying to make this easier). If it can be done in a spline, cool - if not, 250-350' range works well as terrain can be sculpted to match. This type of bridge is what was used on all the older highways in the Pacific Northwest as well and there's still hundreds of them in use, usually crossing creeks, but some are still in use over I-5.

Hope that helps, and thanks
Mike

~Edit~ Not sure if it's important but this particular WIP is being built first in TS2010
 
Last edited:
This type of bridge is what was used on all the older highways in the Pacific Northwest as well and there's still hundreds of them in use, usually crossing creeks, but some are still in use over I-5.

Hope that helps, and thanks
Mike

~Edit~ Not sure if it's important but this particular WIP is being built first in TS2010

This looks like many bridges in my area as well. They were built during the 1930s most likely in the WPA project that build so many roads and bridges in this country.

John
 
Your bridge splines have been uploaded. 2004 version to TPR - 2009 version to the DLS. TP{R site is fast - DLS might take a day or two. Both use a YARN road splines. Two problems with one like this (all road bridge splines really).
1. Adjusting the width of the Gmax parts to match the width of the road spline.
2. Many road splines taper on the sides so some of it must be hidden in the Gmax mesh (looks odd otherwise).

Enjoy.

Ben
 
WOW that was quick - thanks a million, Ben!! I'm sure there'll be a lot of happy rivet counters around here able to use these!!:D

Mike
 
Your welcome.

Thats why I'm here. Making "stuff" for other Trainzers. i don't actually run Trainz to run a train. Just a test route of blank baseboards for checking things I make before uploading. Tis what I like to do. I'd guess 90 to 95% of what I've made is for others.

Ben
 
Your welcome.

Thats why I'm here. Making "stuff" for other Trainzers. i don't actually run Trainz to run a train. Just a test route of blank baseboards for checking things I make before uploading. Tis what I like to do. I'd guess 90 to 95% of what I've made is for others.

Ben

Glad to hear it! All though I don't make the models, I'm in good company! Thanks for what you do, like David Drake, you are legend in Trainz.
 
Back
Top