Hi Papou,
Thanks for the information, I'll give it a try over the weekend and post an updated model when finished.
Gordon
New Aircraft
- Thread starter seeseeme
- Start date
Hi Papou,
Thanks for the information, I'll give it a try over the weekend and post an updated model when finished.
Gordon
Thanks Bill, I'll get it right one day, the old grey matter is spinning at the moment just trying to work the basics in 3ds max. :hehe:
Gordon
Air Canada - Tango
I was boarding a Jazz flight to Vancouver Island this morning to go whale watching out of Campbell River (I wish!) & noticed a couple of strange purple tails with maple leaf logos.
As it turns out they were a couple of jets operated by Air Canada's low cost, no frills carrier, Tango.
There was an A320 & a Boeing 737 parked at the regional/domestic terminal at Vancouver Airport. The Tango brand is the Air Canada equivalent to Jetstar for Qantas or Tiger for Singapore Airlines.
Sorry guys. I like to make my upload notifications to DLS interesting so I tend to tell a bit of a story. You've probably noticed...
So down to business. The A320 is pretty straight forward but the 737 is meant to be a 737-200 which are being phased out for most airlines. I'm not even sure whether Tango is still operationg the 737-200 anymore. They only had 4 to start with. The 737-200 has been around since the late 1960's & was superseded by the 737-400 series. Vulcan doesn't have a 737-200 in his increasing large list of aircraft so I've based it on the more current 737-400 series. They are fairly close to being the same size & capacity.
These two are available on DLS.
Airbus A320-232 Air Canada Tango <kuid2:590184:100136:1>
Boeing 737-200 Air Canada Tango <kuid2:590184:100138:1>
I'm trying to sytematically add aircraft to the family starting with Air Canada & Alaska Airlines. I'd like to fill the gaps for the other major North American carriers. I'm currently working on re-painting the United/Continental aircraft because the two companies merged in November 2011 & consequently have new paint schemes. They have the Continental markings but the United brand name. I've already done a <clone &> logo change on Vulcan's Continental 737-824 and an equivalent re-badge on the Dash-8-400. I still have to re-skin the B767, B737-400, B747-400 & A320 pretty much from scratch. There are no B777, B757, Embraer E190, or Bombardier CRJ models to work with at this point but I will probably do a Gulfstream mimic for the CRJ-200 as well.
Stay Tuned.
I was boarding a Jazz flight to Vancouver Island this morning to go whale watching out of Campbell River (I wish!) & noticed a couple of strange purple tails with maple leaf logos.
As it turns out they were a couple of jets operated by Air Canada's low cost, no frills carrier, Tango.
There was an A320 & a Boeing 737 parked at the regional/domestic terminal at Vancouver Airport. The Tango brand is the Air Canada equivalent to Jetstar for Qantas or Tiger for Singapore Airlines.
Sorry guys. I like to make my upload notifications to DLS interesting so I tend to tell a bit of a story. You've probably noticed...
So down to business. The A320 is pretty straight forward but the 737 is meant to be a 737-200 which are being phased out for most airlines. I'm not even sure whether Tango is still operationg the 737-200 anymore. They only had 4 to start with. The 737-200 has been around since the late 1960's & was superseded by the 737-400 series. Vulcan doesn't have a 737-200 in his increasing large list of aircraft so I've based it on the more current 737-400 series. They are fairly close to being the same size & capacity.
These two are available on DLS.
Airbus A320-232 Air Canada Tango <kuid2:590184:100136:1>
Boeing 737-200 Air Canada Tango <kuid2:590184:100138:1>
I'm trying to sytematically add aircraft to the family starting with Air Canada & Alaska Airlines. I'd like to fill the gaps for the other major North American carriers. I'm currently working on re-painting the United/Continental aircraft because the two companies merged in November 2011 & consequently have new paint schemes. They have the Continental markings but the United brand name. I've already done a <clone &> logo change on Vulcan's Continental 737-824 and an equivalent re-badge on the Dash-8-400. I still have to re-skin the B767, B737-400, B747-400 & A320 pretty much from scratch. There are no B777, B757, Embraer E190, or Bombardier CRJ models to work with at this point but I will probably do a Gulfstream mimic for the CRJ-200 as well.
