Midwest & Mojave Content Expansion Packs Sessions

Thanks Firefighterdan, the last KUID works for me too. Maybe I could replace the rest of missing KUIDs this way, but I'm not sure, I could to do something wrong. Maybe some cars are important for the session...
 
I am missing the following dependencies:
kuid:175455:100645
kuid:175455:100646
kuid:175455:100647
kuid:175455:100648
kuid:175455:100649
kuid:175455:100659
kuid:175455:100661
kuid:175455:100662
kuid:175455:100663
kuid:334896:120024
kuid:334896:200044

Any help is greatly appreciated.

These belong to the Midwest Grain's Pioneer Local Session. The only missing dependencies for the route.
 
Last edited:
Hey guys. I wrote a pretty nifty session for myself the other day and it involved grain hoppers. Only problem was that I could not get any of the industries to work and load me up. The grain cars were OK for industry, too. Any ideas?

LouP
 
I too am missing some kuids for Harvest Loads. 2:45324:300030:1,2:45324:300031:1 and the Pioneer Local 175455:100692,334896:120024,334896:200044,2:334896:200023:2,2:46162:60006:10 Any help greatly appreciated. Alco_P-A
:D
 
Alco_P-A said:
I too am missing some kuids for Harvest Loads. 2:45324:300030:1,2:45324:300031:1 and the Pioneer Local 175455:100692,334896:120024,334896:200044,2:334896:200023:2,2:46162:60006:10 Any help greatly appreciated. Alco_P-A
:D
Click to expand...
Kuid2:45324:300030:1 and kuid2:45324:300031:1 are the JR 3 Bay Hoppers atsf & bn.
 
check your open for edit in cmp and see if they weren't committed. I would bet they are there if you downloaded and installed them and they still don't show. Also if they happen to show a red error button use the check for errors tab and that should fix it. There are no errors with the assets but I have noticed sometimes my cmp will say they are in error. Doing a error check fixes that and they are fine and work from then on.
 
Checked open for edit stuff,commited everything in there. No red arrows. Same missing assets as listed here are still showing as unknown in CM missing assets column.
 
I'm sorry, but how work portals there? I tried to create and save train consist and send it from East Portal to West Portal. Maybe it's not problem with this route and I'm doing it wrong.

I used this rule:

main.php


This is a settings of Consist Check rule:
main.php


I set my consist and go from East Portal after 1 minute:
main.php


Next was to choice drive and order him go to West Portal:
main.php


But it doesn't work, train doesn't appear at all. What I'm doing bad??
 
Midwest Grain missing assets:

<kuid2:175455:100173:1>
<kuid2:175455:100193:1>
<kuid2:175455:100194:1>
<kuid:175455:100623>
<kuid:175455:100628>
<kuid:175455:100629>
<kuid:175455:100630>
<kuid:175455:100634>
<kuid:175455:100635>
<kuid:175455:100644>
<kuid:175455:100692>

<kuid:156765:1781>
<kuid:156765:1783>
<kuid2:45324:24300:3>
<kuid2:45324:24301:3>
<kuid2:45324:24304:3>
<kuid2:45324:24305:3>
<kuid2:45324:24307:2>
<kuid2:45324:24310:3>
<kuid2:45324:300030:1>
<kuid:334896:120024>
<kuid2:334896:200023:2>
<kuid:334896:200044>
<kuid2:46162:60006:127>

please help find them, thanks
 
I did read this entire thread last night and downloaded many cdp mostly from JR. The initial list was larger, these are the remaining missing after more than 5 hours downloading and installing.
thanks
 
Firefighterdan said:
<kuid:156765:1781> Locomotive fireman/conductor

<kuid:156765:1783> Locomotive engineer

Did you get the updated signal pack from Jointed Rail? Some of your missing kuids are searchlights. You need to be logged in to get them. http://jointedrail.com/index.php/freeware/signals.html
Click to expand...

that help get some, many thanks, still missing:

Unknown Location: <kuid2:175455:100173:1>
Unknown Location: <kuid2:175455:100193:1>
Unknown Location: <kuid2:175455:100194:1>
Unknown Location: <kuid:175455:100623>
Unknown Location: <kuid:175455:100628>
Unknown Location: <kuid:175455:100629>
Unknown Location: <kuid:175455:100630>
Unknown Location: <kuid:175455:100634>
Unknown Location: <kuid:175455:100635>
Unknown Location: <kuid:175455:100644>
Unknown Location: <kuid:175455:100692>
Unknown Location: <kuid2:45324:300030:1>
Unknown Location: <kuid:156765:1781>
Unknown Location: <kuid:156765:1783>
Unknown Location: <kuid:334896:120024>
Unknown Location: <kuid2:334896:200023:2>
Unknown Location: <kuid:334896:200044>
Unknown Location: <kuid2:46162:60006:127>
 
jointedrail said:
Hi Lou!

Sessions have been pulled and are being revamped to figure out the issues. They will be re-released to those that purchased the expansion packs.

Thanks
Click to expand...

Did this ever happen? I bought both expansion packs and haven't heard a thing about the sessions.
 
For Midwest Grain there are some at the below link, for the v1.2 of the route which is also on the page. These are betas as we work out the kinks on the sessions

Note that these sessions REQUIRE the Content Pack so only those who have purchased this should be trying to use these.

http://jointedrail.com/index.php/routes/midwest-grain-v1-2.html

Mojave sessions have yet to be re-released at this time.....
 
I don't know if this is related to the known SP1 sound issues, but in all the MW Grain and Mojave sessions, the sound drops out whenever a locomotive either starts or stops. I have to open the options menu to fix it, which can be a pain in spotting and switching. Also, except for the Mojave to Bakersfield session , the other Mojave sessions seem to be Cab Mode only, no DCC. Is this correct? I'm really not a cab mode guy.
 
boc61 said:
I don't know if this is related to the known SP1 sound issues, but in all the MW Grain and Mojave sessions, the sound drops out whenever a locomotive either starts or stops. I have to open the options menu to fix it, which can be a pain in spotting and switching. Also, except for the Mojave to Bakersfield session , the other Mojave sessions seem to be Cab Mode only, no DCC. Is this correct? I'm really not a cab mode guy.
Click to expand...


Sound is related to the SP1 problem. As far as the sessions i dont see why they wouldnt be able to be used on both, its just a control method after all. If its the stock session that is broken maybe this is something else messed with SP1 that hasnt been found previously....
 
yutzk said:
Sound is related to the SP1 problem. As far as the sessions i dont see why they wouldnt be able to be used on both, its just a control method after all. If its the stock session that is broken maybe this is something else messed with SP1 that hasnt been found previously....
Click to expand...

If by stock session you mean Mojave to Bakersfield, that is the only one that gives the control option. The other Mojave sessions bring you to cab mode with no option to choose.

ETA: I just started up all the built in sessions and they don't seem to have the sound issue, nor do the Maria's Pass sessions. It seems limited to Mojave and MWG. I don't know if that is of any help.
 
Last edited:
You must log in or register to reply here.

Similar threads

D
Mojave to Bakersfield Session Question
2
Replies
20
Views
3K
brucem56
B
S
  • Locked
[Resolved] Connection issue with the Firstclass DLS server
Replies
1
Views
538
Spiffy
S
Z
multiple versions with same build at 1 pc
Replies
4
Views
517
JCitron
J
n3vpolsen
  • Sticky
Trainz Simulator: World Tour ( beta ) - Xbox Testing
2
Replies
23
Views
3K
Driver_Ross
D
Z
SP5 Update causing texture issues
2
Replies
37
Views
3K
JCitron
J
Back
Top