Missing KUIDS? Post them here!

Missing from Twin Peaks Railway Company Route 2021 WIP

<kuid:565830:100206>
<kuid2:60238:27112:1>

<kuid:565830:100206>: (TS12) Grass Dark Rocky Ground. Listed as payware and part of Kickstarter County, Belarusian Woodland and Walwick-Wallangarra
<kuid2:60238:27112:1>: Timber Stack 1 by Vulcan part of ECML Edinburgh-Dundee
 
Any ideas on these?

<kuid:164663:25310> , <kuid:164663:25311> tinotos
<kuid:146087:27222> , <kuid:146087:27561> robertoconti19
<kuid:128184:27020>, <kuid:128184:28260> roslas
<kuid2:46162:28007:10> josefpav
 
Any ideas on these?

<kuid2:164663:25310:2> Bidoni vecchi 1 • <kuid:164663:25310> from "Donner Pass"
<kuid2:164663:25311:2> Bidoni vecchi 2 • <kuid:164663:25311> from "Donner Pass"
<kuid:146087:27222> Nocciolo_2 • from "Donner Pass"
<kuid:146087:27561> Pino 23m
<kuid2:128184:27020:1> ROLT Trafooszlop 3 • from "Route Romania" • <kuid:128184:27020> from "Route Romania" and "TransMontana"
<kuid:128184:28260> olajos
<kuid2:46162:28007:10> Engine shed Essex • from "Marias Pass X45"
 
Thanks you for those replies. I have the Maria's PassX installer. Will that go into 2019?

Donner Pass was TrainzItalia, wasn't it?
 
I have the Maria's PassX installer. Will that go into 2019?

I installed it but uninstalled quickly (many faulty assets). If you extract the files from the installer you will find <kuid2:46162:28007:10> in "content14.cdp".

Donner Pass was TrainzItalia, wasn't it?

Yes (a new version was announced on the old site some time ago).
 
<kuid:-25:981>, <kuid:-25:983>, <kuid:-25:995>, <kuid:-25:994>, <kuid:-25:998>, <kuid:-25:999>, <kuid:-25:1000>, <kuid:523:19723381>,
<kuid:523:19723378>, <kuid2:63290:24045:2>, <kuid2:63290:24046:2>

Just making sure that all the payware I have installed to TS19 SP3 doesn't have any missing dependencies. Here are the missing kuids and I'm using Build 111782.
 
<kuid:-25:981>, <kuid:-25:983>, <kuid:-25:995>, <kuid:-25:994>, <kuid:-25:998>, <kuid:-25:999>, <kuid:-25:1000>, <kuid:523:19723381>,
<kuid:523:19723378>, <kuid2:63290:24045:2>, <kuid2:63290:24046:2>

Just making sure that all the payware I have installed to TS19 SP3 doesn't have any missing dependencies. Here are the missing kuids and I'm using Build 111782.

These are built-in.

Ensure there's nothing open for edit.

Make sure you download all the content from the content store such as TANE updates and other fixed assets supplied by N3V.

I also recommend running an EDR. Hold down CTRL-key while choosing Repair database from Developer menu on either the menu bar on the Launcher or on the menu bar on Content Manager.
 
I am looking for the following kuid

<kuid2:45324:251025:1>
searched on TKI and found this description JR MS CableX W 06 LD
I believe it is from Jointed Rail, but a search for that description did not find anything

thanks for any help
 
I am looking for the following kuid

<kuid2:45324:251025:1>
searched on TKI and found this description JR MS CableX W 06 LD
I believe it is from Jointed Rail, but a search for that description did not find anything

thanks for any help

The asset is from JR's Mojave Sub payware route included with TS12 and available for purchase from N3V.
 
Thank you very much. Do you know what the asset is, will the routes be missing something major without it?

It's a searchlight signal, Left hand drive. This signal, if used correctly, is used where track goes from single to double. JR's new SL(06) L are the equivalent.

<kuid2:506034:571380:1> JR SL(06) 2-H-L center 15ft
<kuid2:506034:501835:2> JR SL(06) 2-H-L center wide 20ft
<kuid2:506034:501379:2> JR SL(06) 2-H-L center 20ft

You can't replace the signal by editing the config.txt file, but you can find where it's located on the route. In the main menu under settings (The 3-lines) in TRS19 its self, turn on the option to Show missing assets. These will show up as orange cubes.

Go to that location and place your signals you need to, and then run Delete Missing Assets. This is found under the tools where you switch between Driver and Surveyor.

Hope this helps.
 
It's a searchlight signal, Left hand drive. This signal, if used correctly, is used where track goes from single to double. JR's new SL(06) L are the equivalent.

<kuid2:506034:571380:1> JR SL(06) 2-H-L center 15ft
<kuid2:506034:501835:2> JR SL(06) 2-H-L center wide 20ft
<kuid2:506034:501379:2> JR SL(06) 2-H-L center 20ft

You can't replace the signal by editing the config.txt file, but you can find where it's located on the route. In the main menu under settings (The 3-lines) in TRS19 its self, turn on the option to Show missing assets. These will show up as orange cubes.

Go to that location and place your signals you need to, and then run Delete Missing Assets. This is found under the tools where you switch between Driver and Surveyor.

Hope this helps.

It helps a lot!
Thanks for the info and taking the time to explain it.
 
<kuid:95230:102375>
<kuid:95230:110353>
<kuid:95230:110335>
<kuid:95230:110251>

These are by jjeff1955, missing from stouthm's Western Pacific King TRS19 v2
 
I just downloaded the updated River Valley Narrow Gauge Route and have two
unknown assets:

kuid 57230:45032 author jango
kuid 313503:1103 author srr89

I am running Tane SP4. Could someone please identify what these assets are, and maybe
tell me where I can get them.

Thanks in advance
Steve
 
I just downloaded the updated River Valley Narrow Gauge Route and have two
unknown assets:

kuid 57230:45032 author jango
kuid 313503:1103 author srr89

I am running Tane SP4. Could someone please identify what these assets are, and maybe
tell me where I can get them.

Thanks in advance
Steve


The second asset by srr89 is an Agence Metropolitaine de Transport de Montreal (AMT) F7A #1306.

HTH


Gisa
 
Back
Top