Stay Tuned.
Last edited:
http://img641.imageshack.us/img641/6286/papou201111150001r.jpg
hey papou, could you lead me to the people n this shot please.
Thanks in advance
Josh
hey papou, could you lead me to the people n this shot please.
Thanks in advance
Josh
Nice work on the B737 Pascal!
Are you doing any other North American ones at the moment so we can make sure we are not overlapping?
I'm currently doing a B767-400ER Continental (outgoing Continental markings) & shortly the following in new United Airlines in post merger colours: - Dash 8-400 (uploaded) B737-824 (uploaded), B737-232, B747-400, B767-300ER, B767-400ER & A320-232
I haven't started but intend repainting a Dash 8-400 in Air Canada Express livery to finish off the Air Canada set.
Gordon,
You're finding loads in 3D Warehouse aren't you? Didn't realise the Antinovs had twin tails. Interesting.
Cheers
Rob
Are you doing any other North American ones at the moment so we can make sure we are not overlapping?
I'm currently doing a B767-400ER Continental (outgoing Continental markings) & shortly the following in new United Airlines in post merger colours: - Dash 8-400 (uploaded) B737-824 (uploaded), B737-232, B747-400, B767-300ER, B767-400ER & A320-232
I haven't started but intend repainting a Dash 8-400 in Air Canada Express livery to finish off the Air Canada set.
Gordon,
You're finding loads in 3D Warehouse aren't you? Didn't realise the Antinovs had twin tails. Interesting.
Cheers
Rob
Last edited:
Thanks Rob,
This United B737 was done following a request from Stmsoccer.
I am not going to make other Continental planes liveries at the moment.
There are so many airlines in North America, that there is little chance of overlapping!
I should go back now to European companies.
Pascal
This United B737 was done following a request from Stmsoccer.
I am not going to make other Continental planes liveries at the moment.
There are so many airlines in North America, that there is little chance of overlapping!
I should go back now to European companies.
Pascal
This model was not from the warehouse, exported through 3ds max, I think my days of using google sketchup and the 3d warehouse may be coming to a close.
It had twin tails so it could carry the Russian Space Plane.
Gordon
Last edited:
still looking for some more people for this, but here is a start
when you actually get this airport, you will realize it is not exactly prototypical, but right now there is a lack fo well sceniced airport for you to run. Therefore, I started this one which will be released within a week or two. It is fairly simple, but has good scenery and details.
when you actually get this airport, you will realize it is not exactly prototypical, but right now there is a lack fo well sceniced airport for you to run. Therefore, I started this one which will be released within a week or two. It is fairly simple, but has good scenery and details.
Last edited:
Ho Ho, starting to look nice, Stmsoccer!
Good atmophere is coming.
I checked for the people series I use in my maps and can give you a small list of Usernames: You are using some of them already.
Bobsanders-Jytte-Shoves-Smileyman-Dreddman-Lotharhake-Neoklai75-Elvenor6
There are of course many others.
Pascal
Good atmophere is coming.
I checked for the people series I use in my maps and can give you a small list of Usernames: You are using some of them already.
Bobsanders-Jytte-Shoves-Smileyman-Dreddman-Lotharhake-Neoklai75-Elvenor6
There are of course many others.
Pascal
We have a company here in New Zealand making fire trucks similar to the Oshkosh fire truck.
Here's there site with pics and specs
http://www.mills-tui.co.nz/airport.htm
Gordon
Here's there site with pics and specs
http://www.mills-tui.co.nz/airport.htm
Gordon
georgialonestar
New member
Nice work on those
Nice work on your DC-10s. . currently due to restrictions on DLS I guess unfortunately those are not available for TRS 2006. . .I would like to see those however. Would that be something you would consider releasing? Also would like to see the Boeing 747 released in colors for Pan Am and Delta (1970s livery although Delta did not own any of these prior to the merger with Northwest)
Nice work on your DC-10s. . currently due to restrictions on DLS I guess unfortunately those are not available for TRS 2006. . .I would like to see those however. Would that be something you would consider releasing? Also would like to see the Boeing 747 released in colors for Pan Am and Delta (1970s livery although Delta did not own any of these prior to the merger with Northwest)